logo

You are currently viewing: Literature

Back

Number: 106

Display:

LITERATURE

  • Herzog OptiFlash® Tag & Abel

    Easy, safe and accurate flash point determination. PAC’s Herzog OptiFlash® is the new benchmark in flash point analysis, fully designed to meet today’s expectations on user convenience, quality and safety compliance. The Optiflash® accurately detects flashpoint from -30°C to 120°C for petroleum products, alcohols, solvents, chemicals, food and beverages. The OptiFlash® is fully compliant with leading global standards.

  • Hydrogen as a renewable fuel

    Governments and businesses are increasingly committed to steep decarbonization targets, establishing hydrogen as a key component in the energy transition. As of this writing, McKinsey reports that 64 countries, representing 89% of global CO2 emissions, have made net-zero pledges, while financial institutions and private sector enterprises also continue to increase their decarbonization aspirations. Going forward, the energy mix is projected to shift toward clean electricity, complemented ...

  • Hyperion™

    Bulk level and density measurement. Designed using innovative scintillator-based technology, Hyperion™ is a non-contact, no moving parts measurement solution that provides accurate and extremely reliable bulk level and density measurements. This enables operators in the oil, gas, petrochemical, refining, pulp and paper and mining industries to solve the most challenging process measurement and control problems. Key features - Self-diagnostics - Repeatable and accurate measurements - ...

  • Improve precision for SIMDIS using ‘light solvent optimized’ agilent model 7693 automatedliquid sampler

    There are many factors affecting GC data precision. Sample introduction parameters are amongst the most critical. A factor easily overlooked is the temperature of the sample and its variances over time in relation to the solvent used. Environmental conditions and heat patterns around the ALS can easily become major contributing factors to performance when very light solvents are used. In Simulated Distillation analyses, heated zones are typically ramped to temperatures above ...

  • InlineSENS - Density Measuring Cell

    Density and concentration measurement with low energy gamma radiation. The InlineSENS combines both a radiation source and scintillation detector in one device. Its use of low-energy gamma radiation from an Am-241 or Cm-244 source provides for strong responses to even the slightest change in product composition , with extremely low dose rates. Features for high demands The isotope Am-241 or Cm-244 is used as the radiation source. The advantage: Am-241 and Cm-244 have very ...

  • Insight through instrumentation

    Get the measure of your process. Tracerco offers a range of advanced nucleonic instrumentation including products for level, density, phase and interface measurement. Our unique instruments provide nonintrusive, real-time solutions for downstream petrochemical, upstream oil and gas and subsea operations, bringing clarity and understanding to customers’ assets. With enhanced self-diagnostics and low maintenance costs, our instrumentation boasts unrivalled safety, stability, accuracy ...

  • Integrated solutions for CEMS

    Gas analysis plays an essential role in cleaner industrial operations for plants and refineries, helping to ensure more efficient processes, support the safe removal of pollutants, and monitoring the harmful emissions to the atmosphere. A high-performance continuous emissions monitoring system (CEMS) is crucial to the safety and efficiency of a wide range of industrial processes, and an essential part of clean air strategies. CEMS installations must offer the highest sensitivity ...

  • Interface and Multiphase Level Measurement

    Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different product layers inside the vessel. In this way the characteristic of the emulsion layer can be monitored as well. The measurements are primarily applied in chemical plants and in the oil & ...

  • Interface measurement in desalters

    Interface measurements in desalters are often regarded as not being very critical, even though every drop of oil, to be refined, passes through the desalter. As refineries try to maximize their margins, so-called opportunity crudes are often used. These crude oils generally contain increased levels of sulphur, oil sands, bitumen, heavy oils and oils with high TAN. This can lead to problems with the proper operation of the desalter. In addition, refineries are increasingly confronted ...

  • Jamesbury™ valve and actuator solutions

    Premium performance Jamesbury™ solutions offer improved process efficiency and safety on proven and value-driven designs. Jamesbury solutions combine a wide range of valves, valve automation solutions services that exceed customer expectations for performance, value and availability.

  • JFTOT® IV

    The worldwide recognized leader of jet fuel thermal oxidation testing. PAC’s Alcor JFTOT® is the globally recognized standard for jet fuel thermal oxidation testing with a worldwide installed base over 1000 instruments. With the Next Generation JFTOT IV PAC brings an industry leading product and adds enhanced safety features and simplified operational capabilities in a smaller, streamlined package that significantly increases operator productivity. The Alcor JFTOT IV ...

