You are currently viewing: Digital Magazines

Number: 83 Page:  «  1 2 [3] 4 5 6 7 »
  • ERTC 2017 Newspaper

    ERTC 2017 Newspaper


    Key steps for refiners ahead of IMO 2020 ... Q&A with Diomidis Stamoulis ... Maximising FCC performance and yields with catalyst innovations ... European refineries towards a sustainable world ... Precious metals catalyst: understanding the technology ... Process selection: a refinery study of FCC vs Gasolfin for naphtha cracking into propylene ... Creation of energy efficiency action plan for oil refinery with advanced energy analysis ... Renewable components in European refining companies ... Operating in the jungle of renewables ... Online Cleaning technology applied to a major European refinery ... Accurate, real-time H2S measurement achieved with in-line analyser ... High-efficiency filtration extends SRU cycle length ... High-performance catalysts and technology in action.

  • Q4 2017

    Q4 2017


    The future for hydrocracking: part 1 --- Converting two columns into one --- Catalyst technologies for improved FCC yields --- Meeting emission targets with potential savings --- Debottlenecking an FCC gas concentration unit --- High efficiency coalescers for gas processing operations --- Plant optimisation: leveraging data analytics and modelling --- New technologies for operator training --- Oxidation catalysts for VOC reduction --- Meeting low sulphur diesel challenges --- Preventing ammonium salt fouling and corrosion --- Wastewater treatment for challenging crude --- Oil recovery from tank sludge --- Processing schemes for shale gas liquids recovery --- Full conversion of bitumen.

  • Revamps 2017

    Revamps 2017


    Advances in benchmarking capital project costs ... Silencing hammering in a condenser system ... Controlling contaminants in vacuum gasoil ... Planning for a turnaround ... Advances in HF acid alkylation conversion and expansion ... Upgrading an FCC unit ... Retrofitting crude furnace burners.

  • Q3 2017

    Q3 2017


    Troubleshooting crude column constraints --- Olefins and butanes to gasoline --- Optimising the health of rotating equipment --- APC in a mild hydrocracker fractionator --- Crude fingerprinting and predictive analytics --- Higher margin from the bottom of the barrel --- Best practice desalting Part 1: crude flexibility window --- Leveraging  hydrocracking to upgrade low value streams --- FCC product fractionation for maximum LCO --- Modelling the processing of gasifier feed --- Improving FCC unit profitability --- Controlling the hydrocarbon dew point of pipeline gas --- Modelling catalytic naphtha reforming,

  • Gas 2017

    Gas 2017


    Optimise the route to emissions compliance --- SO2 breakthrough under the microscope --- Flexible thinking for capital projects --- Simplifying hydrogen production --- The impact of side reactions in sulphur recovery unit design --- Improve sulphur plant performance through simulation --- Removing liquid-phase contaminants from hydrocarbon liquids.

  • Q2 2017

    Q2 2017


    Tier 3 gasoline from tight oil crudes ... Managing petcoke slurry ... Handling mercury in gas processing plants ... A broader view to improve energy efficiency ... Exchanger cleaning contest: chemicals vs jetting ... Membrane bioreactors for wastewater treatment ... On-demand propylene from naphtha ... Upgrading CO2 removal systems ... Revamping crude towers to meet bitumen specifications ... Model predictive control of a distillation unit ... Improving sulphur plant performance ... Building robust hydroprocessing operations ... Building a refinery monitoring system ... Stopping corrosion on in-service structures.

  • Catalysis 2017

    Catalysis 2017


    2017 Catalysis Q&A ... Increased steam methane reformer throughput ... Optimising middle distillate production in a hydrocracker ... Lessons from FCC history ... Designing and engineering catalysts for hydrotreating ... Catalysts for higher middle distillate yields ... Catalyst filling in a fixed bed tubular reactor ...