logo

Back

Number: 50

Display:

  • Advanced process control for Prime-G+™

    The benchmark technology for ultra low sulfur FCC gasoline. Deep HDS of cracked gasoline in one sweet little process. Deep hydrodesulfurization (HDS) of FCC gasoline (the largest sulfur contributor in the gasoline pool) is required to reduce gasoline pool sulfur content. Technologies must meet the following challenges: • Good octane retention • Excellent gasoline yield retention • No RVP increase • Minimum hydrogen consumption • Operational reliability • ...

  • Avoid unnecessary costs by understanding process problems before taking action

    When a piece of process equipment starts experiencing problems and producing off-spec product, every engineer’s reaction is to make a change to “fix” the problem and get it back on-spec. yet, many plants lack adequate instrumentation to completely diagnose the cause of the poor performance. Without a more complete understanding of the root cause of the problem, “corrective action” could have little effect or make the problem worse. Gathering supplemental ...

  • Clora 2XP: Sub-ppm chlorine analysis

    Clora® 2XP is designed for use with liquid hydrocarbons such as aromatics, distillates, heavy fuels and crude oils, as well as aqueous solutions. The enhanced precision of Clora 2XP is ideal for testing related to catalyst poisoning in reformers or for sites with fluid catalytic crackers and hydrocrackers monitoring very low levels of chlorine.

  • Clora Online: Continuous chlorine analysis in process streams

    Chlorine contributes significantly to the corrosion of plant equipment and must be treated accordingly. With ever-changing crude quality and potential for process upsets, chlorine levels can shift quickly, making real-time analytical results invaluable. Powered by MWDXRF®, Clora® Online uses ASTM D7536 technology and delivers real-time, continuous analysis of total chlorine from 0.2 ppmw up to 3000 ppmw. By monitoring desalted crude, a plant can optimize performance and ...

  • Clora: Monitor chlorine in liquid hydrocarbons

    Clora® is a compact analyzer to measure total chlorine in liquid hydrocarbons such as aromatics, distillates, heavy fuels, crude oils, and aqueous solutions. Clora delivers unprecedented accuracy and precision for petroleum and petrochemical applications where ease-of-use, reliability and measurement speed are critical.

  • Continuous level - Non-contacting measurement

    Non-contacting measurement technology by Berthold. The level measurement technology by Berthold is used in a variety of industrial sectors – ranging from the chemical to the waste water industry. It is suitable for measuring ranges of just a few millimetres up to several metres. Applications are particularly successful when facing extreme measurement conditions: - Extreme temperatures - High pressure - Excessive foam formation - Dust Acid or abrasive media Our level ...

  • Crude oil contaminants: chlorine and the desalting process

    Crude oil contains many contaminants which present challenges to refiners. Some contaminants occur naturally in the crude oil and others are accumulated in the upstream process. The primary means to remove these contaminants is the desalting process.

  • Density, concentration and solids content

    Non-contacting measurement technology made by Berthold. Berthold density measurement systems are used for the continuous process control on pipelines and in vessels. Density, concentration and solids content are determined in a non-contacting manner, without affecting the flow properties of the measured material. Successful applications can be found in a wide range of industries and in particular when facing extreme measurement conditions: - Extreme temperatures - High pressure - ...

  • Digitalization manifesto - Now its time

    At KBC we believe in a world where plants operate with: No safety incidents, No unplanned outages, Rigorous adherence to operating plans, Agile response to market changes and plant disturbances, A motivated and informed workforce, A culture of profitability. We call this ‘Excellence’. KBC exists to help its customers in the Energy and Chemical industry realize value through achieving excellence. Digitalization is one of the key strategies a plant can adopt in pursuit ...

  • Exchanger leak testing - chemical tracers

    Tracerco has been at the forefront of the development of online leak detection for the last 40 years. The method allows the detection of leaks as small as 0.5%. However, customer demands to measure smaller leaks affecting product quality, has prompted extensive research to develop alternative online methods. Through the development of specialist chemical tracers leaks as small as 0.0001% are readily identified. Project Field Test In the following case study, Exchangers A and ...

  • Fuels analysis made simple

    Analyzing finished fuels and feedstocks is a complicated process traditionally involving multiple analytical techniques, expensive dyes; multiple columns, valves, and traps; messy solvents; complicated hardware; and lots of analysis time. In order to obtain meaningful results, all of these components must work in perfect harmony, and often it requires prior knowledge of the samples being analyzed with precious time wasted on reanalysis. The VUV Analyzer for Fuels—the ...

  • How much time can you save by switching to Sindie 2622 Gen3?

