ARTICLES
-
Understanding basic principles of flow calculations
Mar-2008
Valve size often is described by the nominal size of the end connections, but a more important measure is the flow that the valve can provide.
-
Hydrotreating in the production of green diesel
Apr-2010
A novel scheme enables co-processing of light gas oil and tall diesel to produce a renewable diesel meeting EN 590 specifications
-
Optimise hydrocracker operations for maximum distillates
Apr-2012
Estimation of an accurate operating window for a hydrocracker enables refiners to minimise yields of light ends and maximise diesel production
-
Residue desulphurisation and conversion
Apr-2006
The current market forces that presage a boom in resid hydrotreatment are examined along with recently reported progress in technology
-
Meeting Euro IV fuel specifications
Jan-2006
Pretreating technology and special catalysts can help refiners meet the current and forthcoming European environmental regulations and improve their FCCU ...
-
Diesel hydrotreating and mild hydrocracking
Oct-2011
Increased hydroprocessing capability must provide an acceptable long-term return on capital, while producing the desired product yields and qualities
-
Comparison of thermal cracking and hydrocracking yield distributions
Sep-2011
Obtaining the maximum performance from existing residua upgrading equipment is achieved by maximum asset utilisation.
-
Reactor effluent air cooler safety 
through design
Oct-2013
Quality-controlled replacement of carbon steel with Duplex 2205 for revamps can increase the service life and reliability of the REAC in the high-pressure ...
-
Understanding cloud point and hydrotreating relationships
Feb-2013
As the distillate markets allow for increased distribution worldwide, refiners need to be more aware of the additional product specifications that can ...
-
Pretreatment of resid FCC feedstocks
Jul-2004
How a refinery optimised hydrogen consumption to raise API “shift”, enhancing FCC economics. The effect of heavy feedstock reactivity on the operation ...
-
Future of opportunity crudes processing
Oct-2011
Five critical drivers help refiners remain profitable and sustain long-term business goals while processing relatively inexpensive, low-quality crudes
-
Premium base oil production by the hydroprocessing route
Aug-2013
The worldwide demand for lubricants is expected to increase by 2.6 percent annually through 20151, with Asia predicted to remain the fastest growing r ...
-
Advances in residue hydrocracking
Mar-2018
Recent developments in ebullated bed hydrocracking technology target high residue conversion and high quality products.
-
Evaluating opportunity crude processing
Oct-2006
Is processing opportunity crudes for every refiner? Technical challenges and economic benefits from processing high-acid crudes and bottom-of-the-barrel ...
-
FCC feed preparation for improved quality
Apr-1997
The benefits of hydrotreating heavy gas oil FCC feedstocks at different levels of severity are discussed in this article, particularly the operating success ...
-
Decrease catalyst costs by regeneration, analysis and sorting
Mar-2012
Use of regenerated catalyst can be maximised by careful sampling and analysis of spent catalyst to construct a reactor contamination profile
-
Alternative routes to paraxylene production
Apr-2004
An integrated refining and petrochemical approach to paraxylene manufacture from various feedstocks, such as excess aromatics in reformate or pyrolysis ...
-
Improving residue hydrocracking performance
Jul-2011
Trials with a catalyst system for enhanced transfer of hydrogen to asphaltenes show reduced sediment formation and fouling in ebullated-bed residue hy ...
-
Estimating silicon accumulation in coker naphtha hydrotreaters
Mar-2012
Improved sampling and analysis of silicon in the feed enable a significant gain in the cycle life of coker naphtha hydrotreater catalysts
-
Paraffins isomerisation options
Apr-2005
Isomerisation technologies are available, from once-through and deisohexaniser recycle processes to recycle schemes involving molecular separation pro ...
-
Catalyst stripper improves FCC unit performance
Jul-2012
Stripper internals with improved mass transfer characteristics improve the performance of an FCC unit
-
Jan-2006
How much CO2 can a refinery release into the atmosphere? This is one of the many challenges facing refineries when it comes to reducing CO2 emmisions
-
Thermodynamic model of sediment deposition in the LC-Fining process
Apr-2008
The LC-Fining ebullated bed hydrocracking process is used to hydrocrack residuum. In this process, sediment deposition in the downstream equipment sometimes ...
-
The ART of trapping silicon and arsenic
Feb-2013
In an effort to lower costs and improve refining margins, refiners often look for opportunities to purchase lower cost crudes or other feedstocks
-
Hydrocracker revamp for Grangemouth refinery
Jul-1998
BP Oil’s Grangemouth refinery has completed an extensive revamp of its hydrocracker and FCC, reducing production of fuel oil and upgrading to middle ...
