You are currently viewing: Literature



Moving gamma scanning forward – quantitative analysis of tray capacity

Improving process operating margins can include maximising production of higher value products and/or minimising production costs. Process plants depend heavily on fractionation towers to produce products meeting customer specifications. Tower gamma scanning is well established in the process industries as a qualitative tool to help troubleshoot fractionation towers. Using new measurement detector technology and innovative analysis of gamma scanning data Tracerco is now able to offer quantitative information about the useful capacity of fractionation towers, both trayed and packed.

Trayed Towers - FrothView™
Up to now there are few practiced methods for measuring a liquid or froth level on a tray from gamma scan data. However; no matter the practitioner the conventional methods allocate a tray’s aerated liquid height somewhere in the middle of the layer. This method is adequate for diagnosing tray damage – whether a tray is capable of holding liquid or not. But beyond this determination, conventional tray liquid level measurement has no correlation to any other operating variable. Additionally, to characterise remaining tray space above this position that is seen to be denser than “clear vapour”, subjective terms such as slight entrainment, moderate entrainment or heavy entrainment are typically used. This method is illustrated in Figure 1a.

For trayed towers a new methodology, FrothView™, has been developed and tested whereby the total froth height on a tray is measured from gamma scan data using new detector technology and software interpretation. This method is shown in Figure 1b on page 2. Dividing the total froth height by the tray space provides the percentage of tray space occupied by tray froth. This “% tray space” has been shown to correlate very well with % flood, thus is a way of using a field measurement and directly relating this to specific tray design criteria to determine the useful capacity of operating trays.

The “inspiration” for the development of FrothView™ technology was taken from a presentation given by Mike Resetarits, Technical Director of Fractionation Research Inc. (FRI) at the 2011 A.I.Ch.E. Spring Meeting titled “On Distillation Tray Entrainment” (1). Tracerco determined from the presentation that the degree of entrainment is very difficult to quantify. If it cannot be reliably quantified then it is very difficult to use entrainment in tray correlations particularly to measure tray capacity. Most, if not all, tray capacity correlations use a calculated tray froth height or level. An article written by Mark Harrison with Eastman Chemical explores using tray froth heights to measure tray capacity. (2) Mr. Harrison proposed a graphical method for measuring tray froth heights. However it is unclear to what extent Mr. Harrison was able to test and utilise this method.

During the past couple of years Tracerco has had opportunities to scan a trayed pilot plant tower under varying operating conditions, from weeping to flooding. One objective of this study was to find a method to quantify the scan results to provide a more objective diagnosis of the tray’s hydraulic condition.

View More

Moving gamma scanning forward – quantitative analysis of tray capacity

Improving process operating margins can include maximising production of higher value products and/or minimising production costs. Process plants depend heavily on fractionation towers to produce products meeting customer specifications. Tower gamma scanning is well established in the process industries ...


FCC stripper - distribution studies

A Tracerco Diagnostics™ Distribution study can be performed to identify catalyst and vapor distribution in the stripper. Uniform distribution of catalyst and steam in the stripper is critical to achieve high stripping efficiency (less carry-down of the hydrocarbon products from reactor to regenerator). ...


Exchanger leak testing - chemical tracers

Tracerco has been at the forefront of the development of online leak detection for the last 40 years. The method allows the detection of leaks as small as 0.5%. However, customer demands to measure smaller leaks affecting product quality, has prompted extensive research to develop alternative online ...


Tracerco Diagnostics™

Providing real time measurement technologies to assist with critical decision making. Tracerco Scanning Services TRU-SCAN® Application. Do you have problems with the operation of your stripper/absorber or fractionation tower? Is this limiting production? Do you want to reduce your operating costs? ...


Tracerco Diagnostics™ FCCU Study

The Fluidized Catalytic Cracking Unit (FCCU) is the economic heart of a modern refinery. Even small increases in its yield can bring about significant overall gains in productivity and revenue. Tracerco is a world leading industrial technology company providing unique and specialized detection, diagnostic ...


Measurement instruments and servicing

Our Measurement Instruments business designs and manufactures a range of bespoke, low maintenance, high reliability instruments providing operators with real time measurements and in-situ visualisation. Our experienced team technically supports an extensive range of nucleonic measurement instruments ...


Making desalter vessels transparent to optimise crude processing

Making Desalter Vessels Transparent to Optimise Crude Processing... whatever the blend. To improve margins, refiners continuously look to optimise feedstock blends. Variability can bring significant operational challenges during the refining process that must be overcome. One critical need is the efficient ...


PackView™ - quantitative analysis of packing mal-distribution

The last issue of Tracerco Insight (Vol 6 Ed 1) featured our patent pending FrothView™ technology illustrating how using Tracerco’s new measurement detector technology and analysis of gamma scan data provides quantitative information about the useful capacity of trayed towers. In this article ...


Making the invisible visible

In FCC Units (Fluidised Catalyst Cracking Units) the atmospheric residue from the distillation is cracked to LPG, naptha and other components. This sometimes leads to “invisible” deposits inside the Riser. This article features Tracerco’s ThruVision™ scans to illustrate how the ...


Tracerco Profiler™ HMI

A Windows based application offering dynamic displays, diagnostics, trending, control and historical logging. The Profiler™HMI, is a ready-made graphical user interface that provides clear insight into your separation process while enabling efficient operation and control of the Profiler™GPS ...