logo

Back

Number: 419

Display:

  • SUPERFRAC® XT High Performance Trays

    The SUPERFRAC® tray family has been proven through more than 25 years of application in the most demanding fractionation, absorption, and stripping applications. Through sustained investment in research and development, Koch‐Glitsch continues to improve the performance of the SUPERFRAC tray to meet the future requirements of its customers.   Koch‐Glitsch’s most recent development is the SUPERFRAC® XT tray, which applies our combined hydraulic, separation, ...

  • Equipment design matters

    Many attractive projects fail to meet expectations at startup. Disappointing performance often results from bad simulation practices and/or poor equipment design rather than faulty execution. Refineries are currently considering FCC revamps to increase olefins for more alky unit feed, maximize LCO product recovery, and minimize slurry product by producing HCO for hydrocracker feed. These changes raise fractionator operating temperature. Higher temperatures require better process ...

  • Tracerco Diagnostics™

    Providing real time measurement technologies to assist with critical decision making. Tracerco Scanning Services TRU-SCAN® Application. Do you have problems with the operation of your stripper/absorber or fractionation tower? Is this limiting production? Do you want to reduce your operating costs? Do you want to reduce your shutdown time? Tracerco’s Tru-Scan™ technology, utilizing FrothView™, is used to evaluate the mechanical integrity and hydraulic performance ...

  • Channel baffles: improving efficiency on trays with low vapor loading

    Sour water strippers, wastewater benzene strippers, or any other column that operates with low vapor rates often have active areas that are easily oversized for the actual operating vapor traffic. For optimum tray efficiency, good contacting of the liquid flowing across the tray deck with the vapor flowing up through the tray orifices is critical. Channel baffles are a very straight-forward design modification that improve vapor/liquid contact, increasing tray efficiency in low ...

  • Advanced process control for Prime-G+™

    The benchmark technology for ultra low sulfur FCC gasoline. Deep HDS of cracked gasoline in one sweet little process. Deep hydrodesulfurization (HDS) of FCC gasoline (the largest sulfur contributor in the gasoline pool) is required to reduce gasoline pool sulfur content. Technologies must meet the following challenges: • Good octane retention • Excellent gasoline yield retention • No RVP increase • Minimum hydrogen consumption • Operational reliability • ...

  • DigitalRefining 2020 Media Details

    WEBINARS Our Webinars are 45 minutes long (recorded), followed by a 15-minute live Q&A, and can be delivered in three different time zones at no extra cost. Webinars are promoted via eblasts, DigitalRefining’s homepage, our weekly newsletter, as well as through print and online advertisements, LinkedIn and Twitter. On-demand versions are included on DigitalRefining.com and promoted for 12 months, providing a constant flow of qualified leads. www.digitalrefining.com/literature.html EBLASTS DigitalRefining’s ...

  • Cat Tech Dense Loading

    For over 40 years Cat Tech has led the way in catalyst handling through innovation and experience. Our Trained professionals are focused on safety and excellence delivering the best results for your project. With ever increasing performance standards the precise and controlled dense loading of catalyst is a critical component of effective unit performance. Cat Tech’s proprietary JE Dense Loading system is designed to deliver greater control and lower attrition during the ...

  • MECS® Excalibur™ auto lancing systems

    Thee MECS® auto lance system was developed to automatically lance new sulphuric acid re tube boilers while they're in service, cleaning fire tube boilers as efficiently as manual lancing. The MECS® Excalibur™ sequentially cleans all re tubes by opening the shutter tube. Thee automated lance shuts the corresponding re tube. Next, a massive compressed air burst is delivered within the fire tube and the fouling residue is effectively removed and the tube is clean. For ...

  • MECS® Sulfox™ process

    The SULFOX™ process is based on the thermal and catalytic conversion of sulphur-bearing compounds into sulphuric acid. Depending on the feed gas conditions, customised plant types are offered. For low concentrations, the feed gas is preheated to the required catalyst inlet temperature by the glass tube heat exchanger of the condensation column and an additional gas preheater from the heat recovery system. An additional direct fired preheater is used for start-up and very ...

  • Making desalter vessels transparent to optimise crude processing

    Making Desalter Vessels Transparent to Optimise Crude Processing... whatever the blend. To improve margins, refiners continuously look to optimise feedstock blends. Variability can bring significant operational challenges during the refining process that must be overcome. One critical need is the efficient removal of solids, salts and water from crude feedstock. This has become increasingly difficult when processing certain opportunity crudes that can have all of these detrimental ...

