ARTICLES
-
Heat recovery from corrosive flue gas
Apr-2015
For improvements to energy efficiency in the petrochemical industry, waste heat recovery from corrosive flue gas is the most cost effective source to ...
-
Energy-efficient vacuum systems
Apr-2013
Case analysis of the techniques available to reduce energy consumption in vacuum systems reveals the potential for cost savings
-
Real-time refinery energy management
Oct-2009
An online model installed at Repsol Cartagena refinery enables optimal balance between internal energy production and demand
-
Energy conservation in a crude unit
Feb-2016
Online cleaning of a CDU/VDU heat exchanger network saved on time, energy and environmental impact.
-
Designing a divided wall column
Mar-2016
A refiner plans the application of divided wall column technology for greater energy efficiency in the distillation of multi-component reformate
-
High performance trays for a fractionator in an aromatics plant
May-2015
Distillation is a very important separation technology in refineries and downstream chemical processing. Mass transfer internals in distillation columns ...
-
Assessing the impact of carbon pricing on refinery profitability
Apr-2012
The carbon cost to the European refining industry arising from EU policy will depend on the carbon price and on the refinery’s carbon footprint
-
Apr-2011
An integrated energy management system supports improvements to a refinery’s performance in energy consumption and emissions control
-
Towards a zero (net) carbon refinery
Jan-2013
Review of options for refiners to reduce the carbon emissions from their refineries. The technologies already exist to develop a refinery that has zero ...
-
Can refiners afford carbon capture?
Jan-2010
CCS is not widely considered an economical way of reducing refiners’ carbon footprints, but case studies indicate great variation in the cost of imp ...
-
Improved distillation efficiency
Dec-2016
Dividing wall column technology applied to a xylenes separation project delivered superior energy efficiency compared to a two-column arrangement.
-
New roles for FCCU: carbon capture unit and coke gasifier
Jan-2009
Environmental and energy security concerns may evoke new roles for the FCCU in addition to the production of liquid fuels and light olefins. Gasification ...
-
Energy recovery with compact heat exchangers
Jan-2012
Compact heat exchangers are used for heat recovery applications where high efficiency is vital, space constraints apply, or exotic materials are requi ...
-
Optimisation of energy consumption
Apr-2015
The true values of fuel, power and steam costs are needed for reliable estimation of energy saving projects
-
Dealing with desalter cleaning challenges
Aug-2016
How to overcome lengthy and potentially dangerous challenges when cleaning a crude unit desalter.
-
A refinery’s journey to energy efficiency
Mar-2016
Identifying a series of areas for improvement transformed the energy performance of a refinery with a 60-year history
-
Energy savings in preheat trains with preflash
Jun-2016
An eastern European refinery combined pinch technology and process simulation to achieve the most cost effective energy savings
-
Process flow determines coker heater performance
Jun-2018
Uniform tube metal temperature resulting from a change in process flow enhances the run length of a delayed coker heater.
-
Energy management: raising profitability, reducing CO2 emissions
Oct-2010
Case studies show how lower energy demand via revamps and improved maintenance can save money and abate CO2 emissions in refinery operations
-
Business value of hydrocarbon production accounting
Jan-2015
The gains that a refiner made by implementing an enterprise-wide hydrocarbon accounting system were both financial and cultural
-
Retrofitting crude furnace burners
Jan-2018
A burner retrofit has delivered more robust operation with reduced NOx emissions from a crude process furnace
-
Optimise the route to emissions compliance
Aug-2017
Increasingly stringent SO2 emission regulations may demand smart and cost-effective alternatives to generic amine based tail gas treating units.
-
Improved heat recovery from a hydrotreater
Apr-2012
A Russian refinery aimed to reduce the load on a hydrotreater’s fired heater by increasing the performance of the feed/effluent exchanger
-
Apr-2009
Major opportunities for energy efficiency and reduction of GHG emissions within a refinery/petrochemical complex are identified. Work process methodology ...
-
Best practice in energy efficiency
Apr-2015
Energy management software tools provide solutions for energy savings from design through operation
-
Energy conservation in a crude unit
Feb-2016
Online cleaning of a CDU/VDU heat exchanger network saved on time, energy and environmental impact.