  • Lance Scope™ Hot inspection service

    Avoid Furnace Shut Down with Online Fired Heater Inspection. Is there an issue with your high temperature fixed equipment, but you can’t see the cause, or the exact site? We designed and developed Cetek’s Lancescope™ fired heater inspection tool for just this situation. It allows to undertake a high temperature furnace inspection to determine the scope of the problem, often avoiding an expensive shut down of the heater. Cetek’s Lancescope™ system provides real-time, ...

  • LB 350 - Online Moisture Analyzer

    Radiometric moisture analyser for representative and robust measurements on bulk material. The LB 350 is a moisture measurement system for real-time determination of the moisture content of a wide variety of different bulk materials such as: * Coke * Sinter mixture * Ore * Sand * Building material

  • Covering your streams with gas chromatography: Analytical technique and key applications

    Gas Chromatography is a critical part of any analytical lab in the refining process. It is such a standard that operators take for granted all the ways it is used. Join us as we will be touching on the importance of GC in the lab, what goes into selecting a unit, and three key applications seen in many labs: Refinery Gas Analysis, Group type Analysis with Reformulyzer pre-frac, and Simulated Distillation. In this webinar we will: - Give an overview of the importance of GC ...

  • Beyond processbook & PI vision: Exploring today’s industrial analytics tools

    In the Manufacturing 4.0 era, industrial organizations have more data at their fingertips than ever, offering the promise of higher production rates, more consistent quality, and reduced costs through data-driven strategies. Standing between many businesses and this promise of process optimization are questions surrounding the right tools to harness this data effectively – a choice complicated by the shifting status of longtime standard OSIsoft’s ProcessBook and PI Vision ...

  • New digital tools to improve operational profitability in refineries

    View this webinar to learn how you can leverage new digital tools as part of the Honeywell UOP upgraded PremierPLUS Performance Services offering to avoid unplanned downtime, optimize process performance, manage personnel changes, and reduce energy and emissions. The PremierPLUS Performance Services offering addresses these challenges and can improve operational profitability by an average of $1M to $5M per year. Attending this webinar will give you an overview of Honeywell ...

  • Fundamentals of Safe Liquid Grab Sampling

    Every day, grab (or spot) sampling systems allow oil, gas, and chemical companies around the world to simply and accurately determine the quality and composition of the fluids they process. In many cases, however, opportunities remain to improve the ease-of-use, safety, and maintenance requirements of these system by rethinking aspects of their design. In the case of panels that draw liquid samples into laboratory bottles, changes to valve assembly designs, specifically, can yield ...

  • Elemental Analysis for Refining and Petrochemicals

    Seamless Laboratory and Process Analysis for Total Sulfur and Nitrogen. As expected shifts to petrochemical and crude oil-to-chemicals (COTC) projects expand through 2050, the need for elemental analysis in refining and petrochemical continues to grow. Refiners must meet stringent requirements due to the increase of nitrogen and sulfur in the crude, requiring more focus on processing and control. Join us to learn about laboratory and process analysis for total sulfur and nitrogen. During ...

  • How grab sampling can help improve your plants safety

    While grab sampling can be a dangerous and hazardous process for both operators and their surrounding environment, too often safety takes a back seat to other day-to-day considerations. If this sounds familiar, tune into this sponsored webinar. It's your opportunity to focus on areas in your plant where safety is a concern and learn methods for ensuring sampling that is not only safe and effective, but also representative.   In this webinar, you'll examine hazards associated ...

  • CDU desalter processing with interface control

    In this webinar, you will find out how Tracerco’s advanced multi-phase nucleonic instrumentation can analyse desalter performance and improve crude blending capacity. Discover opportunities to: - Improve environmental impact, compliance and energy usage - Reduce unplanned trips and downtime - Optimise chemical dosing (demulsifiers/neutralisers) - Reduce overhead corrosion, as well as catalyst deactivation in FCC - Improve process control enabling data driven insights With ...

