You are currently viewing: Literature


Number: 47 Page:  [1] 2 »
Display: 

Literature

Advanced process control for Prime-G+™

APC uses a model-based predictive control technology that drives the process towards the desired targets through the manipulation of several variables simultaneously while observing all process constraints. APC has a proven track record in delivering business objectives: reducing energy ...


Avoid unnecessary costs by understanding process problems before taking action

When a piece of process equipment starts experiencing problems and producing off-spec product, every engineer’s reaction is to make a change to “fix” the problem and get it back on-spec. yet, many plants lack adequate instrumentation to completely diagnose the cause of ...


Clora 2XP: Sub-ppm chlorine analysis

Clora® 2XP is designed for use with liquid hydrocarbons such as aromatics, distillates, heavy fuels and crude oils, as well as aqueous solutions. The enhanced precision of Clora 2XP is ideal for testing related to catalyst poisoning in reformers or for sites with fluid catalytic crackers ...


Clora Online: Continuous chlorine analysis in process streams

Chlorine contributes significantly to the corrosion of plant equipment and must be treated accordingly. With ever-changing crude quality and potential for process upsets, chlorine levels can shift quickly, making real-time analytical results invaluable. Powered by MWDXRF®, Clora® ...


Clora: Monitor chlorine in liquid hydrocarbons

Clora® is a compact analyzer to measure total chlorine in liquid hydrocarbons such as aromatics, distillates, heavy fuels, crude oils, and aqueous solutions. Clora delivers unprecedented accuracy and precision for petroleum and petrochemical applications where ease-of-use, reliability ...


Continuous level - Non-contacting measurement

Non-contacting measurement technology by Berthold. The level measurement technology by Berthold is used in a variety of industrial sectors – ranging from the chemical to the waste water industry. It is suitable for measuring ranges of just a few millimetres up to several metres. ...


Crude oil contaminants: chlorine and the desalting process

Crude oil contains many contaminants which present challenges to refiners. Some contaminants occur naturally in the crude oil and others are accumulated in the upstream process. The primary means to remove these contaminants is the desalting process.


Density, concentration and solids content

Non-contacting measurement technology made by Berthold. Berthold density measurement systems are used for the continuous process control on pipelines and in vessels. Density, concentration and solids content are determined in a non-contacting manner, without affecting the flow properties ...


Digitalization manifesto - Now its time

At KBC we believe in a world where plants operate with: No safety incidents, No unplanned outages, Rigorous adherence to operating plans, Agile response to market changes and plant disturbances, A motivated and informed workforce, A culture of profitability. We call this ‘Excellence’. KBC ...


Exchanger leak testing - chemical tracers

Tracerco has been at the forefront of the development of online leak detection for the last 40 years. The method allows the detection of leaks as small as 0.5%. However, customer demands to measure smaller leaks affecting product quality, has prompted extensive research to develop alternative ...


Fuels analysis made simple

Analyzing finished fuels and feedstocks is a complicated process traditionally involving multiple analytical techniques, expensive dyes; multiple columns, valves, and traps; messy solvents; complicated hardware; and lots of analysis time. In order to obtain meaningful results, all of these ...


How much time can you save by switching to Sindie 2622 Gen3?

Sindie 2622 is renowned for its precision, accuracy, and ease of use. However, one drawback to the ASTM D2622method is the requirement for duplicate determinations of samples ≤100 ppm. This equates to 20 minutes of measurement time on the traditional Sindie 2622 Gen2 [(300s background ...


indie 2622: 2622 & 7039 sulfur analysis as low as 0.15 ppm

Sindie® 2622 Gen 3 complies with ASTM D2622, D7039 and ISO 20884 methods, enabling complete flexibility in sulfur analysis. With no compromises in detection, performance and reliability, Sindie 2622 is the ideal sulfur analytical solution from ultra-low sulfur diesel and gasoline to ...


Interface and Multiphase Level Measurement

Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different ...


