08-07-2019
Emerson releases two new Rosemount™ 628 universal gas sensors
Emerson has introduced two new Rosemount™ 628 Universal Gas Sensors to measure carbon monoxide and oxygen depletion in addition to the existing capability to monitor hydrogen sulphide. These additions to the series enable a broader range of hazardous situations to be monitored using the Rosemount 928 Wireless Gas Monitor platform.
The Rosemount 928 Wireless Gas Monitor is a highly versatile platform for monitoring hazardous conditions in process plants, remote wellheads, pipelines, storage terminals and other facilities. It can be easily deployed using a WirelessHART® network in areas considered too impractical or expensive for the installation of conventional wired infrastructure. Once monitors are integrated into the wireless network, personnel can simply check the status of the remote monitoring system gas levels.
To simplify installation and maintenance, the Rosemount 928 Gas Monitor has hot-swappable main components, including the power module and the Rosemount 628 toxic gas sensor. Both are intrinsically safe and can be replaced in the field in minutes without the need for tools. The Rosemount 628 sensor’s calibration information is stored within the sensor, not the transmitter. This allows users to calibrate the sensor in a non-hazardous location and take it to the field for quick exchanges with installed sensors. This further enhances personnel safety by minimising their time spent in potentially hazardous locations.
The first Rosemount 628 Universal Gas Sensor was designed for hydrogen sulphide detection, given the ubiquity of this gas in the process industries. Rosemount 928 Wireless Gas Monitors have been installed around the world for this purpose. With the addition of sensors for carbon monoxide and oxygen depletion detection, these monitors can now be used for other applications, or additional gas monitors can be deployed. When and if process conditions change, monitors can be moved as necessary, so long as they are placed within the coverage area of the WirelessHART network.
Carbon monoxide can be released by a variety of combustion processes, and concentration above 1,500 ppm is immediately dangerous to life and health (IDLH). Processes able to consume oxygen can reduce atmospheric content in given areas, and any situation where oxygen drops below 19.5% is also IDLH. In many cases, more than one condition may exist at a given time, compounding the hazard.
“Hydrogen sulphide monitoring is vital to personnel safety, leading many facilities to install Rosemount 928 Wireless Gas Monitors. Having the ability to monitor for oxygen depletion and carbon monoxide is a major step forward in wireless gas monitoring,” said Joshua Hernandez, global product manager, flame and gas detection, Emerson Automation Solutions. “Companies can now solve a long-time challenging safety issue simply and cost-effectively, which shows the power of wireless network technologies. Current wireless network users can benefit from the new gas sensing types which greatly increase toxic gas safety at their sites.”
News Category:
-
Beyond processbook & PI vision: Exploring today’s industrial analytics tools
(Webinar) - In the Manufacturing 4.0 era, industrial organizations have more data at their fingertips than ever, offering the promise of higher production rates, more ...
04-06-2024
-
NextChem acquire HyDEP and Dragoni Group
Maire Tecnimont Spa announced Tuesday that NextChem, through its subsidiary NextChem Tech, has finalized the acquisition of 80 percent of HyDEP Srl and 100 percent of ...
30-04-2024
-
ClearSign Technologies receives two purchase orders from California refinery
ClearSign Technologies Corporation, an emerging leader in industrial combustion and sensing technologies that improve energy, operational efficiency and safety while ...
30-04-2024
-
AMETEK® Level Measurement Solutions unveils BrightTEK™
AMETEK Level Measurement Solutions (LMS), a business of AMETEK Inc, announces the launch of BrightTEK, a state-of-the-art wireless Industrial Internet of Things (IIoT) ...
30-04-2024
-
Aker solutions to upgrade Mongstad refinery for Equinor
Aker Solutions has been awarded a substantial EPCIC-contract by Equinor to upgrade the wastewater treatment plant facilities and lower the environmental impact of the ...
29-04-2024
-
Aspen Technology introduces AspenTech Strategic Planning for Sustainability Pathways™
Aspen Technology Inc, a global leader in industrial software, today introduced AspenTech Strategic Planning for Sustainability Pathways™, a new and unique integrated ...
26-04-2024
-
Sasol provides state of the art catalysts to INERATEC for the production of sustainable e-fuels
The catalysts will be used, among others, in the first large-scale industrial Power-to-Liquid (PtL) plant that INERATEC is currently building in Frankfurt, Germany, which ...
24-04-2024
-
Baker Hughes to supply 17 centrifugal compressors to Saudi Master Gas System project
Baker Hughes, an energy technology company, announced Tuesday that it has received an order by Worley, for and on behalf of Aramco, to supply gas technology equipment ...
23-04-2024
-
SABIC Fujian Petrochemicals select Phenol yechnology from KBR
KBR announced today it has been awarded a contract by SABIC Fujian Petrochemicals to license KBR's market-leading phenol technology in China. Under the terms of the ...
22-04-2024
-
Lummus Expands R&D capabilities to enhance innovation and water and wastewater technologies
Lummus Technology, a global provider of process technologies and value-driven energy solutions, announced the opening of its cutting-edge research and development (R&D) ...
17-04-2024