You are currently viewing: Digital Magazines


Number: 63 Page:  «  1 [2] 3 4 5 6 »
Display: 
  • Processing Shale Feedstocks 2016

    Processing Shale Feedstocks 2016

    01-03-2016

    Guarding against contaminants --- Increasing FCC propylene yield --- Kinetic engine drives catalyst development --- Revamping for ULSD production --- Look beyond the catalyst --- Calcium containing feedstock processing

  • Catalysis 2016

    Catalysis 2016

    01-03-2016

    2016 Catalysis Q&A --- Guarding against contaminants --- Increasing FCC propylene yield --- Kinetic engine drives catalyst development --- Revamping for ULSD production --- Look beyond the catalyst --- Calcium containing feedstock processing


  • Q1 2016

    Q1 2016

    01-01-2016

    The outlook for transport fuels: Part 1 ... Tube rupture in a natural gas heater ... Improving heat transfer in reboilers and condensers ... The challenges of crude blending ... Monitoring and simulation resolves overhead corrosion ... Mitigating iron foulants in refinery processes ... Removing contaminants from crude oil ... Integrating wastewater reuse with seawater desalination ... Dealing with column fouling ... Designing a divided wall column ... A refinery’s journey to energy efficiency ... Energy savings in a coker’s water system ... Energy conservation in a crude unit ... The impact of tower internals on column performance ...

  • Revamps 2015

    Revamps 2015

    01-10-2015

    FCC profitability assessment via advanced modelling ... On-stream refractory measurement ... Energy efficiency in capital projects ... Low cost revamp to process heavy sour crudes ... Laser scanning for revamps ... Heat exchanger network retrofit for energy savings......

  • Q4 2015

    Q4 2015

    01-10-2015

    Analytics to identify FCC trends ... Minimising gasoline specification give-away ... Risk analysis of wired vs wireless communication ... Enhanced heat transfer for improved throughput and energy consumption ... Corrosion and fouling control in process equipment ... Treatment programme overcomes high TAN problems ... Corrosion and fouling: challenges and solutions ... Fired capital equipment: key plant components ... Overcoming clean fuels challenges ... Reducing capital cost risk ... Dealing with depleting sour gas reserves: Part 2 ... Optimising natural gas value ... Foaming in fractionation columns ... How ZSM-5 works on FCC gasoline composition ... Performance testing of naphtha reforming catalysts ... Integration of planning processes......

  • Q3 2015

    Q3 2015

    01-07-2015

    Managing fouling in refinery networks ... Dealing with depleting sour gas reserves:  Part 1 ... Revamping a hydrocracker's overhead condenser ... Optimising preflash for light tight oil processing ... Splitting distributed control for a refinery expansion ... Cyber security in the refining world ... Countering marine corrosion in instrumentation tube ... Energy savings from electric capacity control ... Revamp of a reciprocating compressor unit ... Advanced turbomachinery controls improve ethylene plant yield ... Mixing in large crude tanks ... Improved feedstocks for ethane crackers ... Controlling the dew point of natural gas ... Testing and experience in FCC catalyst selection ... Implementing real time optimisation technology

  • Q2 2015

    Q2 2015

    01-04-2015

    Revamping crude and vacuum units to process bitumen ... Tube alloy degradation in a steam cracking furnace ... Overcoming the effects of ammonia in heat exchangers ... Enhancing energy efficiency in the CDU ... Improving energy efficiency in furnaces ... Heat recovery from corrosive flue gas ... Optimisation of energy consumption ... Best practice in energy efficiency ... Advanced process control in FCC and hydrocracking units ... Increasing distillate production at least capital cost ... Advances in processing high naphthenic acid crudes ... Seven rules of sedimentation in hydrocracking ... Catalytic strategies to meet gasoline sulphur limits ... Reducing vacuum tower pressure ... Achema 2015 Feature