You are currently viewing: Literature


Number: 18 Page:  [1]
Display: 

Literature

Advanced flare and flare system designs

UOP Callidus prides itself in providing economical high destruction efficiency, high smokeless, low noise, low radiation flares for a broad range of flare applications. Through our engineering expertise, manufacturing capabilities and worldwide service, UOP Callidus has become a leading ...


Callidus low NOx staged gas burner (CSGL)

The UOP Callidus (CSGL) is rapidly becoming the preferred staged gas low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas.The new design also increases ...


Callidus ultra-blue burner (CUBL)

The UOP Callidus Ultra-Blue (CUBL) is rapidly becoming the preferred Ultra-low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas. The new design ...


HexWall™/ Vectorwall™ case study

Furnace baffles – a long history of problems. Sulphuric acid plant furnace baffles historically are labor intensive, expensive to install, require long shut downs for refractory cure times, are susceptible to cracking, and have a poor reputation for collapsing due to their inherent ...


ITW Online Cleaning

Will revolutionize turnaround operations and operational excellence by optimizing: productivity, operability, safety health and environment, reliability, product quality, energy efficiency, CO2 SOX NOX VOC emissions, maintenance and repair and operational requirements. An entire Unit can ...


MECS® - Thermo Z™ the optimum–H™ system

The ideal design solution for MECS–Thermo Z gas to gas heat exchangers to eliminate cold end corrosion. When gas temperatures and dew point conditions require maximum corrosion protection from cold spots, the Optimum-h™ System can provide a value engineered approach to raising ...


MECS® HexWall™ Baffles

For sulfuric acid plant sulfur burners and spent Acid recovery furnaces. Interlocking hexagonal ceramic blocks for fast installation and superior structural stability. MECS® HexWall™ is a versatile, mechanically stable system consisting of a series of stackable six-sided blocks ...


MECS® Sulfox™ process

The SULFOX™ process is based on the thermal and catalytic conversion of sulphur-bearing compounds into sulphuric acid. Depending on the feed gas conditions, customised plant types are offered. For low concentrations, the feed gas is preheated to the required catalyst inlet temperature ...


MECS® sulfuric acid and environmental technologies

Is the leading provider of proprietary process technology, speciality products and technical services to the global sulfuric acid industry. MECS® has provided best-in-class sulfuric acid plant processes, clean technologies, and specialty products to a wide distribution of industries ...


MECS®–Thermo Z™ welded plate heat exchangers

Plant engineers in the know choose MECS®–THERMO Z™ for maximum waste heat recovery and the best delivered value. MECS®–ThermoZ™ is a highly efficient heat exchanger suitable for many industrial processes where gas temperatures may be up to 1500°F (816°C). ...


On-line heater and boiler chemical cleaning technology

GTC’s fired heater cleaning solves common process feed heater problems. With rising pressure to reduce energy costs, GTC’s advanced fired heater/boiler chemical cleaning technology is an effective way to improve heater efficiency without shutting down plant operations. Our ...


Process heater burners, flare systems, thermal oxidizers, catalyst systems

With over two decades of overcoming combustion and emissions challenges, UOP Callidus consistently leads the industry by setting the standards for maximum performance and minimum emissions. Burners that set the standards: Innovation and technology are the keys to UOP Callidus burners. ...


Reducing flare emissions

UOP Callidus Technologies by Honeywell, a leading provider of flare systems, is pleased to offer our Flare Gas Recovery (FGR) technology in conjunction with its broad range of flare system capabilities. With a heritage of technical expertise, UOP Callidus prides itself in providing economical ...


Selective catalytic reduction and catalytic oxidation

Reducing NOx and CO levels for simple-cycle systems, heat recovery steam generators, package boilers, and thermal oxidizers. UOP Callidus delivers technically superior emission control products and services to the power, petrochemical, and refining industries. Our Selective Catalytic ...


The UOP Callidus scepter pilot and scepter model P1 portable igniter

Meeting the refining and petrochemical challenge. As a result of the efforts of UOP Callidus engineers and with input from our customers, the Scepter Pilot was developed. The new pilot system was designed at the world-class industrial scale, UOP Callidus Research and Test Facility, and ...


Thermal oxidizer systems

UOP Callidus is an industry leader in environmental and combustion technology. We have provided incinerators for a wide variety of gas and liquid wastes including inorganic particulate, various acids and hard-to-burn organic compounds. Our experience extends to development and implementation ...


UOP Callidus installation services

Installation Services: UOP Callidus offers turnkey installation and aftermarket support for our products around the world. Our goal is to provide first class service from professionals who have years of experience with our equipment and understand how it should be installed and operated ...


UOP Callidus Jade burner

The Jade Burner from UOP Callidus is the first ultra-low NOx Tail Gas Thermal Oxidizer Burner designed and built specifically to deliver ultra-low Nox emissions with no special physical or operational requirements. In many cases, incorporating the Jade burner into a thermal oxidizer results ...