-
Detecting and dealing with hydrate formation
Apr-2010
A review of cause, detection and treatment of hydrate plug formation in 
gas pipelines. Gas hydrates are solid crystalline compounds, which have ...
-
Sour water: where it comes from and how to handle it
Sep-2011
Sour water strippers are common in gas processing facilities, sulphur recovery units, wellhead facilities, and refinery applications. Understanding the ...
-
The role of tail gas treating unit 
quench towers
Jun-2016
A quench tower cools gas entering a tail gas amine unit but also protects the amine against SO2 breakthrough.
-
Optimising pumparound reflux for 
zero-cost energy savings
Apr-2012
By increasing pumparound ratios in principal units, refinery engineers were able to recover energy for process heating and reduce stack emissions
-
GC-MS: an ideal tool for forensic analysis
Mar-2011
Gas chromatography-mass spectrometry (GC-MS) presents the ideal analytical tool for forensic analysis in the petrochemical industry.
-
The design temperature of flare systems
Apr-2017
A key objective when setting flare system design conditions is to maintain the integrity of the system during fire relief
-
The petrochemistry of paraxylene

Feb-2015
Understanding the basics of the paraxylene manufacturing process.
-
Assessment of crude oil blends
Oct-2011
A refiner’s assessment of the compatibility of opportunity crudes in blends aims to avoid the processing problems introduced by lower-quality feedst ...
-
Co-processing alternative feedstocks through the FCC
Apr-2023
Decarbonise your FCC by co-processing alternative feedstocks, and enhance the incorporation of biogenic carbon in products.
-
Combating green oil formation in a CCR reformer
Jul-2013
The addition of a chloride adsorber guard bed solved a refiner’s issues with contamination affecting a CCR reformer’s rich gas compressor
-
When excess air becomes too much
Jul-2020
Excessive use of excess air impacts operating costs through fuel efficiency, furnace reliability, and stack emissions
-
Recovery of olefins from refinery offgases
Oct-1998
The Lummus process eliminates the multi-stage feed gas compressor yet maintains over 90 per cent recovery of ethylene while cutting capital cost and reducing ...
-
Mar-2012
The source of a fouling problem in a FCC CO boiler was identified by systematic analysis of fresh catalysts, additives and equilibrium catalysts
-
Refinery power failures: causes, costs 
and solutions
Aug-2013
Power outages typically lead to damaging costs for refiners. Strategies are 
needed to minimise them.
-
Microbiological causes of corrosion
Jul-2014
Many of the most serious problems with corrosion of refinery equipment have a microbiological basis
-
Bioethers impact on the gasoline pool
Feb-2007
Benefits of producing bioethers compared to blending bioethanol are examined for the total European gasoline pool. The result of maximising ethanol use ...
-
Mercury removal in hydrocarbon streams
Mar-2009
The presence of mercury in refinery hydrocarbon streams results in detrimental effects, including catalyst poisoning, corriosion and safety issues
-
Oct-2011
Ring distributors are a simple yet effective means of improving air/steam distribution within the FCC unit
-
Ambient conditions impact CO and NOx emissions: part II
Jul-2009
Effects of air temperature and humidity on burner NOx emissions are discussed, including considerations for factoring in these effects
-
Cost estimating for turnarounds
Jan-2012
Cost estimates for refinery turnarounds can lack accuracy, but lessons learned 
from capital project estimating could improve matters
-
Simulation of a visbreaking unit
Apr-2011
Simulation of a commercial visbreaking unit supports optimisation of the unit’s performance. The visbreaking unit utilises vacuum residue as a feed and ...
-
Apr-2007
Utilisation of refinery offgases for hydrogen production. Three basic schemes of ROG integration into a steam reformer plant were investigated. These schemes ...
-
Delayed coking and LC-Fining technology - a winning combination
Apr-2008
The high price of oil and increasing global demand for refined products have resulted in unprecedented refining margins, especially for those refiners ...
-
Mercury treatment options for natural 
gas plants
Jan-2014
Removing mercury as close as is practicable to the front end of a natural gas processing system is the best choice
-
Controlling film temperature in fired heaters
Jan-2013
Film temperature control is critical to the successful design of fired heaters, especially for heaters employed in upgrading heavy feedstocks
-
Tools for FCC unit troubleshooting
Nov-2022
Strategies, resources, and technology can help to rapidly identify potential operational problems in FCC units targeted for upgrading and optimisation ...
-
On-demand propylene from naphtha
Jun-2017
A new catalytic process targets economic production of propylene from naphtha at relatively low capital and operating costs
-
Reducing NOx emissions from an FCC unit (TIA)
Aug-2018
Refinery processes account for a considerable share of the overall emissions of air pollutants in Europe. The Industrial Emissions Directive (IED) is the ...
