logo


GO-ULTRA™ catalysts

Get more from your gas oil feed streams. Facing today’s economic challenges, refiners worldwide are seeking to restore margins and increase profits by maximizing yields from their operations. For the gas oil market, Albemarle’s research and development team has created a breakthrough fluid cracking catalyst that offers impressive benefits and higher value than existing market offerings.

Albemarle’s GO-ULTRA™ FCC catalyst
Based on the company’s innovative ONYX™ manufacturing technology, GO-ULTRA was designed specifically for application to gas oil feeds. Compared to conventional gas oil catalysts, GO-ULTRA offers better gasoline selectively (up to almost four percent [4%] greater naphtha yields) while significantly reducing coke formation. GO-ULTRA also provides marked bottoms conversion improvement.

GO-ULTRA: Built to perform
Multiple test have consistently verified GO-ULTRA’s performanceadvantages. In four different comparisons between GO-ULTRA and Albemarle’s RUBY™ FCC catalyst (results shown below), all samples were deactivated by mild CD (1000 ppm Ni, 1000 ppm V), followed by ACE testing using a typical VGO. At constant conversion (Figure 1), gasoline increases by two percent (2%) to almost four percent (4%) at the expense of coke and LPG. At constant coke (Figure 2), the trend is equally clear: up to four percent (4%) additional gasoline and a smaller amount of LPG created at the expense of bottoms (slurry).

DOWNLOAD LITERATURE

View More

  • PROvantage™

    Operate in higher propylene mode without changing your base catalyst. PROvantage olefin/octane enhancement additive provides refiners with the flexibility to operate in a high propylene mode without the activity dilution of the base catalyst inventory normally associated with high levels of traditional ...

  • UPGRADER™ and UPGRADER R+

    Improve your FCC unit’s residue feedstock processing and profitability. Unprecedented upgrading of residue in FCC. FCC units using conventional FCC catalysts are severely limited when diffusion constraints control conversion and bottoms upgrading, for example, in heavy-feed and/or short-contact-time ...

  • LRT FCC catalysts

    Albemarle’s low rare earth technology (LRT) products. Driven by its goal to provide customers with comprehensive, economic catalyst solutions and the surge in global rare earth prices, Albemarle has developed and commercialized a range of LRT products. The catalysts available for the VGO market ...

  • UPGRADER™ T and AMBER™ T - meeting the tight oil challenge

    North America’s oil production has been reenergized with the advent of sophisticated technologies to recover tight oil economically. Tight oil, defined as liquid hydrocarbons obtained by hydraulically fracturing shale formations, is flowing at ever increasing rates from fields such as Bakken, North ...

  • SMOOTHFLOW™ FCC additive

    SMOOTHFLOW from Albemarle offers a solution to FCC unit fluidization and circulation problems. Fluidization problems sometimes begin suddenly, often as the result of an unexpected process upset causing significant catalyst losses and possibly mechanical damage inside the unit. The finest catalyst particles ...

  • SOxMASTER-2™

    Optimal SOx reduction without rare earth for partial- and full-burn units. SOx reduction additives are designed to capture and remove the oxidized sulfur compounds present in the FCC unit regenerator and release them in the FCC riser. On release, the sulfur exits the FCC unit as hydrogen sulfide along ...

  • Quantifying FCC gasoline sulfur reduction

    Refiners everywhere have to comply with government-mandated fuel specifications, in particular dramatically lower gasoline sulfur levels. While post-treating remains an option, the associated octane loss creates additional constraints for refiners, particularly those who are hydrogen limited. Regardless ...

  • Quantifying FCC catalyst accessibility

    Accessibility is related to the mass-transfer characteristics of an FCC catalyst. Albemarle has developed a quantitative laboratory test that measures the accessibility of FCC catalyst particles: the first such measurement in the history of FCC. This test has dramatically altered the way refiners select ...

  • OptiFuel™ technology and Albemarle coker additives

    Reduced coke yield and increased operating flexibility. For many years, delayed coking units have played an important role in oil refineries as one of the most cost effective processes to convert vacuum residue into more valuable products. The delayed coking yields are the result of thermal reactions ...

  • DuraSOx™

    Highly attrition-resistant SOx reduction additive without performance compromise. DuraSOx SOx reduction additive is the culmination of intensive development work focusing on obtaining the most attrition-resistant Sox additive on the market without any performance compromises. It follows in the footsteps ...