logo

You are currently viewing: Literature

Back

Separation technology

Sulzer Chemtech produces a wide array of tower internals. With this broad spectrum of custom-designed fractionation trays, random and structured packing we can meet any process requirement in any size tower throughout the chemical, refining, petrochemical, and gas processing industries. For over 50 years, Sulzer Chemtech has been serving these industries with
our innovations, which set a new standard in many applications.

For classical column operations such as distillation, absorption, stripping and extraction, and for alternatives such as crystallization, membrane permeation and reactive distillation, we are continuously developing new product ideas to meet the economical and technical objectives of our customers. For numerous applications Sulzer Chemtech provides superior plant performance, improved product quality, increased capacity, and reduced energy consumption.

Sulzer Chemtech offers the full range of column internals with trays, random and structured packings optimized through column simulation, process design, basic engineering and field services.

Sulzer Chemtech is a worldwide leading supplier for separation technology; thanks to our customers and the confidence they instill into our products and capabilities.

From the very first to the very last of our more than 30,000 columns in operation we have never stopped listening to our customers about their needs. At Sulzer Chemtech, we are eager to develop a successful application for your needs.

DOWNLOAD LITERATURE

Sponsor:

Categories:

View More

  • Tray designs for extreme fouling applications

    Today refiners experience a lot of problems with processing of opportunity or heavy crudes. Such crudes have very high sulfur content and require the addition of amine scavengers before desalting. These amines decompose in the heater and create ammonium chlorides in the presence of water in the top of ...

  • Anti-fouling trays maximize coker main fractionator profitability

    The Coker Main Fractionator is systematically subjected to harsh operating conditions that can lead to deteriorating efficiency and performance due to coking and fouling. Poor reliability results in loss of profitable coking margins for the refinery. The main fractionator vapor feed from the coke drum ...

  • Improve separation in your column by increasing the number of trays

    Refiners often face revamp challenges when trying to improve separation within an existing column. Improving diesel recovery from gas oil, splitting benzene precursors from naphtha reformer charge, or simply minimizing product overlaps after capacity creep can all be difficult when limited by a fi xed ...

  • Gain 5-10% efficiency with this simple 4-pass tray revamp

    The design of 4-pass trays can be complex. It not only requires a close evaluation of the mechanical design but also the process response to that design at various flow rates. The balancing of the fluid flows across the tray can have a substantial effect on the tray performance, namely efficiency. Many ...

  • Proper design of mass transfer internals in the FCC flue gas scrubber can help reduce PM emissions

    The EPA’s New Source Performance Standards (40 C.F.R. §60.100-1-0, subpart Ja) regulates refinery particulate emissions, including the discharge of catalyst fines from the FCCU flue gas scrubber stack. Because refiners have traditionally correlated particulate matter (PM) emissions with FCCU ...

  • Improve fouling resistance in your wastewater benzene stripper

    Benzene stripper columns, built so that refineries can meet the National Emissions Standards for Hazardous Air Pollutants (NESHAP), operate with several unique conditions – low vapor rates, high liquid loads, and a high tendency toward fouling make designing well-balanced, effective internals difficult. The ...

  • Important tray design features that improve column operating reliability

    How often does Maintenance personnel open a column during a shutdown and find tray panels fallen without any obvious damage? How about tray valves stuck in the bottoms pump suction? While the initial reaction may be to blame faulty installation where the hardware was not properly tightened, the answer ...

  • Green design practices: focus on efficiency

    Green design is more than recycling scrap materials or calculating carbon footprints. It minimizes negative environmental impact through skillful design and operating practices to produce efficient, better-functioning processes. Because green practices reduce resource requirements, in many cases, they ...

  • 4 simple ways to convert turnarounds into profitable tower upgrade opportunities

    With planned outages commonly occurring at intervals of 2-5 years, a refinery turnaround is a prime opportunity to replace column and separator internals with the newest available technology. Planning for an outage with a “replacement-in-kind” strategy will address lost performance from refinery ...

  • Maximizing light cycle oil recovery in the FCC main fractionator

    Refiners operating FCCU's have adjusted their operating strategies to maximize light cycle oil production to meet the increased demand for automotive diesel. Catalyst formulations and reactor conditions can alter yields, but the refinery cannot take full advantage of the increased LCO recovery without ...

SPONSORS