-
Pre-reformer catalyst in a hydrogen plant
Apr-2020
Good operation following recommended practice with technical support highlight the successful performance of a pre-reformer catalyst.
-
How refiners can capitalise on the petrochemical industry
Aug-2020
As the demand for refined products is falling and demand for petrochemical products is increasing, it is vital that refiners consider petrochemical integration, ...
-
Waste recycling: an opportunity for refiners?
Aug-2020
The Circular Economy has been established as the number one priority in the European Green Deal and innovative recycling technologies are helping refiners ...
-
Improving turnarounds and operations with online cleaning
Sep-2020
Case histories illustrate the financial and operational gains achieved by replacing mechanical cleaning with online, closed-loop operations. The conventional ...
-
Modelling ensures a successful revamp
Nov-2020
Pre-turnaround computational modelling built confidence in the benefits of introducing design changes to a FCC regenerator revamp.
-
FCC catalyst boosts bottoms upgrade
Nov-2020
A combination of novel matrix technologies in a new FCC catalyst increased bottoms upgrading of residual feeds and improved profitability.
-
What type of catalyst do we need for low pressure hydrotreating of middle distillates?
Feb-2021
Responses to a question in the Q1 2021 issues Q&A Feature
-
Energy network monitoring and optimisation
Jun-2021
A software program for optimisation of an energy network supports decisions on equipment use in refineries that produce and import power.
-
Increase reliability and profitability in delayed coking units
Sep-2021
Global refiners are always seeking new techniques to optimise their refinery assets with the purpose of maximising their profitability.
-
From bench scale to commercial unit
Apr-2022
A road map for designing and commercialising novel processes
-
An introduction to fouling in fired heaters: part 1
Apr-2022
Fouling is the accumulation and formation of unwanted materials on the surfaces of processing equipment.
-
Importance of testing for vacuum ejectors in refinery service
Jun-2022
Efforts should be made to identify and avoid errors in the specification, engineering, and manufacturing of vacuum system equipment before they manifest ...
-
Production optimisation for refining and olefins: how best to achieve it
Aug-2022
To suceed, companies must decisively implement production optimisation strategies using the latest AI-driven technologies, like digital twins and prescriptive ...
-
Navigating environmental complexities at pace
Nov-2022
Revamping existing hydrogen plants can provide a significant and lasting impact on reducing greenhouse gas emissions towards net zero.
-
Should we be using phthalate-free polypropylene? (TIA)
Feb-2023
With the ongoing Covid-19 pandemic, people are getting more familiar with products made of polypropylene resin, such as the ubiquitous face masks and omnipresent ...
-
Interpreting FCC equilibrium 
catalyst data
Apr-2018
Regular Ecat and fines analysis provides information to support optimum performance from the FCC.
-
Role of FCC process and catalysts in the energy transition
Aug-2022
In the evolving circular economy, proper leveraging of FCC technology and operations can deliver value for refiners in the decades going forward.
-
Detection of VOCs demands continuous innovation in calibration gases
Oct-2011
With an ever-increasing number of processing plants coming on stream worldwide to keep up with the burgeoning petrochemical industry, the focus on the ...
-
Refining-petrochemicals integration: an Indian view
Mar-2018
Integrating a refinery with a petrochemicals complex offers high value products and a boost to gross margin.
-
Evaluating quickly deactivating catalytic systems (TIA)
Nov-2018
Avantium provides contract research services for high throughput catalysis R&D. For some years now, Avantium has been helping refineries select the best ...
-
Automating catalyst evaluation (TIA)
Nov-2019
Accurate evaluation of catalysts performance is an important step in optimising catalytic refinery processes with respect to product yields, run length, ...
-
What is sintering in relation to catalyst deactivation and how can it be avoided? (PTQ Q&A)
Oct-2020
Response to a question in the Q3 2020 issue of PTQ
-
Overcoming wastewater challenges of opportunity crude processing
Feb-2024
Refinery wastewater facilities need new practices and solutions for efficient and sustainable operation with heavy opportunity crudes.
-
Filtration and separation for industrial carbon capture, transport, and storage
Feb-2024
Novel filtration and separation products and a deep understanding of material science and fluid contamination characteristics are needed to reduce the ...
-
Considerations for crude unit preflash drums and preflash towers
Feb-2024
A guide to debottlenecking, revamping, designing, and operating crude unit preflash facilities based on literature and the authors’ experience.
