Back

H2S oxidation system for water treatment facilities

A new water treatment facility in the town of Jupiter, Florida, was causing a serious odor problem. H2S removed from the purified water was being released into the atmosphere. Complaints about the odor came from the residences and businesses downwind of the treatment plant.

A turnkey LO-CAT® Hydrogen Sulfide Oxidation System designed to process 30,000 CFM of air containing 250 ppm of H2S solved this problem.

Due to the scarcity of fresh water available for treatment by conventional means, the town of Jupiter chose to be the first in southeast Florida to drill into the Floridan aquifer, located approximately 1,200 feet below ground.

A 6 MGD treatment plant, consisting of reverse osmosis, air stripping and chemical treatment, was designed by the engineering firm retained by the town. Because the well water is brackish and contains dissolved H2S, it must undergo pre-treatment prior to entering the town’s regional water distribution system.

In the reverse osmosis process, the aquifer’s brackish water is pressurized and forced through a semipermeable membrane. The dissolved CO2 and H2S pass through the membrane along with the purified water. The purified water is then passed through an air stripper to remove the dissolved H2S and CO2.

DOWNLOAD LITERATURE

Sponsor:

Merichem Technologies

Categories:

Caustic services

For 65 years, Merichem has provided environmentally responsible handling of spent caustics and other secondary materials that result from refining, natural gas and petrochemical processing. Merichem Caustic Management Services safely transports your secondary materials to Merichem manufacturing facilities ...
LO-CAT - the green solution to sulfur recovery

The LO-CAT process, available exclusively from Merichem, is a patented liquid redox system that uses a proprietary chelated iron solution to convert H2S to innocuous, elemental sulfur. It does not use any toxic chemicals and does not produce any hazardous waste byproducts. The environmentally safe catalyst ...
FIBER FILM - Non-dispersive hydrocarbon treating

Introduced in 1974, the FIBER FILM® Contactor is the foundation for a variety of caustic, amine and acid treating processes. Merichem processes using FIBER FILM Contactors have been licensed worldwide and successfully applied to treating problems throughout the hydrocarbon processing industries. ...
NAPFINING™ Naphthenic acid removal

NAPFINING™ technologies were first licensed in 1977 and to date Merichem has granted 78 unit operating licenses world-wide. The non-dispersive FIBER FILM® Contactor achieves reduced capital expenditure and less plant space requirements compared to most treating alternatives, making NAPFINING™ ...
THIOLEX™ caustic extraction of acid gas

THIOLEX™ technology was rst licensed in 1980 and to date Merichem has granted 224 unit operating licenses world-wide. The non-dispersive FIBER FILM® Contactor achieves reduced capital expenditure and less plant space requirements compared to most treating alternatives, making THIOLEX™ ...
MERICON™ spent caustic processing

MERICON™ technology provides an on-site solution for the processing of spent caustics to reduce their biological oxygen demand (BOD) and chemical oxygen demand (COD), control odor, adjust acidity and destroy phenolics. Merichem Company’s patented technology produces a neutral brine effluent ...
MERICAT™ H2S & mercaptan sweetening

MERICAT™ technologies were first licensed in 1977 and to date Merichem has granted 194 unit operating licenses world-wide. The non-dispersive FIBER FILM® Contactor achieves reduced capital expenditure and less plant space requirements compared to most treating alternatives, making MERICAT™ ...
LO-CAT® process for waste water treatment plants

In 1980, Los Angeles began exploring alternatives to control the H2S concentration in the digester gas produced at the Hyperion Waste Water Treatment Plant (WWTP), which treats nearly 420 MGD, wastewater generating over 475 tons of raw sludge per day. The digester gas H2S concentration had to be controlled ...
LO-CAT® process for sulphur recovery / odor control

The LO-CAT® Hydrogen Sulfide Oxidation System provides economical H2S removal to solve odor problems quickly and effectively. LO-CAT achieves H2S removal efficiencies exceeding 98%. The system also eliminates costly once-through chemicals, offers unique mobile bed contacting material, and reduces ...
H2S oxidation system for refinery desulfurization

The European Union has recently promulgated new directives reducing the amount of residual sulfur in diesel and gasoline. These directives are requiring European refineries to revise both their fuel production processes and their downstream desulfurization strategies. One affected refinery is Irish Refining ...