-
Boosting mild hydrocracking performance
Aug-2020
Optimising its mild hydrocracking operations using new catalyst developments enabled a refinery to meet more complex targets for fuel quality.
-
Pilot plant studies of hydrotreating catalysts
May-2020
Studies of catalysts for hydrotreating lubricant base oil delivered similar results from conventional and high throughput pilot plants
-
Enhancing flexibility in two-stage hydrocrackers
Aug-2022
Shifting markets and refined product priorities compels refiners to find the flexibility for shifting from middle distillate to naphtha for petrochemical ...
-
Apr-2021
An alumina-supported catalyst for ULSD production or hydrocracking pretreat provides longer catalyst cycles, higher throughput, and better product qua ...
-
What type of catalyst do we need for low pressure hydrotreating of middle distillates?
Feb-2021
Responses to a question in the Q1 2021 issues Q&A Feature
-
Jan-2023
What is the best estimation for refinery and petrochemical product demand in 2023?
-
Improving residue hydrocracking performance
Jul-2011
Trials with a catalyst system for enhanced transfer of hydrogen to asphaltenes show reduced sediment formation and fouling in ebullated-bed residue hy ...
-
Making innovative catalysts to trigger a reaction in chemical, gas and refining processes
Aug-2020
When you are creating high-quality petrochemical end products, you must first trigger a reaction.
-
Optimising hydrotreating catalyst reuse with Excel rejuvenation technology (ERTC)
Dec-2021
The refining industry is currently under pressure to optimise profit margins in challenging financial conditions while adapting to a changing global climate ...
-
Improving cold flow in diesel fuel
Feb-2021
Hydrotreating arrangements that overcome challenges to diesel’s cold flow properties meet current specifications more economically than blending and ...
-
The future for hydrocracking: part 1
Nov-2017
Hydrocracking technology faces challenges and opportunities amid diesel emission scandals, low sulphur marine fuels, and the growing position of electric ...
-
Optimise hydrocracker operations for maximum distillates
Apr-2012
Estimation of an accurate operating window for a hydrocracker enables refiners to minimise yields of light ends and maximise diesel production
-
Advances in residue hydrocracking
Mar-2018
Recent developments in ebullated bed hydrocracking technology target high residue conversion and high quality products.
-
Jan-2006
How much CO2 can a refinery release into the atmosphere? This is one of the many challenges facing refineries when it comes to reducing CO2 emmisions
-
The ART of trapping silicon and arsenic
Feb-2013
In an effort to lower costs and improve refining margins, refiners often look for opportunities to purchase lower cost crudes or other feedstocks
-
Developments in hydrotreating catalyst
Sep-2016
How a second generation hydrotreating catalyst was developed for high pressure ultra-low sulphur diesel units and hydrocracker pretreaters.
-
Dec-2016
Feed containing fines, in-organic matter, sludge, rust etc. can cause excessive pressure drop build-up issues in hydroprocessing reactors.
-
Revamping an integrated hydrocracker and lube base oil unit
Dec-2020
Process and catalytic advances enabled large-scale expansion of an integrated unit to increase fuels and base oil production.
-
Selecting catalysts for marine fuels production
Jun-2021
Accelerated activity and stability testing of hydrotreating catalysts.
-
Protecting your hydroprocessing reactor
Jun-2021
Owners and operators respect a hydroprocessing reactor’s minimum pressurisation temperature but can fail to understand factors other than the temper ...
-
Multi-phase project enables switch to heavier crude (TIA)
Aug-2021
In recent years, deasphalted oil (DAO) hydrocracking has emerged as a highly attractive investment option, principally because it provides the opportunity ...
-
Hydroprocessing routes for flexible residue upgrading
Jan-2022
Efficient and flexible resid processing options maintain profitability and reduce risk when price volatility is high.
-
Nov-2017
A line-up featuring ebullated bed hydrocracking delivers full conversion of bitumen, including production of premium diesel fuel
-
Reactor effluent air cooler safety 
through design
Oct-2013
Quality-controlled replacement of carbon steel with Duplex 2205 for revamps can increase the service life and reliability of the REAC in the high-pressure ...
-
Choosing quench interbed technology
Jan-2010
A design for hydroprocessing interbed internals favours separate mixing of gas and liquid phases before contacting of the two phases occurs
-
Jan-2023
What is the best estimation for refinery and petrochemical product demand in 2023?
-
What makes hydroprocessing different to other refining technologies?
Dec-2022
Most of the people that have worked around refineries for some time, feel that they have mastered the basics of the major refining technologies and feel ...
