You are currently viewing: Literature


Number: 458 Page:  [1] 2 3 4 5 »
Display: 

Literature

Advanced rental flare technology

Rental Services: The UOP Callidus Rental Group has the unique ability to bypass the normal work flow with our own project design and management team to fulfill all of our customer’s rental needs. If it’s not in our vast inventory of existing parts and equipment, we can create ...


Gain 5-10% efficiency with this simple 4-pass tray revamp

The design of 4-pass trays can be complex. It not only requires a close evaluation of the mechanical design but also the process response to that design at various flow rates. The balancing of the fluid flows across the tray can have a substantial effect on the tray performance, namely ...


DuraZOOM™ - industry-leading olefin and octane enhancement

DuraZOOM additive is the latest in a long line of light olefins and octane enhancers manufactured by Albemarle. ZSM-5 additives were developed by Mobil Oil Corporation and first used in 1983 as octane enhancers necessitated by the phasing out of tetraethyl lead. Since then, their use has ...


Channel baffles: improving efficiency on trays with low vapor loading

Sour water strippers, wastewater benzene strippers, or any other column that operates with low vapor rates often have active areas that are easily oversized for the actual operating vapor traffic. For optimum tray efficiency, good contacting of the liquid flowing across the tray deck with ...


Gasification – converting the bottom of the barrel into valuable products

Traditionally, crude-oil residues have been sold as marine bunker fuel or used on-site as furnace fuel. However, with changing legislation, refineries are under pressure to reduce both their emissions and the sulphur content of their products; in addition, the market for fuel oil is shrinking.   The ...


Level Switch - Mini-Switch LB 471

Application. The BERTHOLD level switch is used in all branches of industry, including the food industry. This measurement system is applicable where one or more alarm levels of liquids or bulk solids have to be monitored. In fact, the BERTHOLD level switch is suitable for installation ...


Cryogenic air separation

Design and construction of air separation plants is part of Linde’s traditional scope of activities, which led to the establishment of Linde’s Engineering Division at the turn of the 19th century. In 1902, the start-up of the world’s first air separation plant initiated ...


Improve contaminant metals flushing with TITAN™

The escalating price of rare earth in fluid cracking catalyst sparked increased demand from refiners for equilibrium catalyst (Ecat) as a means to control expenses. During this same period, the available supply of high quality, low metals Ecat had decreased. In response to the shrinking ...


Natural gas processing plants

Natural gas is valuable both as a clean source of energy and as a chemical feedstock. Before reaching the customer, it has to pass several processing steps. These steps are partly necessary to be able to transport the gas over long distances and partly necessary for the recovery of valuable ...


Fractional crystallization

Crystallization is one of the most powerful purification methods available in process engineering. Fractional crystallization is a stagewise separation technique that relies upon liquid-solid phase transition and enables multicomponent mixtures to be split into narrow fractions, ultimately ...


UOP Callidus Jade burner

The Jade Burner from UOP Callidus is the first ultra-low NOx Tail Gas Thermal Oxidizer Burner designed and built specifically to deliver ultra-low Nox emissions with no special physical or operational requirements. In many cases, incorporating the Jade burner into a thermal oxidizer results ...


Burckhardt Valve Service

Reduce operating costs of all your reciprocating compressors. For best compressor performance get a complete solution from the OEM. Burckhardt Compression has its own, leading valve technology since 1880. Experience has been gained for a wide field of applications. Valves are a key factor ...


GT-Styrene® a cost-effective process for recovering styrene

In an effort to improve the production economics of naphtha cracking plants, operators must consider the recovery of valuable components from pyrolysis gasoline (pygas) over blending into the gasoline. Styrene is one such component that has far more value as a petrochemical product than ...


Petrochemical processing

About 80% of all petrochemicals are derived from products of ethylene plants, which are the heart of petrochemical complexes. Today’s modern ethylene plants are a complex network of more than 300 individual units, for thermal cracking, cracked gas compression and physical scrubbing, ...


