logo

Back

Number: 22

Display:

  • Advanced flare and flare system designs

    UOP Callidus prides itself in providing economical high destruction efficiency, high smokeless, low noise, low radiation flares for a broad range of flare applications. Through our engineering expertise, manufacturing capabilities and worldwide service, UOP Callidus has become a leading provider of flare technology. The UOP Callidus team has hundreds of years of combined flare design experience and has been involved in the fabrication, installation, and startup of thousands of ...

  • Callidus low NOx staged gas burner (CSGL)

    The UOP Callidus (CSGL) is rapidly becoming the preferred staged gas low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas.The new design also increases the tile exit velocity which enhances fuel/flue gas/air mixing, providing a shorter, “stiffer” flame as compared to other next generation Ultra-low NOx burner designs. Using ...

  • Callidus ultra-blue burner (CUBL)

    The UOP Callidus Ultra-Blue (CUBL) is rapidly becoming the preferred Ultra-low NOx process burner. An innovative design has been employed which increases the burner’s stability and allows for optimal performance on typical refinery fuel gases and 100% natural gas. The new design also increases the tile exit velocity which enhances fuel/flue gas/air mixing, providing a shorter, “stiffer” flame as compared to other next generation Ultra-low NOx burner designs. Using ...

  • HexWall™/ Vectorwall™ case study

    Furnace baffles – a long history of problems. Sulphuric acid plant furnace baffles historically are labor intensive, expensive to install, require long shut downs for refractory cure times, are susceptible to cracking, and have a poor reputation for collapsing due to their inherent mechanical instability. This archaic product has been the industry norm for over 100 years. No more… An innovative response MECS, Inc. (MECS) has collaborated with Blasch Precision ...

  • ITW Online Cleaning

    Will revolutionize turnaround operations and operational excellence by optimizing: productivity, operability, safety health and environment, reliability, product quality, energy efficiency, CO2 SOX NOX VOC emissions, maintenance and repair and operational requirements. An entire Unit can be ITW Online Cleaned in as low as 24 hours on an oil-to-oil basis, including all the equipment and not only the relevant one, without the need of opening it. ITW Online Cleaning a Unit in ...

  • John Zink Hamworthy Combustion Corporate Fact Sheet

    Our customers produce the world’s energy, chemicals, and plastics, and eliminate harmful emissions from the air, water, and soil. We help them operate in a cleaner, safer and more economical way. Leadership Like No Other John Zink Hamworthy Combustion (JZHC) is a global leader in emissions-control and clean-air combustion systems. We back every product with decades of proven performance, unrivalled research and development capabilities, and expert service and support. Our ...

  • John Zink Hamworthy Combustion equipment rentals

    Everything You Need When You Need It Most. When the unexpected arises, you want immediate solutions, fast. John Zink Hamworthy Combustion offers the engineering and technical support, expert installation, and a wide variety of combustion rental equipment to get your operation back online. Our portable combustion systems are ideal for temporary vapor control at loading terminals, tank degassing and pipeline blowdown applications. We also maintain a large inventory of flare equipment ...

  • John Zink Hamworthy Combustion Preventative Maintenance Program

    Optimize Performance, Minimize Downtime. A regularly scheduled and properly performed Preventative Maintenance (PM) program, we can help you reduce unplanned downtime, avoid possible emergency callouts, ensure maximum availability of your equipment and extend equipment life under optimum process conditions. Our program goal is to provide you with the maximum possible service life and performance from your equipment. Our technicians are trained in the operation of all combustion ...

  • MECS® - Thermo Z™ the optimum–H™ system

    The ideal design solution for MECS–Thermo Z gas to gas heat exchangers to eliminate cold end corrosion. When gas temperatures and dew point conditions require maximum corrosion protection from cold spots, the Optimum-h™ System can provide a value engineered approach to raising the minimum metal temperature in near condensing applications and allow for less expensive materials of construction. Unlike most other attempts to reduce cold spots in heat exchangers, the Optimum-h™ ...

  • MECS® HexWall™ Baffles

    For sulfuric acid plant sulfur burners and spent Acid recovery furnaces. Interlocking hexagonal ceramic blocks for fast installation and superior structural stability. MECS® HexWall™ is a versatile, mechanically stable system consisting of a series of stackable six-sided blocks incorporating alternating tabs and slots on each side that are designed to ensure the blocks are positively locked together at installation. MECS® HexWall™ is oered in a highly creep ...

  • MECS® Sulfox™ process

    The SULFOX™ process is based on the thermal and catalytic conversion of sulphur-bearing compounds into sulphuric acid. Depending on the feed gas conditions, customised plant types are offered. For low concentrations, the feed gas is preheated to the required catalyst inlet temperature by the glass tube heat exchanger of the condensation column and an additional gas preheater from the heat recovery system. An additional direct fired preheater is used for start-up and very ...

  • MECS® sulfuric acid and environmental technologies

    Is the leading provider of proprietary process technology, speciality products and technical services to the global sulfuric acid industry. MECS® has provided best-in-class sulfuric acid plant processes, clean technologies, and specialty products to a wide distribution of industries for over 80 years. Our proprietary solutions are engineered to perform and built to last. MECS® is the global leader in sulfuric acid plant design and technology licensing for the phosphate ...

