Johnson Matthey catalyst withdrawal system

The standard method of catalyst withdrawal can lead to hot catalyst leaks, personnel exposure and operational instability. Johnson Matthey’s Catalyst Withdrawal System (CWS) solves these issues by returning stability to the system, improving yields and safety.

See inside our Systems Engineering Centers

With proven experience in sampling systems, watch the Servomex experts at the Houston, TX, engineering center showcase how systems are assembled and tested to optimize performance, reliability and safety.

Renewable Diesel Solutions from Grace

Thanks to our century of experience in the petrochemical industry, we have the expertise renewable diesel producers need for the pre-treatment and purification of difficult-to-refine feedstock. TRISYL® silica adsorbents provide superior performance in the removal of polar and ionic contaminants ...

Lummus Technology: Innovating the Future

The worlds energy demands are growing in concert with the need to reduce emissions and become more sustainable. Using our resources more wisely is paramount. Learn how Lummus Technology aims to be the leading process technology and solutions provider to industries that make modern life ...

Axens Connect'in™ - Connect To Your Trusted Advisor

Connect’In™, a digital technology engineered by Axens, is the combination of high fidelity reaction models, live analysis of Axens experts and unequal access to expertise coming from technical assistance on a large install base of process units across the globe. That combination will ...

Optimizing heat flux distribution to prevent heater tube coking with dual emissivity Cetek coatings

Cetek’s patented Dual Emissivity Ceramic Coating technology manipulates and optimizes the heat flux distribution in DCU heaters which would otherwise be susceptible to coking inside tubes. We designed the dual emissivity coating system to maximize benefits based on the coking pattern ...

Heat Exchangers - we can detect leaks to as low as 1ppm

Tracerco has been at the forefront of online leak detection for the last 50 years and can detect leaks to as low as 1ppm. If you have a leak, we can identify the specific exchanger where it's happening. We can identify which exchanger within a bank is leaking. The method is non-intrusive, ...

We can’t get to net zero without hydrogen

In our Hydrogen Technologies business, the team are ramping up to accelerate the hydrogen economy and meet demand.

The world of Valmet

Valmet is a leading global developer and supplier of process technologies, automation and services for the pulp, paper and energy industries. With our automation systems and flow control solutions we serve an even wider base of process industries. We aim to become the global champion in ...

Crystaphase, there is no magic behind reactor performance

It’s not magic. It’s science. Hydroprocessors know the wall that lies between them and peak reactor performance. Fouling, pressure drop, precipitation, agglomeration, polymerization, and catalyst deactivation, these obstacles build up, block by block. We help you break through ...

Solutions for combustion control

Matt Halsey and David Fahle discuss the SERVOTOUGH FluegasExact 2700 and SERVOTOUGH Laser 3 Plus Combustion and their roles in combustion control.

OptiDist: Optimizer for continuous temperature monitoring

The Herzog OptiDist continuously monitors temperature without requiring any input from the operator, and also prevents surges or reductions. This predictive control results in better distillations, even for difficult or unknown samples.

Welcome to our clean room - preparing valves for oxygen service

The cleaning and maintenance of valves in oxygen service is one of the most important factors that simply cannot be neglected. Our special cleaning process is planned and implemented in full compliance with the international oxygen cleaning standards. See the video to step inside our clean ...