-
Modelling to optimise natural gas dehydration
Apr-2009
Computer modelling can help processors to understand the severity of conditions in molecular sieves used for the dehydration of natural gas
-
Operating challenges associated with fines in the delayed coker
Jun-2014
The coking process has been around since the early days of the refining industry. Over the years it has undergone continuous improvements to make it a ...
-
Predicting centrifugal compressor performance
Jan-2019
When a plant revamp is planned, assessing an existing centrifugal compressor to meet new performance requirements is essential.
-
Refining/petrochemical integration: a new paradigm
Sep-2013
The global trend in motor fuel consumption favours diesel over gasoline. There is a simultaneous increase in demand for various petrochemicals such as ...
-
Starting up hydrotreating units with cracked feeds
Jan-2013
A catalyst sulphiding process enables the introduction of cracked or heavy feeds to HDS units without the recommended three-day delay following change ...
-
Pressure surge during crude unloading
Oct-2016
How to avoid pressure surge problems when dissimilar ship to shore offloading operations are interconnected.
-
Troubleshooting crude column constraints
Jul-2017
Multiple limitations to operating capacity were identified and resolved during a column turnaround
-
Processing shale oil in an FCC unit: 
catalyst and profit optimisation
Aug-2015
Adjustments in base catalyst, use of ZSM-5 additives and metal traps enable efficient processing of paraffinic and heavy crude in the presence of metals ...
-
Improving sulphur recovery units
Jul-2006
A new alternative to the Claus unit tail gas treatment has been found in the wet gas scrubber. This can maintain or increase acid gas feed rates to the ...
-
Optimising preflash for light tight oil processing
Jul-2015
For a crude unit handling light tight oil feedstock, a semi-preflash column can deliver significant advantages in energy saving, capacity gain and revamp ...
-
Strategies for improved naphtha processing
Oct-2013
To take advantage of dilbit from Alberta and light oils from shale formations, refiners must develop a strategy for processing additional naphthas and ...
-
Reformer monitoring via in-tube temperature measurement
Apr-2014
A temperature monitoring technology applied to steam reformers in synthesis gas plants provides protection against over-firing plus detailed catalyst ...
-
Catalyst addition in ebullated-bed units
Apr-2005
A simple theoretical approach is available for calculating the catalyst metals content, catalyst physical properties and the effect on catalyst activity. ...
-
Improving VGO hydrotreater operation
Jan-2009
A practical, industrial data-derived tool can give refiners confidence in simulating the actual benefits of additional hydrogen for improved VGO hydrotreater ...
-
Catalyst selection — a refiner’s perspective
Nov-2015
The refining industry is fortunate to have the catalyst suppliers as our partners. They have been leaders in developing new technology for refining.
-
Improving CO2 absorber performance in LNG production
Apr-2015
Simulation of deep CO2 removal in LNG and syngas applications, combined with intercooling, maximises effectiveness of piperazine-promoted MDEA solvent ...
-
Challenges and opportunities of 10 ppm sulphur gasoline: part 1
Jul-2012
Prospect of a worldwide standard for ULSG and the challenges of increased heavy crude supplies demand careful consideration and selection of refinery ...
-
Effect of hydrocarbon partial pressure on FCC propylene production
Jul-2008
Results of cracking experiments are discussed, where the hydrocarbon partial pressure was varied by altering the total reactor pressure, feed rate and ...
-
Next-generation BRIM catalyst technology
Jun-2009
The need for high-activity hydroprocessing catalysts continues, with US, European and Asian refiners already supplying their markets with ultra-low-sulphur ...
-
Tail gas scrubber sulphur plant by-pass ability aids emergency shutdowns and startups
Nov-2015
From the European Union to the USA, national and international bodies are putting in place increasingly stringent legislation to limit emissions.
-
Mercury removal from liquid hydrocarbons
Mar-2005
Various methodologies for the measurement of mercury levels in gaseous and liquid hydrocarbons are available, while inorganic routes for mercury removal ...
-
Recovering and refining precious metals
Nov-2015
Some factors to consider when choosing a route for recovering precious metals from catalyst.
-
A new approach to treating shale gases
Apr-2012
Shale gas can be challenging to treat, but mass transfer rate-based simulation and appropriate tower internals can make it no harder to treat than other ...
-
Towards a zero gasoline production refinery: part 1
Jul-2013
Integrating products from the steam cracker, aromatics complex and FCC unit to produce petrochemicals without gasoline may offer more attractive margi ...
-
Evaluating FCC flue gas emission-control technologies
Jan-2008
Comparing technologies for reducing FCCU flue gas emissions. Special emphasis is placed on selecting cost-effective solutions, particularly in the area ...