STRATCO® Alkylation innovations for grassroots applications

A commitment to innovation research and development. DuPont recognizes that continued improvement of the STRATCO® alkylation technology is critical to our customers’ success. As such, DuPont has a dedicated team of scientists and engineers focused on alkylation R&D at the ...


Process gas compressors API 618

Burckhardt Compression’s Process Gas Compressor represents highest availability and a long meantime between overhaul thanks to an optimized compressor sizing and selection, also in regards to high quality compressor components and valves. Burckhardt Compression provides a robust ...


MECS® - Thermo Z™ the optimum–H™ system

The ideal design solution for MECS–Thermo Z gas to gas heat exchangers to eliminate cold end corrosion. When gas temperatures and dew point conditions require maximum corrosion protection from cold spots, the Optimum-h™ System can provide a value engineered approach to raising ...


Advanced flare and flare system designs

UOP Callidus prides itself in providing economical high destruction efficiency, high smokeless, low noise, low radiation flares for a broad range of flare applications. Through our engineering expertise, manufacturing capabilities and worldwide service, UOP Callidus has become a leading ...


Precious metals recovery and refining for global industry

Sabin Metal Corporation is the largest domestically owned, independent precious metals refiner in North America, serving a worldwide customer base. We recover PGMs (platinum, palladium, ruthenium, rhodium), rhenium, gold, silver, and other precious metals from virtually every source and ...


MECS® sulfuric acid and environmental technologies

Is the leading provider of proprietary process technology, speciality products and technical services to the global sulfuric acid industry. MECS® has provided best-in-class sulfuric acid plant processes, clean technologies, and specialty products to a wide distribution of industries ...


Sindie on-the-go

Plug-It-In & Measure. Results with One Touch.Unrivaled Precision. The Sindie OTG is a portable sulfur analyzer and provides reliable quality results from ULSD and gasoline to marine fuels and crudes. The analyzer is suitable for operating in-the-field, on-board marine environments ...


Trays for any application

Sulzer Chemtech offers the largest tray portfolio on the market. Whatever the requirements, we have the right tray! Continuous innovations and improvements are: • First movable valve • First fixed valve • First customer tray design program • Use of push valves on commercial ...


FCC additive technologies

BASF offers a complete range of FCC additives to meet refiners’ environmental and performance requirements. In response to increasing concerns about the environment and the global drive for ever-tightening emissions regulations, BASF has developed, and continuously refines, an innovative ...


ERTC 2019 advisory board meeting report

In March 2019, the WRA hosted the ERTC Advisory Board meeting at the Hotel Bristol, Warsaw. Chaired by Tracy Ellerington, Director Europe & Russia Operations at Solomon Associates our expert participants shared their thoughts on Europe’s downstream status and the challenges that ...


Myth of the 1000°F vacuum unit cutpoint

Canadian Synbit and Dilbit crudes will come to make-up a substantial fraction of feedstocks to North American refineries. Today, however, for the most part refiners both north and south of the 40° parallel seem to be unaware of the extreme challenges this change will present. To run ...


S, Ni, V, and Fe analysis of crude oil using HDXRF®

Test methods for measuring sulfur content, like ASTM D4294 and ISO 8754, have become critical for assessing the value of crude oil. The blending of crude oils from different sources has become more commonplace within the industry to meet specifications for the classification of sweet crude ...


It’s time to give your reactor some HELPsc™

Excessive pressure drop build-up issues in hydroprocessing reactors are often keeping units from delivering maximum value. Refiners are forced to perform premature shutdowns for costly catalyst skimming operations resulting in lost profit. Topsoe’s High-Efficiency Liquid Phase ...


Three cost effective ways to strengthen trays against uplift

Several common operating conditions cause tray damage, including high liquid levels, free water flashing at the bottom of the column, and excessive pressure drop. The result can be an expensive shutdown causing lost production and profit. Increasing tray thickness can be a first approach ...