-
Solving the flow control challenges in ethylene: Part 1
Jan-2024
Increasing supply of plastics to meet demand while reducing emissions to hit net zero targets requires the industry to review their processes and oper ...
-
Solutions to severe service control valves
Jan-2024
Selecting the most appropriate severe service control valves is of significant importance. Control valves are an important part of the refining and chemical ...
-
The circular economy as an emerging market in the petrochemicals industry
Jan-2024
Within the energy industry, the oil and gas market continues to hold a prominent position, but it is currently undergoing a transition, moving its focus ...
-
OptiFuel optimising gasoline, diesel and renewable analysis while ensuring regulatory compliance
Jan-2024
The global demand for oil is on the rise, driven strongly by the petrochemical and aviation sectors.
-
JFA-70Xi for sustainable aviation fuel
Jan-2024
SAF (Sustainable Aviation Fuels; sometimes known as renewable jet fuels or biojets) have widely been accepted as the major contributor to the global reduction ...
-
Closed-loop sampling systems can lower fugitive emission levels
Dec-2023
Becoming a net-zero facility is easier with the right grab sampling technology. The goal of most plant operators in today’s environment is to operate ...
-
Best practices for refinery boilers field service
Dec-2023
Those servicing refinery boilers often face tight deadlines, limited outage windows, and space constraints. Industrial boilers are generally custom pieces ...
-
Unicracking unit flow scheme optimisation and integration
Nov-2023
How an optimisation and integration approach can assist in maximising refinery margin for a residue upgrading project.
-
Olefin purification: Why selecting the right adsorbent matters
Nov-2023
Removing difficult-to-detect contaminants helps minimise adsorbent reactivity while avoiding side reactions and excessive heat release.
-
An economically attractive carbon capture solution for FCC
Nov-2023
Reducing the cost of FCC carbon capture along with increasing FCC throughput and facilitating wider range feedstock processing.
-
Restoring fired heater furnace heat transfer efficiency
Nov-2023
Convection section cleaning of process heaters at an Egyptian facility achieved more than 90% treating of all tube and surface areas. Inefficient heat ...
-
Balancing act of managing a refinery: New technology vs increasing revenue (ERTC 2023)
Nov-2023
Refining management is a constant balancing act between investing in new technology and increasing revenue potential. The trend in European refining is ...
-
CCS and hydrogen for decarbonisation (ERTC 2023)
Nov-2023
In the pursuit of global climate ambitions outlined in the Paris Agreement, the role of carbon capture and storage (CCS) and hydrogen technologies has ...
-
Conversion to a green refinery configuration: Assessing options, risks, and viability (ERTC 2023)
Nov-2023
In order to meet the mandates of the Paris Agreement, as well as carbon intensity and greenhouse gas emission reductions, fossil fuel-based transportation ...
-
Precious metal catalyst sampling: Not a trivial pursuit (ERTC 2023)
Nov-2023
Precious metals are likely among the most recycled substances on earth as their value always seems to make it worth someone’s time and effort to retrieve, ...
-
Predictive model for maximum feedstock flexibility (ERTC 2023)
Nov-2023
Challenge of crude oil variability. Current market conditions are driving refineries towards a permanent diversification in crudes. Crude oil is a complex ...
-
Recycling PVC production byproducts can unlock financial and environmental savings (ERTC 2023)
Nov-2023
It is no surprise that polyvinyl chloride (PVC) has near universal appeal, with a staggering 34 million tons produced annually.
-
Nov-2023
European refiners are grappling with complex challenges related to environmental regulations, changing market dynamics, and global competition.
-
Reduce, reuse, and repurpose: Minor changes for major results (ERTC 2023)
Nov-2023
Transformational change within a refinery can be challenging to navigate. New policies that incentivise sustainability also require significant invest ...
-
Reducing environmental impact of FCCs with wet gas scrubbers by using SOx additives (ERTC 2023)
Nov-2023
Over the last 80 years, the FCC has played a critical role in the refining industry and continues to adapt to shifting industry conditions. The next opportunity ...
-
Nov-2023
On September 13, the European Parliament approved the ReFuelEU Aviation Regulation, which increases sustainable aviation fuel (SAF) requirements within ...
-
ReNewFine for renewable diesel and SAF: Results of a 20-year partnership in 100% HVO (ERTC 2023)
Nov-2023
Ketjen, a wholly owned subsidiary of Albemarle, launched in January of this year from its headquarters in Houston, Texas. Our solutions support clean energy, ...
-
Steam methane reformer tube lifecycle improvement best practices
May-2024
(White Paper) - Reformer tube life assessment can be done via online monitoring, non-destructive testing, and tube harvesting with historical operating, ...