logo


ReFRESH™ your Catalyst

Topsoe´s ReFRESH™ technology offers you the opportunity to use Haldor Topsoe catalysts twice for maximum economic benefit by reactivation of the catalytically active sites. Activity up to 95+ % of fresh catalyst is restored. The technology is commercially proven with more than 65 references and applicable for spent BRIM® and HyBRIM™ catalysts.

The ReFRESH™ technology is a specialized method of metal redistribution – available only from Topsoe production plants.

Why ReFRESH™ your catalyst?
As refiners deal with the demand for clean fuels with very low sulfur levels, catalyst longevity becomes an increasingly important factor. With the current high costs of metals, a full load of catalyst for a medium-to-large size hydrotreater unit represents a significant capital outlay. With the ReFRESH™ technology Haldor Topsoe offers the refiner new options and an opportunity for a more economic utilization of the procured catalyst.

The ReFRESH™ approach
Once the catalyst has reached end of run, it can be removed from the reactor and subjected to the ReFRESH™ technology. This involves sending the catalyst for regeneration to remove any fines or debris and burn off the carbon and sulfur. Haldor Topsoe’s BRIM® and HyBRIM™ catalysts will regain about 80-85 % (BRIM®) and 60-75% (HyBRIM™) of their original activity after a traditional regeneration. However, for many applications, that would not be enough to reuse the catalyst. Therefore, Haldor Topsoe can offer to treat the catalyst in our manufacturing plants, using our proprietary ReFRESH™ process which restores the activity to 95+ % (BRIM®) and 85-95+% (HyBRIM™) of fresh catalyst.

Advantages
- Prolongs the total cycle and reduces overall costs
- Commercially proven – more than 65 references
- Sustainable solution

DOWNLOAD LITERATURE

View More

  • Slash your hydrogen production costs

    By utilizing low value, excess fuel gas, you can reduce your consumption of costly traditional hydrogen plant feedstocks, such as natural gas, LPG, butane or naphtha. Upgrading fuel gas produced onsite is a proven way to significantly cut the cost of your hydrogen production. Refinery fuel gases are ...

  • Maximize the value of your naphtha feedstocks and downstream processes

    New solutions for changing needs Lighten the burden of heavy feedstocks with Topsoe catalysts, process designs and technologies. If your refinery is like most, you’re under pressure to squeeze more value out of heavier feedstocks, and this presents new challenges for catalysts. To name just one ...

  • Wet gas sulfuric acid - profitable sulfur management

    The WSA technology is an excellent alternative to the Claus technology for sulfur management within oil refining, coal gasification, gas sweetening etc. High steam production, feed flexibility, ease of operation, and low CAPEX & OPEX are some key benefits for the operator when selecting the WSA technology. ...

  • Customized grading solutions for your feedstock

    Match your catalyst grading to your feedstock for minimum pressure drop build-up and maximum demetallization. As today’s opportunity crudes and heavier feedstocks become more economically viable, the oil fractions you refine are posing new challenges. Creating the optimal grading solution for your ...

  • Optimizing your plant performance

    Expert technical services in licensing, engineering, and catalysts for hydroprocessing, hydrogen, and sulfur management applications. Refinery processes are complex and filled with potential sources of inefficiency. Our technical services get to the root of the problem and improve the refinery profitability, ...

  • Topsoe refinery Research & Development

    Providing refiners with the best catalysts on the market would be impossible without the innovative ideas from Topsoe R&D. Combined with the knowledge obtained from our pilot plant units, catalyst development is essential to providing high-performing, customized solutions. Topsoe’s research ...

  • Topsoe stream management

    Ensuring optimal utilization of all hydroprocessing units, hydrogen and catalyst. Refiners often face bottlenecks and challenges at their different units. Many times, these are solved within the refinery itself, and only considering a single or maybe a few units. With Topsoe Stream Management the feed ...

  • Haldor Topsoe refinery walk-through

    Exploring the hidden potential of your refinery. Refinery processes are complex and filled with potential sources of inefficiency. A Topsoe Refinery Walk-Through will identify the hidden opportunities and help you improve the refinery profitability, flexibility, safety, and reliability. Within the ...

  • When reliable operation and easy inspection is key

    Topsoe’s outlet collector is easy to install and inspect and help ensure even flow distribution in the bottom of the reactor. It is important to have the best catalyst to ensure optimal performance of your hydroprocessing unit. However, it is equally important to have the best reactor internals ...

  • Higher activity, larger volume swell - the answer is HyBRIM™

    Topsoe’s new superior TK-611 HyBRIM™ catalyst for high-pressure ultra-low sulfur diesel and hydrocracker pretreatment services. Now, more than ever, refiners are forced to search for the absolute top tier NiMo catalyst for their ULSD or hydrocracking pretreat reactors. Despite tremendous ...