-
2030 isn’t long off – the future of advanced biofuels (ERTC)
Nov-2020
The use of biofuels is increasing industry-wide due to legislation incentives aimed at producing low greenhouse gas-emitting transport fuels. Feedstock ...
-
Dec-2020
Leveraging IIOT concepts leads to a reduction in energy consumption and improved refining margin
-
High performance trays for a fractionator in an aromatics plant
May-2015
Distillation is a very important separation technology in refineries and downstream chemical processing. Mass transfer internals in distillation columns ...
-
Reforming exchanger system in large-scale methanol plants
Jul-1997
By eliminating a tubular fired furnace, the Kellogg Reforming Exchanger System (KRES), used in the production of methanol, is proving to be profitable ...
-
Process improvements in the direct hydration of olefins to alcohols
May-2014
Synthetic alcohols produced by direct hydration have wide application in the process industries as solvents, in the production of cosmetics and as intermediates ...
-
Designing a divided wall column
Mar-2016
A refiner plans the application of divided wall column technology for greater energy efficiency in the distillation of multi-component reformate
-
Improving level control in desalters to aid in use of opportunity crudes
Sep-2019
Refineries are a complex set of various operating units designed to process crude oil into refined products such as gasoline, diesel, jet fuels and feedstocks ...
-
Apr-2012
Operators of process equipment have an obligation to understand the existing and future potential for unit reliability and operability.
-
Installing a power recovery system on FCC or RFCC units
Jan-2010
Full examination of the design options and operating issues related to the installation of a PRS on a FCC or RFCC unit will increase energy efficiency ...
-
Towards a zero (net) carbon refinery
Jan-2013
Review of options for refiners to reduce the carbon emissions from their refineries. The technologies already exist to develop a refinery that has zero ...
-
Practical flare gas recovery for minimising flaring
Apr-2015
Flares play a critical role as a safety device in refineries, and in most oil and gas producing or processing facilities.
-
Converting two columns into one
Nov-2017
Dividing wall column technology can be tailor-made to meet specifications for product quality with less utility consumption and lower capital costs
-
Raising diesel yield by chemical treatment
Dec-2020
A chemical treatment programme combined with process monitoring enables increased production of middle distillates.
-
Operating challenges associated with fines in the delayed coker
Jun-2014
The coking process has been around since the early days of the refining industry. Over the years it has undergone continuous improvements to make it a ...
-
Energy recovery with compact heat exchangers
Jan-2012
Compact heat exchangers are used for heat recovery applications where high efficiency is vital, space constraints apply, or exotic materials are requi ...
-
A broader view to improve energy efficiency
May-2017
A project to improve a FCC unit’s energy efficiency took into account surrounding process units to expand opportunities for saving energy and utilit ...
-
Driving down costs in hydrogen production
Mar-2013
An optimised hydrogen plant design achieves the right balance of minimising both Capex and Opex costs, while meeting the specific objectives of the end ...
-
Optimise the route to emissions compliance
Aug-2017
Increasingly stringent SO2 emission regulations may demand smart and cost-effective alternatives to generic amine based tail gas treating units.
-
Best practice in energy efficiency
Apr-2015
Energy management software tools provide solutions for energy savings from design through operation
-
Real-time refinery energy management
Oct-2009
An online model installed at Repsol Cartagena refinery enables optimal balance between internal energy production and demand
-
Can refiners afford carbon capture?
Jan-2010
CCS is not widely considered an economical way of reducing refiners’ carbon footprints, but case studies indicate great variation in the cost of imp ...
-
Apr-2011
An integrated programme of process integration techniques lowers CO2 emissions levels in refineries through energy savings
-
Future of opportunity crudes processing
Oct-2011
Five critical drivers help refiners remain profitable and sustain long-term business goals while processing relatively inexpensive, low-quality crudes
-
Heat integration projects for refining processes
Oct-2013
Heat integration projects can deliver substantial savings, but they require detailed simulation and case-specific heat integration analysis
-
Decarbonization, electrification and the case for modern electric process heaters
Jul-2020
Companies in liquified natural gas (LNG) and other industries have been taking bold steps to reduce their carbon footprint.
-
When excess air becomes too much
Jul-2020
Excessive use of excess air impacts operating costs through fuel efficiency, furnace reliability, and stack emissions
-
Increase duty in tube side condensers
Jul-2020
A retrofit is shown to improve several aspects of tube side condensation processes.
