You are currently viewing: Videos



Packed bed towers - scrubber

We offer diagnostic solutions to identify bulk level, damaged internal hardware, and distribution, residence time and flow data for scrubbers. By using specialist tracers, we can measure the performance of scrubbers to establish residence time and distribution, carry over and carry under and identify flow characteristics.

Other Literature

Tracerco measurement instruments and servicing videos

Introducing our award winning range of downstream process instrumentation.


Fluid Catalytic Cracking - improve productivity and plan maintenance efficiently

Tracerco can help you understand catalyst and process flow behaviour inside your Fluid Catalytic Cracking (FCC) unit, so you can improve productivity, identify problems and plan maintenance efficiently.

Using a Tru-Scan™, we can measure the height of the catalyst level in the reactor ...


Packed Bed Towers - Tru-Grid™ Scan/PackView™

Tracerco can help you optimise your packed tower performance by analysing liquid flow distribution, liquid retention and checking for damage. You’ll be able to plan maintenance effectively and avoid emergency equipment charges.

Using a Tru-Grid™ scan, Tracerco can verify that ...


Trayed Towers - Tru-Scan™ & FrothView™

Tracerco provides actionable information while the system is online and operating in normal, test or upset conditions. A Tru-Scan™ diagnosis will provide you better insight into tray flooding, weeping and internal damage. Our patented FrothView™ technology offers another level of detail, ...


Reactors - reduce catalyst loss, optimise conversion, and identify critical problems

Tracerco can help you reduce catalyst loss in your reactor, optimise conversion, and identify the source of critical problems.

Using our specialist tracer technology Tracerco can assess vapour and liquid distribution in the reactor. And, we can analyse the reactor’s efficiency by ...


Piping & Flare Systems - determine vapour flow and sludge build-up

Tracerco routinely provides flowrate, leak testing, pipe scanning and meter calibration services. Fast, accurate, and cost effective, our technology will help you determine the flow of vapour, build-up of sludge and other fouling materials in process piping or flarelines. The technology we use to analyse ...


Tanks - measure hydrocarbon, water and emulsion levels and identify sludge

Scans on tanks and spheres gives you a clear picture of hydrocarbon, water and emulsion levels and determine if there is any sludge or plugged vent lines.

Tracerco can measure the height of each phase in your tank, using a PhaseFinder™ neutron backscatter device. This reliable and ...


Separators - real time information on bulk level, phase heights and internal hardware

Our solutions help you to optimise your separator operation and maintenance by providing accurate, real time information on bulk level, phase heights, emulsion and internal hardware.

Tracerco’s, non-intrusive gamma scan technology provides accurate, real time information on the ...


Packed bed towers - scrubber

We offer diagnostic solutions to identify bulk level, damaged internal hardware, and distribution, residence time and flow data for scrubbers. By using specialist tracers, we can measure the performance of scrubbers to establish residence time and distribution, carry over and carry under and identify ...


Heat Exchangers - we can detect leaks to as low as 1ppm

Tracerco has been at the forefront of online leak detection for the last 50 years and can detect leaks to as low as 1ppm. If you have a leak, we can identify the specific exchanger where it's happening. We can identify which exchanger within a bank is leaking. The method is non-intrusive, accurate and ...