You are currently viewing: Literature



The UOP Callidus scepter pilot and scepter model P1 portable igniter

Meeting the refining and petrochemical challenge. As a result of the efforts of UOP Callidus engineers and with input from our customers, the Scepter Pilot was developed. The new pilot system was designed at the world-class industrial scale, UOP Callidus Research and Test Facility, and only released after three years of extensive evaluation.

The Scepter Pilot is available in two models to meet the demands of industry. UOP Callidus Scepter Pilot is available in two models, the original permanent Scepter Pilot and the Scepter Model P1 portable igniter. Each is designed to address the rugged requirements of the refining and petrochemical industries. With selfcontained electronics, stainless steel construction throughout, hermetically sealed flame and ignition rods, the Scepter pilots stand up to rough handling and severe service. The high internal energy igniter cannot short out and the flame rod is impervious to moisture, providing reliable spark ignition, light-off and monitoring. For dependable, non-compromising pilot performance, turn to the Scepter.

Other Literature

Process heater burners, flare systems, thermal oxidizers, catalyst systems

With over two decades of overcoming combustion and emissions challenges, UOP Callidus consistently leads the industry by setting the standards for maximum performance and minimum emissions. Burners that set the standards: Innovation and technology are the keys to UOP Callidus burners. For over two decades, ...


Callidus ultra-blue burner (CUBL)

The UOP Callidus Ultra-Blue (CUBL) is rapidly becoming the preferred Ultra-low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas. The new design also increases ...


Callidus low NOx staged gas burner (CSGL)

The UOP Callidus (CSGL) is rapidly becoming the preferred staged gas low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas.The new design also increases the tile ...


Advanced flare and flare system designs

UOP Callidus prides itself in providing economical high destruction efficiency, high smokeless, low noise, low radiation flares for a broad range of flare applications. Through our engineering expertise, manufacturing capabilities and worldwide service, UOP Callidus has become a leading provider of flare ...


Thermal oxidizer systems

UOP Callidus is an industry leader in environmental and combustion technology. We have provided incinerators for a wide variety of gas and liquid wastes including inorganic particulate, various acids and hard-to-burn organic compounds. Our experience extends to development and implementation of Thermal ...


Selective catalytic reduction and catalytic oxidation

Reducing NOx and CO levels for simple-cycle systems, heat recovery steam generators, package boilers, and thermal oxidizers. UOP Callidus delivers technically superior emission control products and services to the power, petrochemical, and refining industries. Our Selective Catalytic Reduction (SCR) ...


The UOP Callidus scepter pilot and scepter model P1 portable igniter

Meeting the refining and petrochemical challenge. As a result of the efforts of UOP Callidus engineers and with input from our customers, the Scepter Pilot was developed. The new pilot system was designed at the world-class industrial scale, UOP Callidus Research and Test Facility, and only released ...


UOP, A Honeywell Company, changing the world one solution at a time

Honeywell UOP processes have changed the world. Since the groundbreaking introduction of the Dubbs Process in 1914, Honeywell UOP’s engineers and chemists have excelled in turning laboratory science into industrial reality, establishing the foundation for today’s modern refining industry.


UOP Callidus Jade burner

The Jade Burner from UOP Callidus is the first ultra-low NOx Tail Gas Thermal Oxidizer Burner designed and built specifically to deliver ultra-low Nox emissions with no special physical or operational requirements. In many cases, incorporating the Jade burner into a thermal oxidizer results in the lowest ...


Advanced combustion solutions for production applications

We Pride Ourselves On Quality UOP Callidus develops flare systems for hydrocarbon processing, oil and gas production, steel, carbon black and petrochemical processing industries. Each of these flare systems is built to match the customer’s specific process criteria and performance requirements. ...