    Sindie 2622 is renowned for its precision, accuracy, and ease of use. However, one drawback to the ASTM D2622method is the requirement for duplicate determinations of samples ≤100 ppm. This equates to 20 minutes of measurement time on the traditional Sindie 2622 Gen2 [(300s background + 300s sulfur) * 2determinations = 1,200s 20 minutes total time per sample]. Sindie 2622 Gen 3 now offers a time saving solution to this problem, withthe option to reduce the back ground measurement ...

  • indie 2622: 2622 & 7039 sulfur analysis as low as 0.15 ppm

    Sindie® 2622 Gen 3 complies with ASTM D2622, D7039 and ISO 20884 methods, enabling complete flexibility in sulfur analysis. With no compromises in detection, performance and reliability, Sindie 2622 is the ideal sulfur analytical solution from ultra-low sulfur diesel and gasoline to heavy fuel oil and crudes.

  • InFocus™ Unit Monitoring Tool facilitates collaboration with ExxonMobil experts

    Challenge: Effective communication and collaboration between companies. Communication between a cumene customer and ExxonMobil Technical Support was challenging due to language and location barriers. Feed treaters which should be regenerated at least once a week were only regenerated once every couple of months. This reduction in regeneration frequency led to faster deactivation of the alkylation catalyst with a potential 20% reduction in cycle length. Solution: InFocus™ ...

  • Interface and Multiphase Level Measurement

    Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different product layers inside the vessel. In this way the characteristic of the emulsion layer can be monitored as well. The measurements are primarily applied in chemical plants and in the oil & ...

  • Interface measurement in desalters

    Interface measurements in desalters are often regarded as not being very critical, even though every drop of oil, to be refined, passes through the desalter. As refineries try to maximize their margins, so-called opportunity crudes are often used. These crude oils generally contain increased levels of sulphur, oil sands, bitumen, heavy oils and oils with high TAN. This can lead to problems with the proper operation of the desalter. In addition, refineries are increasingly confronted ...

  • Level Switch - Mini-Switch LB 471

    Application. The BERTHOLD level switch is used in all branches of industry, including the food industry. This measurement system is applicable where one or more alarm levels of liquids or bulk solids have to be monitored. In fact, the BERTHOLD level switch is suitable for installation on all types of vessels or bunkers like storage tanks, hot-storage bunkers, vessels with agitators, high-pressure reactors, cyclones or feeder chutes. The Function. The operation of the measuring ...

  • Making desalter vessels transparent to optimise crude processing

    Making Desalter Vessels Transparent to Optimise Crude Processing... whatever the blend. To improve margins, refiners continuously look to optimise feedstock blends. Variability can bring significant operational challenges during the refining process that must be overcome. One critical need is the efficient removal of solids, salts and water from crude feedstock. This has become increasingly difficult when processing certain opportunity crudes that can have all of these detrimental ...

  • Making the invisible visible

    In FCC Units (Fluidised Catalyst Cracking Units) the atmospheric residue from the distillation is cracked to LPG, naptha and other components. This sometimes leads to “invisible” deposits inside the Riser. This article features Tracerco’s ThruVision™ scans to illustrate how the technology helped the refinery to identify these deposits at an early stage. Bayernoil operates two FCC Units to convert heavy hydrocarbons. In the FCC Unit the feed is injected ...

  • Measurement instruments and servicing

    Our Measurement Instruments business designs and manufactures a range of bespoke, low maintenance, high reliability instruments providing operators with real time measurements and in-situ visualisation. Our experienced team technically supports an extensive range of nucleonic measurement instruments for phase, density, bulk level and interface measurement and pipe slugging characterisation. All of our nucleonic instruments are custom designed to the needs of the specific application, ...

  • Measurement solutions for the refining industry

    Optimize your production throughput with increased safety and reliability. Berthold Technologies radiometric instruments for non contacting level and density measurement are widely used in the global oil refining industry. Among our customers are well-known companies like Exxon Mobil, Sinopec, Shell, BP, Conoco Phillips, Lukoil, Total – just to name a few. With our measuring solutions based on gamma absorption we help our customers to reliably control their processes ...

  • MINISCAN IR LOG

    LOGical Solution for Condition Monitoring of Lubricants, Oils and Greases. The MINISCAN IR LOG is a highly versatile and extremely fast FTIR analyzer, designed for on-site condition monitoring of oils and greases. It is also capable of measuring low or high levels of water in oil accurately and quickly, without using hazardous reagents. KEY BENEFITS • Cost Saving A condition monitoring apparatus is a hard-dollar saving investment, if the analyzer allows to check lube ...

  • MINISCAN IR VISION - top performer in portable fuel analysis

    The MINISCAN IR VISION is a high speed, compact and robust FTIR fuel analyzer for the comprehensive and automatic measurement of gasoline, jet and diesel fuels. The analyzer is configured to measure more than 100 fuel parameters and components for fuel blending, for quality inspection and to check compliance with fuel specifications directly at the point of sale. • 100+ preconfigured parameters Compound analysis is performed according to the international standards ASTM ...

