logo

Back

The UOP Callidus scepter pilot and scepter model P1 portable igniter

Meeting the refining and petrochemical challenge. As a result of the efforts of UOP Callidus engineers and with input from our customers, the Scepter Pilot was developed. The new pilot system was designed at the world-class industrial scale, UOP Callidus Research and Test Facility, and only released after three years of extensive evaluation.

The Scepter Pilot is available in two models to meet the demands of industry. UOP Callidus Scepter Pilot is available in two models, the original permanent Scepter Pilot and the Scepter Model P1 portable igniter. Each is designed to address the rugged requirements of the refining and petrochemical industries. With selfcontained electronics, stainless steel construction throughout, hermetically sealed flame and ignition rods, the Scepter pilots stand up to rough handling and severe service. The high internal energy igniter cannot short out and the flame rod is impervious to moisture, providing reliable spark ignition, light-off and monitoring. For dependable, non-compromising pilot performance, turn to the Scepter.

DOWNLOAD LITERATURE

View More

  • Advanced rental flare technology

    Rental Services: The UOP Callidus Rental Group has the unique ability to bypass the normal work flow with our own project design and management team to fulfill all of our customer’s rental needs. If it’s not in our vast inventory of existing parts and equipment, we can create a unit or modify ...

  • UOP Callidus Jade burner

    The Jade Burner from UOP Callidus is the first ultra-low NOx Tail Gas Thermal Oxidizer Burner designed and built specifically to deliver ultra-low Nox emissions with no special physical or operational requirements. In many cases, incorporating the Jade burner into a thermal oxidizer results in the lowest ...

  • Maximising naphtha through hydrocracking: Refinery of the future


    Globally the demand for petrochemicals is increasing at rates nearly 1.5 times GDP. In regions where there is a heavy investment in large-scale para-xylene capacity there is a significant demand for naphtha. However not all naphtha is suitable to produce aromatics. Heavy naphtha is required, ...

  • UOP mercury removal for natural gas production

    Mercury, when present in gas processing facilities, can be a primary cause of corrosion, equipment failure and downstream catalyst deactivation. For more than 60 years UOP has continuously been a pioneer in the adsorbent industry, from inventing the first commercially produced synthetic zeolites, ...

  • UOP, A Honeywell Company, changing the world one solution at a time

    Honeywell UOP processes have changed the world. Since the groundbreaking introduction of the Dubbs Process in 1914, Honeywell UOP’s engineers and chemists have excelled in turning laboratory science into industrial reality, establishing the foundation for today’s modern refining industry.

  • UOP adsorbent solutions in refining

    A wide variety of contaminants can be effectively and economically removed from numerous hydrocarbon streams in petroleum refineries via non-regenerative and regenerative adsorbents. It is necessary to remove contaminants, including: H2S, COS, CS2, HCl, HF, Hg (elemental mercury), AsH3 (arsine), PH3 ...

  • Celebrating a century of innovation in the oil & gas industry

    UOP celebrates its 100th year in business in 2014, and in many ways our history is analogous to the development of the world’s oil and gas industry. We have accomplished many great things during the last century. For that, we owe a tremendous debt of gratitude to our customers, who helped us develop ...

  • Process heater burners, flare systems, thermal oxidizers, catalyst systems

    With over two decades of overcoming combustion and emissions challenges, UOP Callidus consistently leads the industry by setting the standards for maximum performance and minimum emissions. Burners that set the standards: Innovation and technology are the keys to UOP Callidus burners. For over two decades, ...

  • Callidus ultra-blue burner (CUBL)

    The UOP Callidus Ultra-Blue (CUBL) is rapidly becoming the preferred Ultra-low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas. The new design also increases ...

  • Callidus low NOx staged gas burner (CSGL)

    The UOP Callidus (CSGL) is rapidly becoming the preferred staged gas low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas.The new design also increases the tile ...

  • Responsive image Download Tracerco level system data sheet
  • Responsive image Get the right answer faster
  • Responsive image Extensive tray portfolio
  • Responsive image Advanced sulphur analysis in hydrocarbons
  • Responsive image BASF Refinery Solutions on LinkedIn
  • Responsive image Axens on Linkedin
  • Responsive image Capture more value from every barrel
  • Responsive image FCC catalysts & additives
  • Responsive image Designing deepcut vacuum units that work
  • Responsive image Galexia™ hydroprocessing platform