  • Best Practice: Screening and QC testing of petroleum products and fuels

    Screening and quality control of petroleum products and fuels can be a tedious and expensive process when performed utilizing traditional methods. Near-Infrared spectroscopy (NIRS) as described in ASTM Guidelines E1655, D8340, and D6122 is a much faster method providing results in just 30 seconds without any solvents and reagents needed. In fact, NIRS has  become the preferred method of numerous producers to quickly quantify key parameters in petrofuels and petrochemicals ...

  • Understanding alarm management standards

    Alarms are an essential layer of protection, enabling industrial facilities to avoid abnormal situations that may put people, the environment, and profits at risk. As such, numerous standards and guidelines exist that can assist organizations in designing, implementing and maintaining alarm systems that comply with regulations. ISA 18.2, EEMUA 191, IEC 62682, API 1167 — how should organizations select these standards and guidelines? How can they be put into practice? Join ...

  • The case for plant modernization and upgrades

    With a system that's outdated or showing signs of it, you are well aware of the risks of running your plant processes with aging hardware and software. Waiting to modernize will impact your cost of ownership due to shortages of critical parts and support, will increase risk of an unplanned production shutdown, and likely will have no incremental benefits. A well-designed modernization approach allows the opportunity to reduce system footprint and costs. Whether by eliminating ...

  • How to achieve operational excellence with safe and profitable operating windows

    Plant of the Future’ is making headway towards operational excellence using technologies that enable safe and efficient operations to improve your bottom line and reduce OPEX expenses. Operations Management provides the foundation needed to enable operations excellence. In this presentation, we’ll show you the tools we’ve designed to manage and control critical limits, shift handovers, and process deviations. You are going to learn: - How Honeywell Forge Operations ...

  • Learn how to build refinery models quickly and easily to support your LP model

    In this webinar we will present refinery modelling workflows, features and functionalities, which showcase Honeywell Forge Process Simulation’ refinery-wide flow sheeting capabilities. These capabilities span the beginning-to-end design, use, and exporting results of a refinery model.   First, attendees will see how easy is to create a model from scratch utilizing our Process Simulation 'drag & drop' refining reactor templates. Finally, we will showcase the product ...

  • Ensuring business continuity in industrial operations

    Join this webinar to discover the multiple areas in your organization where Honeywell Forge can help ensure the reliability, efficiency, and safety of your refining operations. We will explore cases from asset performance management and process optimization to remote worker performance and competency solutions.   The new normal is here to stay. Uncertainty is the new name of the game; however, resilience should also be a key player. How are you ensuring the reliability, ...

  • A layered approach to achieving plant-wide optimization goals

    Join this webinar to discover the multiple areas in your organization where Honeywell Forge can help ensure the reliability, efficiency, and safety of your refining operations. We will explore cases from asset performance management and process optimization to remote worker performance and competency solutions.   The new normal is here to stay. Uncertainty is the new name of the game; however, resilience should also be a key player. How are you ensuring the reliability, ...

  • Driving machine learning through fundamental machinery diagnostics

    Join Honeywell’s APM specialist, Ben Berwick, as he discusses how Honeywell leverages Asset Performance Management technology to recognize the earliest onset of rotating machinery issues. The rapid pace of predictive analytics, artificial intelligence and digital twins for industrial assets is proving revolutionary in how asset intensive organizations benefit from the actionable information provided by asset performance management (APM) software.  A key element in deriving ...

  • Simplify crude assay importing in UniSim design by utilizing H/CAMS

    Haverly H/CAMS is the industry leading assay crude management software with over 2000 assays. Honeywell's UniSim Design software links to Haverly H/CAMS via a COM interface and allows you to import proprietary assays with just a few clicks. This functionality increases engineering effectiveness, eliminates the need for manual data entry, and makes it easier to model crude storage facilities and refining processes. Presenters: Jagdish Rachh - Honeywell David Alexander - Haverly Moderator: Ken ...

  • Intelligently predict and prevent corrosion across your operations

    Learn how the fight against corrosion never stops - it is a fact of life every day across Oil & Gas, Refining and Pipeline operations, what-if you could have insight into real-time corrosion rates in your process? Honeywell Predict® Corrosion Suite provides the next generation of corrosion management solutions, intelligent software providing real time corrosion quantification. Unlike conventional corrosion management methods, unique prediction models are employed that ...

SPONSORS