  • Phoebe: Total phosphorus analysis as low as 0.4 ppm

    From crude oil to bio-fuels, in additives or water, Phoebe® delivers unprecedented precision and accuracy for quantification of phosphorus. Phoebe delivers a LOD of 0.4 ppm in hydrocarbon matrices in a ten-minute measurement cycle.

  • PI System™: The inside secret of IOT in Oil & Gas

    OSIsoft’s PI System gives Oil & Gas engineers real-time insight into operations to reduce cost, improve safety and reliability, and enable data-based decisions for long-term strategic success.The PI System captures data from sensors, meters, SCADA, DCS, and other devices and transforms it into rich, real-time insights that Oil & Gas engineers, executives, and partners can use to reduce costs, dramatically improve overall productivity, and create new connected services ...

  • Plant control - advanced burner control (plus)

    Applications: The design intent is to have accurate SRU tail gas quality control in order to optimize sulphur recovery. ABC provides that. It is clearly superior over conventional SRU control and has always been Comprimo’s control system of choice for the EUROCLAUS®/SUPERCLAUS® process with over 200 licenses worldwide.   ABC handles changes to SRU feed gas variables such as flow rate, pressure, temperature and composition, provided these changes are relatively ...

  • Profiler™ TGA

    The Profiler™ TGA provides extremely reliable liquid level and interface measurements for alkylation units and other harsh service environments. The Profiler™ TGA is specifically designed to measure the vertical distribution of multiple interfaces in real time and at high resolution. Key features • Extremely reliable • Low maintenance Benefits • Reduces possibility of acid runaway • Increases production throughput • Optimises acid ...

  • S, Ni, V, and Fe analysis of crude oil using HDXRF®

    Test methods for measuring sulfur content, like ASTM D4294 and ISO 8754, have become critical for assessing the value of crude oil. The blending of crude oils from different sources has become more commonplace within the industry to meet specifications for the classification of sweet crude oil. The introduction of new crudes brings new challenges, like higher concentrations of metals such as nickel (Ni), vanadium (V), and iron (Fe).

  • SERVOFLEX Micro i.s. 5100

    Intrinsically safe analyzer measuring O2, CO or CO2. High performance oxygen designed for the measurement of toxic and flammable gas samples, the intrinsically safe Micro i.s 5100 is a unique analyzer certified to Zone 0 and Zone 1, and suitable for measuring percent levels of O2, CO or CO2.   Applications include hazard area combustion optimisation, refineries, process monitoring and inerting.

  • SERVOFLEX Mini HD

    Rugged and durable oxygen, carbon monoxide and carbon dioxide portable analyzer designed for field and light industrial use. The MiniHD 5200 is an ultra-sensitive analyzer designed for O2, CO and CO2 monitoring in common gas mixtures. With a rugged and durable design, the MiniHD is optimized for use in both the field and also light industrial applications. In addition to its leading-edge analytical capability, the MiniHD delivers a feature-rich suite of added benefits including ...

  • SERVOMEX OxyDetect

    Non-depleting Paramagnetic oxygen monitor designed for hazardous area environments. The Servomex OxyDetect is a life safety monitor designed for safe area or hazardous area environments without the sensor deterioration that affects traditional electrochemical sensors.      Designed for use in life critical applications, the OxyDetect utilizes the Hummingbird Paracube® Micro Paramagnetic sensor, whose industry-leading levels of linearity, accuracy and ...

  • Servomex product guide

    Our industry-leading gas analyser range and systems, matched to your industry requirements. Developed and manufactured in our UK and Americas Technical Centers, Servomex analyzers are hand-built to precise requirements. This ensures every product we make provides performance optimized to the needs of each customer process. Built around the stable, accurate and reliable gas measurements provided by our world-leading Hummingbird sensing technologies, our analyzers incorporate ...

  • SERVOPRO 4900 Multigas

    High-specification digital continuous emissions (CEMS) analyzer, designed for multi-gas measurement of criterion pollutants, greenhouse gases and reference oxygen. The advanced SERVOPRO 4900 Multigas delivers high-performance multi-gas monitoring designed specifically for the continuous emissions monitoring of flue gas. This sensitive analyzer uses a combination of Servomex’s leading-edge, patented, digital sensing technologies, including Paramagnetic O2, and the non-dispersive ...

  • SERVOTOUGH FlueGasExact 2700

    High performance combustion process analysis of oxygen and combustibles, designed for use in the most hazardous and challenging location. Armed with an integral sampling system custom-designed for operation in some of the hottest and most extreme combustion environments, the FluegasExact is the analyzer of choice for measuring oxygen and combustibles in the most demanding hydrocarbon processing and power generation applications.