Get the best from your compressor upgrade and revamp

How’s your compressor running? How should it run? How could it run? The reliability, efficiency, and environmental soundness of compressors dictate the cost-effectiveness and dependability of entire plants. As a specialist in equipping reciprocating compressors with the latest performance-determining ...


MECS® Excalibur™ auto lancing systems

Thee MECS® auto lance system was developed to automatically lance new sulphuric acid re tube boilers while they're in service, cleaning fire tube boilers as efficiently as manual lancing. The MECS® Excalibur™ sequentially cleans all re tubes by opening the shutter tube. Thee ...


FCC technical support, industry-leading service

Grace technical service engineers regularly visit refineries to review unit operating data, evaluate catalyst management and unit performance, as well as provide specific recommendations to optimise unit operation. Grace can provide expert advice on operational problems concerned with ...


Trust BASF’s commitment to technical services

BASF’s commitment to innovation is in tune with the everchanging market and needs of our customer base. Our product and service model allows our technical representatives to build close relationships at their customers’ sites to deliver timely, proactive solutions and services. ...


SERVOFLEX Micro i.s. 5100

Intrinsically safe analyzer measuring O2, CO or CO2. High performance oxygen designed for the measurement of toxic and flammable gas samples, the intrinsically safe Micro i.s 5100 is a unique analyzer certified to Zone 0 and Zone 1, and suitable for measuring percent levels of O2, CO or ...


Advanced sulfur analysis with HDXRF

Petra is powered by High Definition X-Ray Fluorescence (HDXRF®) technology: an elemental analysis technique offering significantly enhanced detection performance over traditional XRF technology. This technique applies state-of-the-art monochromating and focusing optics, enabling dramatically ...


Continuous level - Non-contacting measurement

Non-contacting measurement technology by Berthold. The level measurement technology by Berthold is used in a variety of industrial sectors – ranging from the chemical to the waste water industry. It is suitable for measuring ranges of just a few millimetres up to several metres. ...


Operating a fouled process unit? What is it costing you?

ITW Online Cleaning Technology, applied proactively during a run, restores unit performance to near start of run conditions in as low as 24 hours oil-to-oil without the need for opening equipment. By utilizing ITW’s patented asphaltene stabilization and/or polymer modification technologies, ...


IsoTherming® Hydroprocessing technology

Growing global demand for transportation fuel continues to drive refiners toward operations that maximize hydroprocessing capacity and capability either through unit debottlenecks or new unit construction. More stringent environmental regulations and the processing of cost-advantaged sour ...


BCMT™-500 and BCMT-500-LRT

Too often profitability is lost because refiners lack adequate accessibility and bottoms cracking power in their catalyst. Albemarle has developed BCMT-500 additive, which features high accessibility and provides powerful functional bottoms conversion sites. BCMT‑500 delivers many pre-cracking ...


PackView™ - quantitative analysis of packing mal-distribution

The last issue of Tracerco Insight (Vol 6 Ed 1) featured our patent pending FrothView™ technology illustrating how using Tracerco’s new measurement detector technology and analysis of gamma scan data provides quantitative information about the useful capacity of trayed towers. ...


Ethylene

Lummus Technology's proprietary ethylene process is the most widely applied process for the production of polymer-grade ethylene and propylene. The process is noted for its performance, including product yield and energy efficiency; low investment cost; and operating reliability. Plant ...


Intelligently predict and prevent corrosion across your operations

Learn how the fight against corrosion never stops - it is a fact of life every day across Oil & Gas, Refining and Pipeline operations, what-if you could have insight into real-time corrosion rates in your process?  Honeywell Predict® Corrosion Suite provides the next ...


From hydrogen production to sulphur recovery - let ceramics pave the way

Learn how to boost the reliability and performance of your hydrogen production and sulphur recovery plants through the deployment of Blasch’s proven ceramic systems. Benefits include: • Higher plant reliability and much longer run-lengths • 60 -90% faster installation ...