You are currently viewing: Literature



Modular instrumentation system

Kenmac Series Modular 85 System: provides a standard modular instrumentation interface and mounting system, 2 and 4 valve pressure and differential pressure manifolds, instrument monoflanges for isolation and vent functions, single and double purge blocks, electric heaters, steam trace blocks, seal pots, filling connectors, protective shade, mounting plates and ancillary components (transmitter not included).

Sponsor : Swagelok Company

Other Literature

Variable area flowmeters

Variable Area Flowmeters: G Series and M Series: Simple installation, easy to read, no wearing parts, limit switches available.


Modular instrumentation system

Kenmac Series Modular 85 System: provides a standard modular instrumentation interface and mounting system, 2 and 4 valve pressure and differential pressure manifolds, instrument monoflanges for isolation and vent functions, single and double purge blocks, electric heaters, steam trace blocks, seal pots, ...


Pressure regulators

Pressure Regulators: Pressure reducing and back-pressure models, gas cylinder changeover model, vaporizing models.


One-piece instrumentation ball valves

One-piece Instrumentation Ball Valves: 40G and 40 series: On-off, switching, and crossover flow paths, working pressures up to 3000 psig, environmental and heated applications


Plug valves

Plug Valves: P4T and P6T Series: Working pressures up to 3000 psig, Swagelok tube fitting and NPT and ISO tapered pipe end connections, brass and stainless steel materials.


Temperature measurement devices

Bimetal Thermometers: Actuated by a bimetal helix coil, silicone-free gel inserts dampen vibration effects, and cases are hermetically sealed in accordance with ASME B40.200 to prevent fogging and moisture damage to internal components.


Process interface valves

Kenmac Series Process Interface Valves and Process Monoflanges: stainless steel, carbon steel and duplex stainless steel materials, pressure ratings and flanged connections in accordance with ASME B16.5, ball valve bore sizes from 3/8 to 2 in.


Instrument manifolds

Instrument Manifolds: V, VB, and VL Series: Stainless steel, carbon steel and duplex stainless steel materials, minimized potential leak points, easy installation and maintenance.


Proportional relief valves

Proportional Relief Valves: R Series: liquid or gas service, set pressures from 10 to 6000 psig, 1/4 and 1/2 in. and 6 to 12 mm end connections.


Quick-connects

Quick-connects: QC, QF, QM, and QTM Series: Design minimizes, spillage and air inclusion, wide variety of configurations, end connections, and stem and body connectors, Instrumentation, Full-Flow, Miniature, PTFE-Sealed.