  • SERVOTOUGH H2scan

    Explosion-proof in-line hydrogen process analyzer, using a solid-state, non-consumable sensor configured to operate in process gas streams. The H2Scan hydrogen process analyzer features thin film technology that provides a direct hydrogen measurement that is not cross-sensitive to other gases. The H2Scan is ideal for applications where real-time, hydrogen specific measurements can enhance process efficiencies, diagnostics and maintenance management. ·  &nbs ...

  • SERVOTOUGH Oxy 1900

    Leading-edge, safety-enhanced oxygen analysis for hazardous or challenging applications. The award-winning Oxy 1900 sets the standard for O2 gas analysis, delivering a feature-rich solution designed to meet the monitoring needs of even the most challenging applications. At the heart of the Oxy 1900 is Servomex’s patent Paramagnetic oxygen sensor. Providing highly reliable, accurate and stable percentage measurements of oxygen. The non-depleting technology requires minimal ...

  • SERVOTOUGH OxyExact 2200

    High specification process oxygen analyzer, designed for ultimate monitoring performance. The OxyExact safe area oxygen analyzer combines high precision Paramagnetic O2 sensing technology into a flexible and robust safety-enhanced design, optimized to meet the needs of demanding process monitoring applications like feedstock purity testing and clean up, hydrogen and chlorine production, solvent recovery and sewage and sludge driers.

  • SERVOTOUGH SpectraExact 2500

    Rugged photometric multigas gas analyzer designed for demanding process applications. Designed to provide a highly flexible analytical solution adaptable to many applications, the SpectraExact (2500) range delivers a winning combination of proven performance and flexible operation in a resilient and reliable design.

  • SERVOTOUGH SpectraScan 2400

    Tunable filter infrared absorption on-line gas analysis platform ideal for the measurement of light hydrocarbons. The SERVOTOUGH SpectraScan is a real-time Tunable Filter Infrared analyzer capable 
of accurately separating light hydrocarbon components. Using a unique wavelength scanning tunable filter spectrometer, fast update rates are performed for C1 through C6 analysis. Sampling is a continuous flow-through type, suitable for on-line, unattended operation, while the analyzer ...

  • Signal: Total silicon analysis as low as 0.65 ppm

    From gasoline to ethanol and toluene, Signal® delivers total silicon analysis. Powered by MWDXRF®, Signal is a robust analysis solution for demanding petroleum and industrial environments.

  • Driving machine learning through fundamental machinery diagnostics

    Join Honeywell’s APM specialist, Ben Berwick, as he discusses how Honeywell leverages Asset Performance Management technology to recognize the earliest onset of rotating machinery issues.   The rapid pace of predictive analytics, artificial intelligence and digital twins for industrial assets is proving revolutionary in how asset intensive organizations benefit from the actionable information provided by asset performance management (APM) software.  A key element ...

  • Digital Reliability: 24/7 Real-time Machinery Diagnostics

    Dynamics SPC discusses our turnkey solution we call COMPACS. COMPACS monitors the health of your equipment in real-time. We’ve spent close to three decades developing the system and technology. You will learn that what differentiates our solution from all others on the market is it employs a patented artificial intelligence allowing you to diagnose equipment defects several minutes, hours, even days prior to equipment failures.   We will provide examples of how COMPACS ...

  • Simplify crude assay importing in UniSim design by utilizing H/CAMS

    Haverly H/CAMS is the industry leading assay crude management software with over 2000 assays. Honeywell's UniSim Design software links to Haverly H/CAMS via a COM interface and allows you to import proprietary assays with just a few clicks. This functionality increases engineering effectiveness, eliminates the need for manual data entry, and makes it easier to model crude storage facilities and refining processes. Presenters: Jagdish Rachh - Honeywell David Alexander - Haverly Moderator: Ken ...

  • Intelligently predict and prevent corrosion across your operations

    Learn how the fight against corrosion never stops - it is a fact of life every day across Oil & Gas, Refining and Pipeline operations, what-if you could have insight into real-time corrosion rates in your process?  Honeywell Predict® Corrosion Suite provides the next generation of corrosion management solutions, intelligent software providing real time corrosion quantification. Unlike conventional corrosion management methods, unique prediction models are employed ...

  • Responsive image Advanced sulphur analysis in hydrocarbons
  • Responsive image Designing deepcut vacuum units that work
  • Responsive image Galexia™ hydroprocessing platform
  • Responsive image FCC catalysts & additives
  • Responsive image Get the right answer faster
  • Responsive image Capture more value from every barrel
  • Responsive image Extensive tray portfolio
  • Responsive image BASF Refinery Solutions on LinkedIn
  • Responsive image Download Tracerco level system data sheet
  • Responsive image Axens on Linkedin