-
Nature of errors in machinery diagnostics
Jan-2020
A reliability theory has been developing for almost 70 years, and all the time scientists, engineers and practitioners attempt to point out an instance ...
-
Boosting hydrocracker heavy feed conversion
Apr-2020
New pore structure in nano-engineered zeolites helps to improve conversion efficiency of heavy molecules, improving product yields and qualities.
-
Heat storage in solar power plants
Jun-2020
Avoiding freezing and leakage: optimal thermal management for the use of molten salt in solar thermal power plants with concentrated radiation
-
Improving level control under extreme conditions such as in FCC units
Jun-2020
Catalytic cracking is one of the most important conversion process used in petroleum refineries. It is a widely used process in the refineries for converting ...
-
In-situ refinery and storage terminal environmental remediation
Jun-2020
In the 1960’s there were five refineries built close to Ingolstadt. The location was central to the major refined products markets in Bavaria. The TAL ...
-
2019: The Year of Gasoline Analysis on the VUV Analyzer™ Platform
Jul-2020
VUV Analytics™, pioneers of developing analytical tools based on vacuum ultraviolet (VUV) detection technology, is dedicated to providing fast, easy, ...
-
Bring your operation on-line and into the future with Wasson-ECE & Eclipse E-VUV
Jul-2020
Accurate, easy, and fast solutions are key for any operation to be successful. This is no more apparent than in the hydrocarbon processing (HPI) and chemical ...
-
Detailed hydrocarbon analysis (DHA) — past, present and future Part 2
Jul-2020
In part two of this series I want to focus on the future of detailed hydrocarbon analysis. If you remember my first article, I talked a little about my ...
-
Detailed hydrocarbon analysis (DHA) — past, present and future Part 1
Jul-2020
A Historical Perspective. In the 1990s, gasoline regulations were changing rapidly. Lead antiknock compounds were banned. Typical gasoline benzene levels ...
-
Downtime damages environmental performance too
Jul-2020
Advanced technologies can reduce the environmental impact of unexpected shutdowns.
-
Increase duty in tube side condensers
Jul-2020
A retrofit is shown to improve several aspects of tube side condensation processes.
-
Introducing the new ASPYRE DT — now up to 2100 Amps
Jul-2020
Take your heat control system to the next level with the latest Watlow power and temperature controllers. We’re proud to introduce our new ASPYRE DT ...
-
Model predictive control in a lube oil complex
Jul-2020
An application of model predictive control targeted optimum performance from a refinery’s propane deasphalting unit.
-
Evolution of a digital twin Part 2: Use of the digital twin
Jul-2020
A two-part article provides a step-by-step introduction to the concept, construction and application of a digital twin for the lifecycle of an ethylene ...
-
Jul-2020
Associated gas can be an important component of future fuel supplies if new gathering pipelines and tighter regulations come into play.
-
Capturing value through integrated improvements at the FCC-PT—FCC complex
Jul-2020
Introduction: the importance of fcc-pt—fcc unit integration. As they strive to remain competitive in the face of changing market dynamics, many refiners ...
-
Automated level measurement cuts desalter upsets (TIA)
Aug-2020
The path from crude oil to high quality, usable products involves complex technical production and processing procedures in refineries, whereby several ...
-
Cutting the cost of refinery process control and CEMS gas analysis
Aug-2020
Developments in equipment functionality to reduce maintenance costs, innovative service delivery which can enable outsourcing and an array of digital solutions ...
-
Revamp raises crude flexibility and profits (TIA)
Aug-2020
Hyundai Oilbank (HDO) has been operating an atmospheric residue desulphurisation (ARDS) unit, producing feed for the RFCC unit, at its Daesan, South Korea, ...
-
Analyser delivers fast quality checks for biorefinery (TIA)
Aug-2020
The demand for biofuels has increased in recent years, with the EU requiring that 10% of the total transport fuel in its member countries is to come from ...
-
Aug-2020
Assuming that this pandemic has an end-point, businesses in general and refiners more than most would prefer a restoration of near-normal to some realignment ...
-
Troubleshooting premature tower flooding
Aug-2020
Thorough analysis of field data and tray hydraulics together with gamma scanning were key factors in the successful troubleshooting of premature flooding ...
-
Planning to counter economic turbulence
Sep-2020
Synchronising engineering and planning models should be a key aim to support the resilience and agility needed for economic recovery
-
HDXRF vs ICP for nickel and vanadium in crude oil
Sep-2020
Technology introduced over the last decade, such as horizontal drilling and hydraulic fracturing, has led to new sources of light tight oil (LTO). LTO ...
-
Enable cost savings and optimise production with real-time sulphur results
Sep-2020
The demand for biofuels has increased in recent years, with the EU requiring that 10% of the total transport fuel in its member countries to come from ...
