You are currently viewing: News



05-07-2017

Emerson launches Rosemount™ CT580 Quantum Cascade Laser analyser

To establish purity and optimise process control in industrial processing applications such as ethylene, natural gas and hydrogen manufacturing, Emerson Automation Solutions today announced the Rosemount™ CT5800 continuous gas analyser. The CT5800 is the first Quantum Cascade Laser (QCL) analyser designed for industrial process applications requiring Class I, Division 2 hazardous area certification built within a flameproof enclosure.
 
The CT5800 analyser’s unique cell design enables high-accuracy measurement of concentrations of impurities down to low ppm levels in the gas streams with exceptional linearity of response and repeatability, and incorporates up to six laser modules housed inside the same enclosure. The CT5800 analyser can measure up to 12 components simultaneously, greatly reducing the need for multiple analysers. In addition, the CT5800 has no consumables and calibration is seldom required, keeping cost of operation low.
 
Like all analysers in the CT5000 family, the CT5800 combines tunable diode laser (TDL) and quantum cascade laser technologies within the same analyser. The system uses a patented ‘laser chirp’ to provide near-instant high-resolution spectroscopy to detect and identify a range of molecules in both the near- and mid-infrared range of spectroscopic light with an enhanced dynamic range from sub ppm to percent levels.
 
“In ethylene manufacturing and natural gas processing for example, establishing the purity of the gas is essential to meeting contractual requirements as well as maintaining process optimisation and safety. Operators need to perform this analysis as accurately as possible – without wasting time or money,” said Amanda Gogates, product manager for Rosemount Quantum Cascade Laser Analyzers, Emerson Automation Solutions. “The CT5800 provides increased levels of measurement accuracy while allowing multiple components to be analysed simultaneously. Fast analysis time, as low as five seconds in some applications, ensures timely delivery of critical information for process monitoring and control. At the same time, the hazardous certification assures the analyser can be used in even the harshest and most threatening environments.”
 
The CT5800 meets hazardous certifications ATEX II 2G Ex d IIB+H2 T4 for Europe, and Class I, Division 2, groups B, C, D T4 for North America.

Sponsor : 

Other News Items

OpenTAS certified for EMCS 2.3

Implico’s OpenTAS terminal management system has now been certified for use with the new EMCS Release 2.3 which becomes mandatory from November 2018. The software ...

25-04-2018

Buckeye Partners, Phillips 66 and Andeavor to construct South Texas gateway terminal

Buckeye Partners, today announced the formation of a joint venture with Phillips 66 Partners and Andeavor to develop a new deep-water, open access marine terminal in ...

24-04-2018

KROHNE at ACHEMA: Innovations in industrial process measurement

At ACHEMA 2018, KROHNE will be presenting innovations for the process industries. Visitors are welcome on booth A13 in hall 11.1 to learn about current and future developments ...

23-04-2018

Kaspersky Lab identifies infrastructure of Crouching Yeti

Kaspersky Lab has uncovered infrastructure used by the well-known Russian-speaking APT group Crouching Yeti, also known as Energetic Bear, which includes compromised ...

23-04-2018

McDermott and CB&I announce global name and brands for combined company

McDermott International, Inc.  and CB&I today announced that, following the closing of the combination, the combined company intends to retain the name McDermott. ...

23-04-2018

Hyundai Engineering awarded refinery project in Thailand

Hyundai Engineering Co., the construction unit under South Korea’s Hyundai Motor Group, won a $273.2 million refinery project from a major Thai energy company, ...

23-04-2018

Badger to provide technology for new ethylbenzene / styrene monomer plant

Badger Licensing LLC today announced that Fujian Gulei Petrochemical Co., Ltd. (GLPC) has selected Badger’s proprietary technologies for a 600 KTA grassroots ethylbenzene ...

23-04-2018

OMV Schwechat refinery turns 60

On April 22, 1958, the cornerstone was laid for the reconstruction of the OMV Schwechat Refinery after World War II. Since then the refinery has established itself as ...

22-04-2018

CNOOC’s new laboratory acquires high throughput technology from hte

hte – the high throughput experimentation company equips CNOOC Research Institute of Refining and Petrochemicals (a subsidiary of CNOOC) with a high throughput ...

19-04-2018

Lukoil commissions gas processing complex in Uzbekistan

Today LUKOIL has commissioned a Gas Processing Complex at the Kandym fields cluster in Uzbekistan. The official opening ceremony was attended by the President of the ...

19-04-2018