  • Maximize the value of your naphtha feedstocks and downstream processes

    New solutions for changing needs Lighten the burden of heavy feedstocks with Topsoe catalysts, process designs and technologies. If your refinery is like most, you’re under pressure to squeeze more value out of heavier feedstocks, and this presents new challenges for catalysts. To name just one example, increasing use of coker feedstocks has led to higher silica and nitrogen levels in the naphtha streams, requiring catalysts with superior HDN activity and greater surface ...

  • Eliminate heat exchanger fouling with Watlow’s HELIMAX technology

    Fluctuations within the heat exchanger to either the operating temperature or the mass flow rate are common causes of coking, which can lead to system failures and expensive downtime. Some heat exchanger design methods, like segmental baffles, have known dead zones where hot spots can occur, accelerating the coking process. Watlow’s HELIMAX ultra-efficient heat exchanger was designed to eliminate temperature-related failures. Leveraging our proven, patent-pending continuous ...

  • Liquid-liquid separation technology

    In industrial process equipments liquid-liquid mixtures are produced by essentially two different mechanisms. a) Mixing of the phases in either purpose built equipment, mechanical mixers, static mixers where pressure energy is applied to increase the surface free energy of the fluids to produce droplets, or in shear flow of the fluid mixture in pipes. b) The cooling of a saturated liquid below the solution point so that the solute phase condenses out of solution resulting in ...

  • SERVOFLEX Micro i.s. 5100

    Intrinsically safe analyzer measuring O2, CO or CO2. High performance oxygen designed for the measurement of toxic and flammable gas samples, the intrinsically safe Micro i.s 5100 is a unique analyzer certified to Zone 0 and Zone 1, and suitable for measuring percent levels of O2, CO or CO2.   Applications include hazard area combustion optimisation, refineries, process monitoring and inerting.

  • Tracerco Profiler™ HMI

    A Windows based application offering dynamic displays, diagnostics, trending, control and historical logging. The Profiler™HMI, is a ready-made graphical user interface that provides clear insight into your separation process while enabling efficient operation and control of the Profiler™GPS and the Profiler™TGA. The displays available from the Profiler™HMI provide a ‘window’ into the vessel, allowing operators to visualize the process density ...

  • Trust BASF’s commitment to technical services

    BASF’s commitment to innovation is in tune with the everchanging market and needs of our customer base. Our product and service model allows our technical representatives to build close relationships at their customers’ sites to deliver timely, proactive solutions and services. This intimate knowledge of our customer base allows BASF to target and allocate its R&D efforts in developing unique products that deliver immediate value to the market. Products and services ...

  • Trays for any application

    Sulzer Chemtech offers the largest tray portfolio on the market. Whatever the requirements, we have the right tray! Continuous innovations and improvements are: • First movable valve • First fixed valve • First customer tray design program • Use of push valves on commercial trays • Alliance with Shell Global Solutions to widen our tray Portfolio • Incorporation of fixed valves on multi downcomer Trays • Development of VGPlus • Highest capacity ...

  • Tray designs for extreme fouling applications

    Today refiners experience a lot of problems with processing of opportunity or heavy crudes. Such crudes have very high sulfur content and require the addition of amine scavengers before desalting. These amines decompose in the heater and create ammonium chlorides in the presence of water in the top of the crude tower. Dissolved salts start to precipitate and crystallize when the solution becomes saturated and water is vaporized. Such fouling starts to grow below and above trays ...

  • Sindie Online: Continuous sulfur analysis in hydrocarbon process streams

    Sindie® Online is an industrial grade process sulfur analyzer with breakthrough detection capability to monitor ultra-low sulfur in petroleum or aqueous process streams. This process analyzer presents the ultimate solution for refineries and pipeline terminals where measurement speed and reliability are essential. Powered by MWDXRF®, Sindie Online uses ASTM D7039 technology and delivers real-time, continuous analysis of total sulfur from 0.5 ppmw up to 3000 ppmw. This ...

  • Customized grading solutions for your feedstock

    Match your catalyst grading to your feedstock for minimum pressure drop build-up and maximum demetallization. As today’s opportunity crudes and heavier feedstocks become more economically viable, the oil fractions you refine are posing new challenges. Creating the optimal grading solution for your individual feedstock is essential to minimize pressure drop build-up, increase metals pick-up, and reduce downtime and catalyst replacement. An overlooked advantage The importance ...