Interface measurement in desalters

Interface measurements in desalters are often regarded as not being very critical, even though every drop of oil, to be refined, passes through the desalter. As refineries try to maximize their margins, so-called opportunity crudes are often used. These crude oils generally contain increased ...


Level Switch - Mini-Switch LB 471

Application. The BERTHOLD level switch is used in all branches of industry, including the food industry. This measurement system is applicable where one or more alarm levels of liquids or bulk solids have to be monitored. In fact, the BERTHOLD level switch is suitable for installation ...


Making desalter vessels transparent to optimise crude processing

Making Desalter Vessels Transparent to Optimise Crude Processing... whatever the blend. To improve margins, refiners continuously look to optimise feedstock blends. Variability can bring significant operational challenges during the refining process that must be overcome. One critical ...


Making the invisible visible

In FCC Units (Fluidised Catalyst Cracking Units) the atmospheric residue from the distillation is cracked to LPG, naptha and other components. This sometimes leads to “invisible” deposits inside the Riser. This article features Tracerco’s ThruVision™ scans to illustrate ...


Measurement instruments and servicing

Our Measurement Instruments business designs and manufactures a range of bespoke, low maintenance, high reliability instruments providing operators with real time measurements and in-situ visualisation. Our experienced team technically supports an extensive range of nucleonic measurement ...


Measurement solutions for the refining industry

Optimize your production throughput with increased safety and reliability. Berthold Technologies radiometric instruments for non contacting level and density measurement are widely used in the global oil refining industry. Among our customers are well-known companies like Exxon Mobil, ...


MINISCAN IR LOG

LOGical Solution for Condition Monitoring of Lubricants, Oils and Greases. The MINISCAN IR LOG is a highly versatile and extremely fast FTIR analyzer, designed for on-site condition monitoring of oils and greases. It is also capable of measuring low or high levels of water in oil accurately ...


MINISCAN IR VISION - top performer in portable fuel analysis

The MINISCAN IR VISION is a high speed, compact and robust FTIR fuel analyzer for the comprehensive and automatic measurement of gasoline, jet and diesel fuels. The analyzer is configured to measure more than 100 fuel parameters and components for fuel blending, for quality inspection ...


Phoebe: Total phosphorus analysis as low as 0.4 ppm

From crude oil to bio-fuels, in additives or water, Phoebe® delivers unprecedented precision and accuracy for quantification of phosphorus. Phoebe delivers a LOD of 0.4 ppm in hydrocarbon matrices in a ten-minute measurement cycle.


PI System™: The inside secret of IOT in Oil & Gas

OSIsoft’s PI System gives Oil & Gas engineers real-time insight into operations to reduce cost, improve safety and reliability, and enable data-based decisions for long-term strategic success.The PI System captures data from sensors, meters, SCADA, DCS, and other devices and ...


Plant control - advanced burner control (plus)

Applications: The design intent is to have accurate SRU tail gas quality control in order to optimize sulfur recovery. ABC provides that. It is clearly superior over conventional SRU control and has always been Jacobs Comprimo®’s control system of choice for the EUROCLAUS®/SUPERCLAUS® ...


S, Ni, V, and Fe analysis of crude oil using HDXRF®

Test methods for measuring sulfur content, like ASTM D4294 and ISO 8754, have become critical for assessing the value of crude oil. The blending of crude oils from different sources has become more commonplace within the industry to meet specifications for the classification of sweet crude ...


SERVOFLEX Micro i.s. 5100

Intrinsically safe analyzer measuring O2, CO or CO2. High performance oxygen designed for the measurement of toxic and flammable gas samples, the intrinsically safe Micro i.s 5100 is a unique analyzer certified to Zone 0 and Zone 1, and suitable for measuring percent levels of O2, CO or ...


SERVOFLEX Mini HD

Rugged and durable oxygen, carbon monoxide and carbon dioxide portable analyzer designed for field and light industrial use. The MiniHD 5200 is an ultra-sensitive analyzer designed for O2, CO and CO2 monitoring in common gas mixtures. With a rugged and durable design, the MiniHD is optimized ...