-
Enhancing flexibility in two-stage hydrocrackers
Aug-2022
Shifting markets and refined product priorities compels refiners to find the flexibility for shifting from middle distillate to naphtha for petrochemical ...
-
Taking hydroprocessing reactor cooling off the critical path
May-2022
Rapid cool-down of a typical hydroprocessing unit’s recycle gas compressor offgas can be used to cool spent reactor catalyst while avoiding the need ...
-
Optimising refinery margins with rejuvenated catalysts
Jan-2022
Rejuvenated catalysts compare well with fresh catalyst for performance and stability, with added cost savings.
-
Hydroprocessing routes for flexible residue upgrading
Jan-2022
Efficient and flexible resid processing options maintain profitability and reduce risk when price volatility is high.
-
Optimising hydrotreating catalyst reuse with Excel rejuvenation technology (ERTC)
Dec-2021
The refining industry is currently under pressure to optimise profit margins in challenging financial conditions while adapting to a changing global climate ...
-
Sulphur spiking agents for hydroprocessing units activation (ERTC)
Dec-2021
The hydroprocessing process employs catalysts in which the active species are molybdenum or tungsten sulphides promoted by cobalt or nickel sulphides. ...
-
Recovering silicon poisoned catalyst
Nov-2021
Silicon poisoning usually spells the end for hydrotreating catalysts, but a rejuvenation process can extend the effective life of silicon trap catalys ...
-
Discovering hydrocracking units potential with pretreat and tailored hydrocracking catalysts
Sep-2021
A refiner uses pretreat and hydrocracking catalyst to maximise heavy naphtha, kerosene, and diesel production with improved product properties.
-
Multi-phase project enables switch to heavier crude (TIA)
Aug-2021
In recent years, deasphalted oil (DAO) hydrocracking has emerged as a highly attractive investment option, principally because it provides the opportunity ...
-
Selecting catalysts for marine fuels production
Jun-2021
Accelerated activity and stability testing of hydrotreating catalysts.
-
Protecting your hydroprocessing reactor
Jun-2021
Owners and operators respect a hydroprocessing reactor’s minimum pressurisation temperature but can fail to understand factors other than the temper ...
-
Increasing profit in hydrocracking and diesel hydroprocessing
Jun-2021
A drop-in catalyst for hydrocracking pretreat and distillate hydrotreating raises activity with heat management savings.
-
Tail gas hydrotreating in a high H2S gas plant
Jun-2021
A tail gas hydrotreating catalyst delivers stable sulphur recovery operations, including low emission levels and energy savings, with a low rate of de ...
-
Apr-2021
An alumina-supported catalyst for ULSD production or hydrocracking pretreat provides longer catalyst cycles, higher throughput, and better product qua ...
-
Improving cold flow in diesel fuel
Feb-2021
Hydrotreating arrangements that overcome challenges to diesel’s cold flow properties meet current specifications more economically than blending and ...
-
Feb-2021
Responses to a question in the Q1 2021 issues Q&A feature
-
What type of catalyst do we need for low pressure hydrotreating of middle distillates?
Feb-2021
Responses to a question in the Q1 2021 issues Q&A Feature
-
Increased flexibility and profitability from hydroprocessing catalyst
Jan-2021
Refiners have faced, and will continue to face, numerous external challenges from multiple fronts to maintain a profitable operation.
-
Revamping an integrated hydrocracker and lube base oil unit
Dec-2020
Process and catalytic advances enabled large-scale expansion of an integrated unit to increase fuels and base oil production.
-
Arkema develops new digital features for the sulphiding of hydroprocessing catalysts (ERTC)
Nov-2020
In 2020, Arkema successfully tested and implemented a digital environment that both eases and strengthens data communication with the refinery during the ...
-
Oct-2020
Response to a question in the Q3 2020 issue of PTQ
-
Making innovative catalysts to trigger a reaction in chemical, gas and refining processes
Aug-2020
When you are creating high-quality petrochemical end products, you must first trigger a reaction.
-
Boosting mild hydrocracking performance
Aug-2020
Optimising its mild hydrocracking operations using new catalyst developments enabled a refinery to meet more complex targets for fuel quality.
-
Watlow’s thermal systems optimize your refinery
-
New fired heaters
-
Compressors for demanding applications
-
Tri block, double block and bleed valve from ZWICK
-
Evonik Catalysts. Let’s make a difference
-
Turbomachinery and Pump Symposia, September 26-28
-
FCC online diagnostic services for FCCU
-
Europe's largest manufacturer of tower packings
-
Hydrotreating and hydrocracking catalysts
SPONSORS