  • Solutions for a cleaner, safer tomorrow

    Through its science-based Clean Technologies portfolio, DuPont offers focused solutions based on real-world experience. The company has dedicated itself to improvements in the areas of clean air and clean fuel, and this has led the company to seek out like-minded industry partners and complementary technologies. From the reduction of sulfur oxides (SOx), nitrogen oxides (NOx) and particulate emissions to technologies that support the production of clean fuels, DuPont resources ...

  • Flow-pressure of lubricating grease according to DIN51805 kesternich

    Flow-properties of lubrication grease at low temperatures are a measure of great significance for central lubrication systems of vehicles and machineries. This property can best be measured according to the method of Kesternich (DIN 5108). The original manual and time-consuming method is now fully automated in MINITEST FFK, an instrument for the determination of the flow pressure of lubricating grease at temperatures down to -60°C. Temperature control is performed with Peltier ...

  • Slash your hydrogen production costs

    By utilizing low value, excess fuel gas, you can reduce your consumption of costly traditional hydrogen plant feedstocks, such as natural gas, LPG, butane or naphtha. Upgrading fuel gas produced onsite is a proven way to significantly cut the cost of your hydrogen production. Refinery fuel gases are an attractive feedstock option. However, impure RFG feeds can cause problems in the feedstock purification section. With Haldor Topsoe’s fuel gas hydrotreating (FGH) technology, ...

  • SERVOMEX OxyDetect

    Non-depleting Paramagnetic oxygen monitor designed for hazardous area environments. The Servomex OxyDetect is a life safety monitor designed for safe area or hazardous area environments without the sensor deterioration that affects traditional electrochemical sensors.      Designed for use in life critical applications, the OxyDetect utilizes the Hummingbird Paracube® Micro Paramagnetic sensor, whose industry-leading levels of linearity, accuracy and ...

  • Profitable hydrocracking starts here.............

    For seven decades we've helped feedstock processors enhance profits with responsive and responsible refining and recovery of PGMs from spent processing catalysts. Profitable hydrocracking and hydrocarbon processing starts and ends with Sabin Metal worldwide.

  • Cat Tech Amonia Market

    For over 40 years Cat Tech has led the way in catalyst handling through innovation and experience. Our Trained professionals are focused on safety and excellence delivering the best results for your project. Cat Tech has more experience with all licensors, units and processes in the ammonia industry than any other contractor and can deliver success on any unit or process, including refits, revamps, partial unloads, cartridge replacements and inspection or repairs under inert conditions. > ...

  • Advanced rental flare technology

    Rental Services: The UOP Callidus Rental Group has the unique ability to bypass the normal work flow with our own project design and management team to fulfill all of our customer’s rental needs. If it’s not in our vast inventory of existing parts and equipment, we can create a unit or modify an existing unit in a short amount of time. If you have an unexpected or short term rental need or have some questions and just need some advice, let our experienced team help ...

  • PackView™ - quantitative analysis of packing mal-distribution

    The last issue of Tracerco Insight (Vol 6 Ed 1) featured our patent pending FrothView™ technology illustrating how using Tracerco’s new measurement detector technology and analysis of gamma scan data provides quantitative information about the useful capacity of trayed towers. In this article you will learn how applying this technology to packed towers can determine the % liquid fraction providing a measure of the maximum useful capacity of the packing. Enhanced ...

  • InFocus™ Online Lube Optimization Mode calculates impact of raising nitrogen feed on catalyst life

    Situation: A major North American base oil producer has 2 production units. One of the units consists of a Lubes Hydrotreater/Hydrocracker (HDT/HDC) and is integrated with a hydrodewaxing unit using ExxonMobil's proprietary MSDW™ dewaxing catalyst technology. The current production rate of this unit is 20 KBD. Challenge: The refiner wanted to understand the impact of running a higher nitrogen feed stock in order to identify the best strategy to minimize impact on the life ...

  • ReFRESH™ your Catalyst

    Topsoe´s ReFRESH™ technology offers you the opportunity to use Haldor Topsoe catalysts twice for maximum economic benefit by reactivation of the catalytically active sites. Activity up to 95+ % of fresh catalyst is restored. The technology is commercially proven with more than 65 references and applicable for spent BRIM® and HyBRIM™ catalysts. The ReFRESH™ technology is a specialized method of metal redistribution – available only from Topsoe ...

