Want to remove particles from your naphtha gas phase?
Topsoe’s gas phase scale catcher effectively removes particles from the process stream and prevents reduction of bed void fraction and pressure drop build up. Particles entering with the gas, are often preventing units from optimal performance. Topsoe has developed a gas phase scale catcher, which is especially designed to catch all sizes of particles from the gas stream. Installation of the technology can significantly prolong the cycle lengths of units suffering from pressure drop problems due to plugging.
Reliable and efficient scale catching for optimal performance
Topsoe’s gas phase scale catcher is a sophisticated mechanical equipment designed to trap both small and large particles. Units suffering from premature shut-downs due to excessive pressure drop build-up can benefit significantly by installing the gas phase scale catcher. As particles are removed from the gas, it allows for full utilization of the catalyst and results in increased cycle length.
Easy access and easy cleaning
Throughout a cycle the scale catcher will collect corrosion products, fines and scales that are present in the gas stream. At turnaround the scale catcher can easily be accesses from the top of the reactor for cleaning. The particles that have settled in the scale catcher is simply vacuumed out, leaving the scale catcher clean and ready for the next cycle.
Retrofitting in existing reactors by Custom-made design
Each gas phase scale catcher is tailor-made for each reactor and is installed above the reactor tangent line or existing top distribution tray. Hence, installation of the scale catcher does not reduce the catalyst volume inside the reactor.
- Improves reactor scale catching efficiency
- Ensures minimum pressure drop build-up during the entire cycle
- Easy to maintain and clean
- Custom-made design
Slash your hydrogen production costs
By utilizing low value, excess fuel gas, you can reduce your consumption of costly traditional hydrogen plant feedstocks, such as natural gas, LPG, butane or naphtha. Upgrading fuel gas produced onsite is a proven way to significantly cut the cost of your hydrogen production. Refinery fuel gases are ...
Maximize the value of your naphtha feedstocks and downstream processes
New solutions for changing needs Lighten the burden of heavy feedstocks with Topsoe catalysts, process designs and technologies. If your refinery is like most, you’re under pressure to squeeze more value out of heavier feedstocks, and this presents new challenges for catalysts. To name just one ...
Wet gas sulfuric acid - profitable sulfur management
The WSA technology is an excellent alternative to the Claus technology for sulfur management within oil refining, coal gasification, gas sweetening etc. High steam production, feed flexibility, ease of operation, and low CAPEX & OPEX are some key benefits for the operator when selecting the WSA technology. ...
Customized grading solutions for your feedstock
Match your catalyst grading to your feedstock for minimum pressure drop build-up and maximum demetallization. As today’s opportunity crudes and heavier feedstocks become more economically viable, the oil fractions you refine are posing new challenges. Creating the optimal grading solution for your ...
Optimizing your plant performance
Expert technical services in licensing, engineering, and catalysts for hydroprocessing, hydrogen, and sulfur management applications. Refinery processes are complex and filled with potential sources of inefficiency. Our technical services get to the root of the problem and improve the refinery profitability, ...
Topsoe refinery Research & Development
Providing refiners with the best catalysts on the market would be impossible without the innovative ideas from Topsoe R&D. Combined with the knowledge obtained from our pilot plant units, catalyst development is essential to providing high-performing, customized solutions. Topsoe’s research ...
Ensuring optimal utilization of all hydroprocessing units, hydrogen and catalyst. Refiners often face bottlenecks and challenges at their different units. Many times, these are solved within the refinery itself, and only considering a single or maybe a few units. With Topsoe Stream Management the feed ...
Haldor Topsoe refinery walk-through
Exploring the hidden potential of your refinery. Refinery processes are complex and filled with potential sources of inefficiency. A Topsoe Refinery Walk-Through will identify the hidden opportunities and help you improve the refinery profitability, flexibility, safety, and reliability. Within the ...
When reliable operation and easy inspection is key
Topsoe’s outlet collector is easy to install and inspect and help ensure even flow distribution in the bottom of the reactor. It is important to have the best catalyst to ensure optimal performance of your hydroprocessing unit. However, it is equally important to have the best reactor internals ...
Higher activity, larger volume swell - the answer is HyBRIM™
Topsoe’s new superior TK-611 HyBRIM™ catalyst for high-pressure ultra-low sulfur diesel and hydrocracker pretreatment services. Now, more than ever, refiners are forced to search for the absolute top tier NiMo catalyst for their ULSD or hydrocracking pretreat reactors. Despite tremendous ...