-
Additional hydrogen production by heat exchange steam reforming
Oct-2010
Applying the heat exchanger principle in hydrogen manufacture can significantly reduce the consumption of hydrocarbon feedstock
-
Maximising ethane in liquids crackers
Jan-2013
Economics for energy and feedstock supply favour ethane feed cracking, but plant constraints must be examined rigorously before maximum ethane feeds are ...
-
Oct-2011
Stochastic simulation provides a refinery operator with the information needed to optimise storage in the tank farm
-
Novel processing ideas for a 
condensate refinery
Apr-2016
Synergised unit flow schemes for a condensate refinery aim for high value refined products.
-
Optimisation of energy consumption
Apr-2015
The true values of fuel, power and steam costs are needed for reliable estimation of energy saving projects
-
Paraffins isomerisation options
Apr-2005
Isomerisation technologies are available, from once-through and deisohexaniser recycle processes to recycle schemes involving molecular separation pro ...
-
Optimisation of a diesel 
hydrotreating unit
Jan-2015
A model based on operating data is used to meet sulphur product specifications at lower DHT reactor temperatures with longer catalyst life
-
Control of primary fractionator fouling
Jan-2009
Optimal operation and chemical treatment of primary fractionators requires an in-depth knowledge of many parameters. A combination of analytical tools ...
-
Revamp process design — optimum crude unit product yields
Jul-1997
Designing a new crude unit is an unconstrained process, limited only by capital
investment targets, while revamping an existing unit to optimise ... -
Analysis method for determining bound and free alkanolamines in HSS contaminated solutions
Jul-1990
A conductometric titration method has been developed to determine the true available alkanolamine in solutions used for H2S and CO2 removal from refinery ...
-
Optimised hydrogen production by 
steam reforming: part 2
Jul-2013
Emerging technologies for hydrogen production from steam reforming 
are modelled
-
Jan-2006
How much CO2 can a refinery release into the atmosphere? This is one of the many challenges facing refineries when it comes to reducing CO2 emmisions
-
Simulation of bitumen upgrading processes
Apr-2013
Two bitumen upgrading processes currently used in the Canadian oil sands industry were investigated using modelling and simulation techniques
-
Apr-2011
Microchannel reactor technology is on trial for the small-scale production of liquids from stranded gas
-
Troubleshooting a C3 splitter tower Part 1: evaluation
Oct-2014
Distillation trays are prone to channelling and multi-pass maldistribution in large diameter towers. Multichordal gamma scanning is key for solving such ...
-
Nov-2017
A line-up featuring ebullated bed hydrocracking delivers full conversion of bitumen, including production of premium diesel fuel
-
Gases and gas handling for the lab environment
May-2011
Over the past decade, manufacturing and process plants across the full spectrum of industry have advanced exponentially to meet the growing and evolving ...
-
Improving heat transfer in reboilers and condensers
Mar-2016
Guidelines and experience on how to deal with a loss of condensing or reboiling capacity
-
Hydrocracker revamp for Grangemouth refinery
Jul-1998
BP Oil’s Grangemouth refinery has completed an extensive revamp of its hydrocracker and FCC, reducing production of fuel oil and upgrading to middle ...
-
Thermodynamic model of sediment deposition in the LC-Fining process
Apr-2008
The LC-Fining ebullated bed hydrocracking process is used to hydrocrack residuum. In this process, sediment deposition in the downstream equipment sometimes ...
-
Stabilisation 
of asphaltenes
Jan-2009
Asphaltenes can plug refinery equipment and can decrease or stop production. Stabilisation of asphaltene particles is an efficient and cost-effective way ...
-
Heat recovery from corrosive flue gas
Apr-2015
For improvements to energy efficiency in the petrochemical industry, waste heat recovery from corrosive flue gas is the most cost effective source to ...
-
Introduction to cylinder valves and regulators
Aug-2010
Gases are 'slippery' and they behave with 'Brownian motion' - that is, they fill every corner of every space and try to go everywhere.
-
SMR integration with increased CO2 production
Feb-2020
Optimising the efficiency of a plant producing hydrogen by natural gas reforming reduces CO2 emissions and lowers fossil fuel consumption.