-
Sludge dewatering technologies
Jan-2022
Higher levels of pollutants and solid wastes from opportunity crude processing require the most effective and economical approach to sludge dewatering ...
-
Jan-2022
Improvements in performance and energy efficiency were achieved during the turnaround of a crude distillation unit.
-
Jan-2022
Tips on how to achieve effective installation of fluid system components during a turnaround.
-
Impact of not integrating capex in shutdowns
Jan-2022
Capital projects must comply more with detailed practices and principles.
-
Hydroprocessing routes for flexible residue upgrading
Jan-2022
Efficient and flexible resid processing options maintain profitability and reduce risk when price volatility is high.
-
Optimising critical level control in desalters by using multiphase level measurements
Dec-2021
Refineries are a complex set of various operating units designed to process crude oil into refined products such as gasoline, diesel, jet fuels and feedstocks ...
-
Digital data management helps national oil companies improve operations
Dec-2021
National oil companies (NOCs) face a host of unique challenges compared to their private counterparts. NOCs, owned by national governments and their populace, ...
-
Shaping the future of refining with advanced technologies (ERTC)
Dec-2021
The refining industry has a unique expertise, which is to process and convert multiple feedstocks made of highly complex molecules. Refining should think ...
-
Precious metals catalyst management: measuring quality of service (ERTC)
Dec-2021
In today’s highly competitive, global petroleum and petrochemical industry, the importance of supply management has never been greater.
-
Refiners weigh opportunities for circular asset decarbonisation polymer production (ERTC)
Dec-2021
Zero to single-digit returns for European refiners compel the development of revenue streams around low carbon products. In addition to biofuels, hydrogen ...
-
Sustainable process recovers ultra high-purity styrene from waste polystyrene (ERTC)
Dec-2021
Polystyrene (PS) chemical recycling, as opposed to mechanical recycling, is an emerging route to establish circularity in PS and qualify the recycled PS ...
-
Controlling hyper-active catalysts with injection (ERTC)
Dec-2021
Starting up a hydrocracker after a catalyst change-out can be complex and operationally challenging, especially when high-activity cracking catalysts have ...
-
Game-changing catalytic dewaxing: Zeopore reaches 30°C cloud point improvement (ERTC)
Dec-2021
Making diesel winter-proof is currently an expensive process as refiners face high diesel yield losses or have to turn to expensive additives or kerosene ...
-
A streamlined approach for FCC catalyst and additive management and order fulfilment (ERTC)
Dec-2021
Johnson Matthey is a global leader in sustainable technologies, and we apply our cutting-edge science to create solutions with our customers that make ...
-
Advanced biofuels: where are the long-term opportunities? (ERTC)
Dec-2021
Global energy demand is projected to grow by as much as 25% through 2040 in parallel with GHG emissions reduction targets. Hydrocarbon-based fuels will ...
-
How to successfully upgrade plastic pyrolysis oil and make it suitable for a steam cracker (ERTC)
Dec-2021
As the plastics industry is slowly taking action with recycling and renewables initiatives, the global demand for plastics continues to increase.
-
Value engineering: a continuous front-end process (ERTC)
Dec-2021
The concept of front-end loading of projects is not new, where robust planning and design early in a project’s lifecycle helps to influence changes in ...
-
Optimising hydrotreating catalyst reuse with Excel rejuvenation technology (ERTC)
Dec-2021
The refining industry is currently under pressure to optimise profit margins in challenging financial conditions while adapting to a changing global climate ...
-
The carbon negatives: impact of increasing carbon and coke in spent precious metals catalysts (ERTC)
Dec-2021
There is a trend in the petroleum and petrochemical refining industry over the past five years or so as an ever-increasing percentage of carbon is being ...
-
Environmental impact of the precious metal value chain on refineries (ERTC)
Dec-2021
The world is aligned to fight climate change and has set challenging climate targets, which are shown, for example, in the Paris Climate Agreement.
-
Energy efficiency: project optimisation through proven tools and practices (ERTC)
Dec-2021
The world’s refining sector is at a pivotal inflection point where operators must evolve to remain competitive following a challenging year.
-
From refining to chemicals, a switch of the yield in four stages (ERTC)
Dec-2021
Over the last decade, the demand for main petrochemicals intermediates (ethylene, propylene, paraxylene) increased by an annual growth rate of around 4%. ...
-
Renewing the fight against phosphorus (ERTC)
Dec-2021
With the goal of furthering progress towards a sustainable future, governments in the US and EU have made their demands clear: a significant amount of ...
-
Sulphur spiking agents for hydroprocessing units activation (ERTC)
Dec-2021
The hydroprocessing process employs catalysts in which the active species are molybdenum or tungsten sulphides promoted by cobalt or nickel sulphides. ...