SERVOMEX OxyDetect

Non-depleting Paramagnetic oxygen monitor designed for hazardous area environments. The Servomex OxyDetect is a life safety monitor designed for safe area or hazardous area environments without the sensor deterioration that affects traditional electrochemical sensors.    ...


Servomex product guide

Our industry-leading gas analyser range and systems, matched to your industry requirements. Developed and manufactured in our UK and Americas Technical Centers, Servomex analyzers are hand-built to precise requirements. This ensures every product we make provides performance optimized ...


SERVOPRO 4900 Multigas

High-specification digital continuous emissions (CEMS) analyzer, designed for multi-gas measurement of criterion pollutants, greenhouse gases and reference oxygen. The advanced SERVOPRO 4900 Multigas delivers high-performance multi-gas monitoring designed specifically for the continuous ...


SERVOTOUGH FlueGasExact 2700

High performance combustion process analysis of oxygen and combustibles, designed for use in the most hazardous and challenging location. Armed with an integral sampling system custom-designed for operation in some of the hottest and most extreme combustion environments, the FluegasExact ...


SERVOTOUGH H2scan

Explosion-proof in-line hydrogen process analyzer, using a solid-state, non-consumable sensor configured to operate in process gas streams. The H2Scan hydrogen process analyzer features thin film technology that provides a direct hydrogen measurement that is not cross-sensitive to other ...


SERVOTOUGH Oxy 1900

Leading-edge, safety-enhanced oxygen analysis for hazardous or challenging applications. The award-winning Oxy 1900 sets the standard for O2 gas analysis, delivering a feature-rich solution designed to meet the monitoring needs of even the most challenging applications. At the heart ...


SERVOTOUGH OxyExact 2200

High specification process oxygen analyzer, designed for ultimate monitoring performance. The OxyExact safe area oxygen analyzer combines high precision Paramagnetic O2 sensing technology into a flexible and robust safety-enhanced design, optimized to meet the needs of demanding process ...


SERVOTOUGH SpectraExact 2500

Rugged photometric multigas gas analyzer designed for demanding process applications. Designed to provide a highly flexible analytical solution adaptable to many applications, the SpectraExact (2500) range delivers a winning combination of proven performance and flexible operation in a ...


SERVOTOUGH SpectraScan 2400

Tunable filter infrared absorption on-line gas analysis platform ideal for the measurement of light hydrocarbons. The SERVOTOUGH SpectraScan is a real-time Tunable Filter Infrared analyzer capable 
of accurately separating light hydrocarbon components. Using a unique wavelength scanning ...


Signal: Total silicon analysis as low as 0.65 ppm

From gasoline to ethanol and toluene, Signal® delivers total silicon analysis. Powered by MWDXRF®, Signal is a robust analysis solution for demanding petroleum and industrial environments.


Sindie +Cl: Measure both sulfur and chlorine with one instrument

Sindie +Cl is a two-in-one instrument enabling trace analysis of both sulfur and chlorine with one push of a button. It is the ideal solution to certify sulfur levels in finished products, assess chlorine for corrosion mitigation, and optimize process parameters.


Sindie +Pb: Sulfur plus lead in petroleum products

As aviation industry requirements become more stringent, lead detection is critical in such products as aviation gasoline and jet fuel. Sindie® +Pb delivers unprecedented precision and accuracy for sulfur and lead detection.


Simplify crude assay importing in UniSim design by utilizing H/CAMS

Haverly H/CAMS is the industry leading assay crude management software with over 2000 assays. Honeywell's UniSim Design software links to Haverly H/CAMS via a COM interface and allows you to import proprietary assays with just a few clicks. This functionality increases engineering effectiveness, ...


Intelligently predict and prevent corrosion across your operations

Learn how the fight against corrosion never stops - it is a fact of life every day across Oil & Gas, Refining and Pipeline operations, what-if you could have insight into real-time corrosion rates in your process?  Honeywell Predict® Corrosion Suite provides the next ...