  • MECS®–Thermo Z™ welded plate heat exchangers

    Plant engineers in the know choose MECS®–THERMO Z™ for maximum waste heat recovery and the best delivered value. MECS®–ThermoZ™ is a highly efficient heat exchanger suitable for many industrial processes where gas temperatures may be up to 1500°F (816°C). It is inherently compact in size and weight which makes installation andfield set up much simpler than conventional heat exchangers. Since MECS®–ThermoZ™ has no moving ...

  • On-line heater and boiler chemical cleaning technology

    GTC’s fired heater cleaning solves common process feed heater problems. With rising pressure to reduce energy costs, GTC’s advanced fired heater/boiler chemical cleaning technology is an effective way to improve heater efficiency without shutting down plant operations. Our technology is designed to quickly remove deposits such as slag and other fouling materials that build up over time on tube fire side surfaces. Fouling in the convection section caused by condensed ...

  • Process heater burners, flare systems, thermal oxidizers, catalyst systems

    With over two decades of overcoming combustion and emissions challenges, UOP Callidus consistently leads the industry by setting the standards for maximum performance and minimum emissions. Burners that set the standards: Innovation and technology are the keys to UOP Callidus burners. For over two decades, our team has been on the leading edge in designing burner equipment. The burner design group has worked in cooperation with our customers to develop the technology and solutions ...

  • Reducing flare emissions

    UOP Callidus Technologies by Honeywell, a leading provider of flare systems, is pleased to offer our Flare Gas Recovery (FGR) technology in conjunction with its broad range of flare system capabilities. With a heritage of technical expertise, UOP Callidus prides itself in providing economical flares with high destruction efficiency, high smokeless capacity, low noise, and low radiation for a broad range of flare applications. The UOP Callidus team has hundreds of years of combined ...

  • Selective catalytic reduction and catalytic oxidation

    Reducing NOx and CO levels for simple-cycle systems, heat recovery steam generators, package boilers, and thermal oxidizers. UOP Callidus delivers technically superior emission control products and services to the power, petrochemical, and refining industries. Our Selective Catalytic Reduction (SCR) products utilize state of the art CFD modeling, engineering, and fabrication techniques. We offer total solutions for the power industry: SCR, CEMS, DARS and DCS. We also offer ...

  • SERVOTOUGH FlueGasExact 2700

    High performance combustion process analysis of oxygen and combustibles, designed for use in the most hazardous and challenging location. Armed with an integral sampling system custom-designed for operation in some of the hottest and most extreme combustion environments, the FluegasExact is the analyzer of choice for measuring oxygen and combustibles in the most demanding hydrocarbon processing and power generation applications.

  • The UOP Callidus scepter pilot and scepter model P1 portable igniter

    Meeting the refining and petrochemical challenge. As a result of the efforts of UOP Callidus engineers and with input from our customers, the Scepter Pilot was developed. The new pilot system was designed at the world-class industrial scale, UOP Callidus Research and Test Facility, and only released after three years of extensive evaluation. The Scepter Pilot is available in two models to meet the demands of industry. UOP Callidus Scepter Pilot is available in two models, the ...

  • Thermal oxidizer systems

    UOP Callidus is an industry leader in environmental and combustion technology. We have provided incinerators for a wide variety of gas and liquid wastes including inorganic particulate, various acids and hard-to-burn organic compounds. Our experience extends to development and implementation of Thermal Oxidizer systems for Fume, Tail Gas, Halogenated Waste, Bound Nitrogen, Catalytic Oxidizers and Downfired Incinerators including units with ratings of over 400 MM BTU/hr. All UOP ...

  • UOP Callidus installation services

    Installation Services: UOP Callidus offers turnkey installation and aftermarket support for our products around the world. Our goal is to provide first class service from professionals who have years of experience with our equipment and understand how it should be installed and operated to obtain the highest quality and efficiency. Our services include: • Installation • Guy Wire Tensioning • Retractable Systems • Supervision and Inspections • Commissioning ...

  • UOP Callidus Jade burner

    The Jade Burner from UOP Callidus is the first ultra-low NOx Tail Gas Thermal Oxidizer Burner designed and built specifically to deliver ultra-low Nox emissions with no special physical or operational requirements. In many cases, incorporating the Jade burner into a thermal oxidizer results in the lowest nitrous oxides (NOx) and carbon monoxide (CO) emissions a thermal oxidizer can produce. The purpose of a thermal oxidizer is to combust (oxidize) various organic or inorganic ...

  • Responsive image Process flares
  • Responsive image NAPCON games transform the way we train
  • Responsive image PTQ free subscription
  • Responsive image Extensive tray portfolio
  • Responsive image Processing heavy canadian crude
  • Responsive image Ejector vacuum systems
  • Responsive image Ball valves for pipelines and refineries
  • Responsive image FCC catalysts & additives
  • Responsive image Compressors for demanding applications
  • Responsive image FCC online diagnostic services for FCCU