  • VORSOMAX® Cyclonic Equipment

    Reduce new vessel size or increase capacity in high-pressure applications with our new VORSOMAX® cyclone mist eliminator and VORSOMAX® cyclonic inlet device. The advanced design DEMISTER-PLUS mist eliminator can achieve even greater increases in capacity over conventional mist elimination equipment. The well-proven DEMISTER-PLUS mist eliminator design features a feed inlet device and a one- or two-stage mist eliminator, combining the efficiency of the DEMISTER® mist ...

  • COSWEET™ deep COS removal from natural gas

    By combining amine absorption with catalytic COS hydrolysis, COSWEET™ allows gas sweetening, either total (removal of both H₂S + CO₂) or selective (removal of H₂S mainly), with complete COS removal. The three steps of COSWEET™ process consists in: * Removing the bulk of the H₂S and CO₂ present in the feed gas by absorption in the bottom section of a solvent absorber. * Withdrawing the partially sweetened gas from bottom section of the absorber, water ...

  • High octane C₅/C₆ cuts via isomerization Processes

    C5/C6 isomerization is a must-have for refiners who want to maximize the profitability of their gasoline pool. This process can be adapted to various configurations and allows improving C5/C6 naphtha cut octane numbers up to 92 without constraints on olefins and sulfur. Axens is licensing a complete set of isomerization configurations in order to support refiners to resolve the evolving gasoline pool equation. COMMERCIAL EXPERIENCE With a powerful R&D support at both lab ...

  • How to evaluate, select, and work with a precious metals refiner.

    Precious metals are used in many processes and products for facilitating and/or speeding chemical reactions, pollution abatement, chemical/pharmaceutical production, electroplating, automotive catalytic reactors, jewelry, film, and hundreds more. Escalating values of most precious metals have forced users to view their precious metals purchasing and recovery management programs with a keen focus on costs at all levels. Selecting and working with an established, reliable — ...

  • Get the best from your compressor upgrade and revamp

    How’s your compressor running? How should it run? How could it run? The reliability, efficiency, and environmental soundness of compressors dictate the cost-effectiveness and dependability of entire plants. As a specialist in equipping reciprocating compressors with the latest performance-determining components, HOERBIGER has a unique role in upgrading existing compressors. During regular operations, every compressor must be continually improved in order to meet today’s ...

  • Cutting-edge catalysts for ethylbenzene production

    ExxonMobil’s zeolite catalysts are the heart of the Badger EBMax℠ process. Originally developed by Mobil Oil, the MCM-22 family of zeolite catalysts revolutionized the production of ethylbenzene (EB). With their high activity and selectivity to EB, ExxonMobil catalysts enable a simple, liquid phase process that dramatically lowers operating temperatures and thereby reduces equipment sizes and energy consumption – all while still improving the ethylbenzene product ...

  • Wet gas sulfuric acid - profitable sulfur management

    The WSA technology is an excellent alternative to the Claus technology for sulfur management within oil refining, coal gasification, gas sweetening etc. High steam production, feed flexibility, ease of operation, and low CAPEX & OPEX are some key benefits for the operator when selecting the WSA technology. Today we have +130 references world wide.

  • GT-BTX PluS® meeting the world’s clean gasoline needs

    As the worldwide refining industry becomes more intricately linked, the specifications for fuels are converging around certain common aspects. Chief among these are the environmental limits on benzene and sulfur content in motor gasoline. GTC Technology’s GT-BTX PluS provides an effective and economical solution for meeting both of these specifications, and gives refiners the ability to convert lower-value gasoline components into higher-value petrochemicals, thereby maximizing ...

  • Recovering platinum/rhenium from spent hydrocarbon processing catalysts

    Now, practical, cost-effective recovery of platinum/ rhenium reforming catalysts, regardless of solubility– with maximum returns. Platinum / rhenium catalysts are widely used in the processing of hydrocarbon products. As rhenium values have increased, recovery techniques from spent catalysts have not kept pace. However, most users look to their refiners for increased recovery yields. Finally, there is a practical, cost-effective breakthrough that addresses this issue: after ...

  • BELCO® clean air technologies

    Belco Technologies Corporation (BELCO®), part of DuPont’s Clean Technologies portfolio, is an industry leader in the supply of air pollution control systems to the oil refining, sulfur recovery, sulfuric acid, utility, chemical, pulp & paper, marine and other industries. Since 1969, BELCO® has designed and supplied air pollution control systems for clients all over the world. Headquartered in Parsippany, New Jersey (USA), BELCO® has been recognized by refiners ...