-
Downtime damages environmental performance too
Jul-2020
Advanced technologies can reduce the environmental impact of unexpected shutdowns.
-
Improving hydrotreater performance with welded plate heat exchangers
Jul-2020
Pressure has never been higher on refiners to improve the efficiency of their energy-intensive processes.
-
In-situ refinery and storage terminal environmental remediation
Jun-2020
In the 1960’s there were five refineries built close to Ingolstadt. The location was central to the major refined products markets in Bavaria. The TAL ...
-
Jun-2020
Petcoke gasification. The chemistry of gasification fits somewhere between combustion and pyrolysis. Combustion is a high temperature reaction in an excess ...
-
Preparing for the energy transition
Feb-2020
The industrial energy transition is characterised by fast-moving changes, technological developments, and a high degree of uncertainty.
-
SMR integration with increased CO2 production
Feb-2020
Optimising the efficiency of a plant producing hydrogen by natural gas reforming reduces CO2 emissions and lowers fossil fuel consumption.
-
Determining temperature class for electric process heaters
Jan-2020
Electric process heaters that interface with flammable materials in explosive environments need to be properly evaluated to protect the equipment against ...
-
Three forces fuelling industrial energy transition (ADS)
Dec-2019
The energy transition is challenging every industrial sector, whether it is the energy consumed, the emissions produced, or the products created.
-
Case study: How Shell is navigating the energy transition (ERTC)
Dec-2019
Although the transportation sector’s trend towards electrification offers important climate change and air quality benefits, it presents many energy ...
-
Custom boilers meet capacity, emissions challenges (TIA)
Nov-2019
Many refinery complexes in Texas are ageing. It is not uncommon to find boilers that are 50 or more years old. As a result, these facilities can be liable ...
-
Improving level control in desalters to aid in use of opportunity crudes
Sep-2019
Refineries are a complex set of various operating units designed to process crude oil into refined products such as gasoline, diesel, jet fuels and feedstocks ...
-
Aug-2019
Analysing desalter performance and improving crude blending capacity with multi-phase instrumentation and control.
-
Best practice for refinery flowsheets
Aug-2019
Refinery-wide flowsheets can demonstrate the true representation of changes in key operating variables and their associated impact on refinery operati ...
-
Desalter interface control optimises crude processing (TIA)
Aug-2019
To improve margins, refiners continuously look to optimise feedstock blends. Variability can bring significant operational challenges during the refining ...
-
Digitalisation is transforming KPI setting
Aug-2019
Digitalisation means turning numbers on a dashboard into profit on your income statement.
-
Jul-2019
Building a good time series model is the primary requirement for generating good oil price forecasts.
-
Digital twins enhance LNG plant performance
May-2019
Digitalisation technologies offer new and disruptive ways to overcome the challenges of increasing margin, reducing carbon emissions and addressing talent ...
-
America’s energy transformation to bring 10,000 energy executives together
May-2019
U S petrochemicals are set for significant growth in output as new production capacity comes online and demand strengthens in key end-use markets, but ...
-
Factors affecting Claus waste heat boiler design and operation
Mar-2019
The Claus Waste Heat Boiler (WHB) is a critical piece of equipment in a Sulphur Recovery Unit (SRU); its fundamental purpose is as a heat transfer device ...
-
What the Energy and Chemical industry should learn from the music industry
Feb-2019
The Energy and Chemical industry is in desperate need of a shake-up. It is at or near the bottom of every industry digital maturity league table.
-
Spherical catalyst carriers with unprecedented size uniformity (ERTC)
Jan-2019
An increased demand for small diameter (less than 4 mm) spherical catalyst carriers led to the development of Saint-Gobain NorPro’s Accu® Spheres.
-
Analysis, active filtration unlock guard vessel stability (ERTC)
Jan-2019
For the first time in years, they did not need jackhammers to unload the guard vessel. It was another short cycle, and there was another crust layer.
-
Jet mixers for tank mixing and blending
-
Distillation Experts Conclave
-
SSX™ Technology
-
Oil and gas water treatment applications
-
Processing heavy canadian crude
-
Axens on Youtube
-
FluegasExact 2700 effective combustion analysis
-
Process burners
-
Be future forward
-
Ball valves for pipelines and refineries
-
FCC catalysts & additives
SPONSORS