OptiCPP: Cloud & Pour Point

Combining a revolutionary patented built-in cooling system and highly precise detection mechanism, ISL's OptiCPP performs pour and/cloud point testing of any petroleum products, down to -95°C (-139°F), in accordance with all international standards.

The Life Cycle of a Radioactive Source

Sealed radioactive sources have been used widely in our measuring systems for decades now. We at Berthold are focussed on the safe handling of the sources and are there by your side during the whole active life of the measurement with a radioactive source assisting you with legal requirements ...

PAC - Petroleum Analyzer Company

PAC is the leading manufacturer of lab & process analyzers for gas chromatography, elemental analysis & physical properties. The PAC portfolio includes: AC Analytical Controls, Advanced Sensors, Alcor, Antek, Cambridge Viscosity, Herzog, ISL, PetroSpec & Phase Technology.

HELIMAX™ Ultra-Efficient Electric Heat Exchanger

The HELIMAX™ is a next generation heat exchanger with Continuous Helical Flow Technology™ that enables ultra-high heat transfer unlike large, traditional heat exchangers with dead zones. Fluctuations within the heat exchanger to either the sheath temperature or the localized flow rate ...

F4T Batch Processing - Manually Select a Profile

Use this step-by-step walk-through to learn how to manually associate process control profiles with parts using the F4T/D4T's batch processing feature.

PM PLUS™ PID and Integrated Limited Controller

Watlow’s PM PLUS™, the enhanced EZ-ZONE® PM, is now more intuitive and features an enhanced interface for easier programming and readability with a SMOOTH-TOUCH™ keypad creating an industry leading user experience.

Xtend™ by XRG Technologies

The unique design of Xtend™ causes the flow to swirl inside the tube, increasing the amount of heat transferred. This generates more swirl with less pressure drop compared to a conventional twisted tape. The swirling flow: Cools the film on the tube wall Removes coke precursors from ...

Welcome to Valmets flow laboratory

This modern testing equipment with a robot delivers first-class valve performance even in the strictest conditions. Thanks to our testing areas we can develop even better products for demanding high pressure applications with low or even zero fugitive emissions.

FLEXICOKING™ the ultimate conversion technology provided by Axens

Axens has seen the trend of an increasing supply of heavy sour crudes combined with a shrinking market for high sulfur fuel oil or petcoke push the Oil Industry to find reliable and flexible solutions for Resid Conversion. In addition, refiners are also required to meet SOx, NOx and particulate ...

Blasch Split Flow, 2 Zone Furnace

Senior Market Manager Jeff Bolebruch discusses the process improvements that can be expected when adding our VectorWall mixing system to your reaction furnace.

The Radiometric Principle

In this video our expert explains the physics and technology needed for radiometric measurement system and which parameters effect the amount of the remaining radiation detected.

Measuring CO and CH4 for safety in combustion

Rhys Jenkins and Stephen Firth talk about the growing move towards safety measurements in combustion, with a combined CO+CH4 solution.

How to fix a tube in a fired heater furnace without SD - Hot Tube Stabilization

Occasionally, tube supports (wall and roof) in the radiant section of process heaters fail, allowing the process tubes to potentially get out of alignment (sagging or bowing) or even worse, rupturing. IGS Hot-tek provides on-line repair service to stabilize the process tubes while the ...