  • Driving machine learning through fundamental machinery diagnostics

    Join Honeywell’s APM specialist, Ben Berwick, as he discusses how Honeywell leverages Asset Performance Management technology to recognize the earliest onset of rotating machinery issues.   The rapid pace of predictive analytics, artificial intelligence and digital twins for industrial assets is proving revolutionary in how asset intensive organizations benefit from the actionable information provided by asset performance management (APM) software.  A key element ...

  • High-Performance Tail-Gas Treating

    Discover the benefits of applying the latest technology in modern, low-temperature Shell Claus offgas treating (SCOT™) units. See how next-generation, low-temperature SCOT catalysts can help extend cycle life, lower energy costs and ensure regulatory compliance, even with the most difficult feeds and conditions. In this webinar you will: • Learn why modern tail-gas treating units are being designed without an inline burner, and the impact this has on inlet temperatures ...

  • Digital Reliability: 24/7 Real-time Machinery Diagnostics

    Dynamics SPC discusses our turnkey solution we call COMPACS. COMPACS monitors the health of your equipment in real-time. We’ve spent close to three decades developing the system and technology. You will learn that what differentiates our solution from all others on the market is it employs a patented artificial intelligence allowing you to diagnose equipment defects several minutes, hours, even days prior to equipment failures.   We will provide examples of how COMPACS ...

  • Simplify crude assay importing in UniSim design by utilizing H/CAMS

    Haverly H/CAMS is the industry leading assay crude management software with over 2000 assays. Honeywell's UniSim Design software links to Haverly H/CAMS via a COM interface and allows you to import proprietary assays with just a few clicks. This functionality increases engineering effectiveness, eliminates the need for manual data entry, and makes it easier to model crude storage facilities and refining processes. Presenters: Jagdish Rachh - Honeywell David Alexander - Haverly Moderator: Ken ...

  • Intelligently predict and manage sour water corrosion in refinery applications

    One of the primary concerns in refinery operations, especially when processing sour crudes, is management and mitigation of NH4HS (Sour Water) corrosion in hydrocrackers, hydrotreaters, FCC and other unit circuits. Honeywell's Predict-SW software, a byproduct of more than 15 years of intense Joint Industry Project (JIP) research, provides an easy to use framework to quantify NH4HS corrosion as a function of key process parameters across the refinery value chain for commonly used ...

  • Understanding the financial impact of a collapsed flue gas tunnel in your SMR

    The overall influence of tunnels on the flue gas flow in a steam methane reformer has been modeled and documented, and the concept that running a reformer without tunnels can decrease overall efficiency is well understood in the industry. The study detailed in this webinar focuses on the effects of operating a reformer after removing just a single tunnel, leaving the rest in place. The resultant flue gas flow field is analyzed by looking at temperature profiles, residence time ...

  • Maximising naphtha through hydrocracking: Refinery of the future

    Globally the demand for petrochemicals is increasing at rates nearly 1.5 times GDP. In regions where there is a heavy investment in large-scale para-xylene capacity there is a significant demand for naphtha. However not all naphtha is suitable to produce aromatics. Heavy naphtha is required, but it is in limited supply.   This is where the Honeywell UOP UnicrackingTM process becomes the key enabler to petrochemical production. By installing one, or a combination of Unicracking ...

  • Intelligently predict and prevent corrosion across your operations

    Learn how the fight against corrosion never stops - it is a fact of life every day across Oil & Gas, Refining and Pipeline operations, what-if you could have insight into real-time corrosion rates in your process?  Honeywell Predict® Corrosion Suite provides the next generation of corrosion management solutions, intelligent software providing real time corrosion quantification. Unlike conventional corrosion management methods, unique prediction models are employed ...

  • From hydrogen production to sulphur recovery - let ceramics pave the way

    Learn how to boost the reliability and performance of your hydrogen production and sulphur recovery plants through the deployment of Blasch’s proven ceramic systems. Benefits include: • Higher plant reliability and much longer run-lengths • 60 -90% faster installation times • Capacity increase • Annual energy savings of several hundred thousand dollars for SRUs • Lower emissions   Flue gas tunnels in Steam Methane Reformers warp and fail causing non ...

  • Responsive image Advanced sulphur analysis in hydrocarbons
  • Responsive image BASF Refinery Solutions on LinkedIn
  • Responsive image Extensive tray portfolio
  • Responsive image FCC catalysts & additives
  • Responsive image Capture more value from every barrel
  • Responsive image Download Tracerco level system data sheet
  • Responsive image Galexia™ hydroprocessing platform
  • Responsive image Get the right answer faster
  • Responsive image Axens on Linkedin
  • Responsive image Designing deepcut vacuum units that work