You are currently viewing : Sponsors



Johnson Matthey

P.O. Box 1
Belasis Avenue
Billingham
Cleveland
TS23 1LB
UK


Tel : +44 1642 553 601

Fax : +44 1642 522 542

jmpr@matthey.com

www.jmprotech.com

Number: 32 Page:  [1] 2 3 4 5 »
Display: 

HCN and NOx control strategies 
in the FCC

(White Paper) - Results of research into emissions from the FCC, plus guidance on how to obtain the minimum level of NOx. Increasing environmental awareness ...

Apr-2014

Reformer monitoring via in-tube temperature measurement

A temperature monitoring technology applied to steam reformers in synthesis gas plants provides protection against over-firing plus detailed catalyst ...

Apr-2014

Overcoming high conductivity in process condensate

Analysis of design and operations enabled a refiner to eliminate contaminants from hydrogen plant process condensate by installing a high pressure str ...

Jan-2014

HCN emissions in fluid catalytic cracking

Increased attention to refinery emissions of hydrogen cyanide requires detailed understanding of its formation and conversion in the FCC regenerator

Apr-2013

Best practices for SOx emissions control

Applying the key elements of experience gained since the introduction of 
SOx-reducing additives for FCC operations

Mar-2013

Refinery fuel gas in steam reforming hydrogen plants

Fuel gas is an attractive feedstock for hydrogen production, but appropriate 
catalysts and temperature control are needed to address high olefin le ...

Mar-2012

Catalyst additives reduce rare earth costs

Catalyst additive technologies help to control rare earth costs in fresh FCC catalyst additions and in SOx capture

Jan-2012