You are currently viewing : Sponsors



MPR Services

1201 FM 646
Dickinson
TX 77539-3014
USA


Tel : +1 281 337 7424

Fax : +1 281 337 6534

infomprservices@tkinet.com

www.mprservices.com

Number: 10 Page:  [1] 2 »
Display: 

Cyanide corrosion causes costly upsets

Refinery cyanides cause considerable corrosion, hydrogen blistering and waste water treatment problems. The majority of refinery cyanides are formed in the reactor of fluid catalytic cracking (FCC) units. All of the gas from the reactor, including the cyanide, is carried overhead into ...


Removal of foaming

In a recent case history, an East Coast Refinery was experiencing frequent upsets in their amine system due to foaming. MPR Services was contacted and brought in their SigmaPure™ System. SigmaPure removed the foaming agents and the unit returned to optimal operations. Operations ...


Bicine can be controlled

Bicine is a very corrosive degradation product produced in certain DEA and MDEA systems. Amine system operators must take steps to minimize O2 and SO2 incursion into the amine system and will need to monitor Heat Stable Salts and Amino Acids (Bicine) concentrations in the amine.


Understanding amine system terminology

As we work with valued customers in our business, we have come to realize that there is confusion with some of the terms used to describe amine systems. Some of these terms such as Heat Stable Salts, Heat Stable Amine Salts, Lean Loading, Bound Amine, etc may need clarification. We explain ...


Using chemical analysis to diagnose amine upsets

Using chemical analysis from your amine supplier to diagnose your amine system? Understanding the link between the analysis report and the amine system operation can be foggy. MPR Services, Inc. shares clear understandings and provides solutions to amine hygiene.