-
World’s biggest sulphur forming site
Jul-2014
The Habshan Sulphur Granulation Plant, located about 16km southeast of the existing Habshan Gas Complex in Abu Dhabi, is about to be the world’s largest ...
-
Problems in processing discounted crudes Part 2: crude and vacuum columns
May-2019
Project costs must be considered to fully understand whether or not an opportunity crude really does deliver on savings.
-
Developments in hydrotreating catalyst
Sep-2016
How a second generation hydrotreating catalyst was developed for high pressure ultra-low sulphur diesel units and hydrocracker pretreaters.
-
Natural gas fuels the integration of refining and petrochemicals
Jul-2012
Maximising the use of natural gas in a refinery-petrochemicals complex offers higher margins and lower carbon emissions
-
Processing shale oil in an FCC unit: 
catalyst and profit optimisation
Aug-2015
Adjustments in base catalyst, use of ZSM-5 additives and metal traps enable efficient processing of paraffinic and heavy crude in the presence of metals ...
-
Foaming in fractionation columns
Oct-2015
By understanding the foaming process and its root causes, steps can be taken to eliminate or minimise the formation of foaming.
-
Rapid and accurate analysis of sulphur and chlorine in biofuels by XRF
Nov--0001
(White Paper) -Biofuels are fuels produced from feedstocks such as vegetable oil, animal fat, used cooking oil, biomass, or a blend of these. They are ...
-
Refinery energy efficiency and environmental goals
Jul-2002
Cheaper fuels do not always reduce costs, say the authors, and an alternative is cogeneration. It is argued that fuel saving programmes and cogeneration, ...
-
Mitigating corrosion from naphthenic acid streams
Jan-2003
The authors describe how crude and side-cut analysis, laboratory and field data lead to strategies for managing high severity operating conditions needed ...
-
Mercury removal in hydrocarbon streams
Mar-2009
The presence of mercury in refinery hydrocarbon streams results in detrimental effects, including catalyst poisoning, corriosion and safety issues
-
Reliability vs recovery for delayed coking fractionators
Apr-2009
When selecting tower internals, numerous choices are available for coker main fractionator configurations, each offering benefits and trade-offs. Some ...
-
New flare technology utilising low pressure steam
Sep-2009
The American Petroleum Institute defines a flare to be a “device or system used to safely dispose of relief fluids in an environmentally compliant manner ...
-
Optimising steam systems: part II
Jul-2010
A second article on steam system optimisation addresses steam at point of use and good engineering practice to remove and return condensate
-
Real-time downstream dashboard
Oct-2010
Real-time infrastructure enabled an organisational transformation to achieve integration in a highly complex downstream supply chain
-
Cost estimating for turnarounds
Jan-2012
Cost estimates for refinery turnarounds can lack accuracy, but lessons learned 
from capital project estimating could improve matters
-
Optimising sweep gas flow in a flare header
Oct-2012
How to calculate the minimum flow of flare header sweep gas needed to maintain safe conditions
-
Production of biolubricant base stock
Oct-2012
Using microwave technology in biolubricants production enhances product yields and reduces reaction time
-
Simulating and monitoring H2 plant operations
Oct-2012
A computer program was developed to enable a refinery to monitor its hydrogen production daily to foresee potential operating problems
-
Naphtha catalytic cracking for propylene production
Mar-2013
Investment in on-purpose propylene production technology based on 
naphtha-based feedstock is taking on various process configurations
-
Refinery power failures: causes, costs 
and solutions
Aug-2013
Power outages typically lead to damaging costs for refiners. Strategies are 
needed to minimise them.
-
Refining/petrochemical integration: a new paradigm
Sep-2013
The global trend in motor fuel consumption favours diesel over gasoline. There is a simultaneous increase in demand for various petrochemicals such as ...
-
Reactor effluent air cooler safety 
through design
Oct-2013
Quality-controlled replacement of carbon steel with Duplex 2205 for revamps can increase the service life and reliability of the REAC in the high-pressure ...
-
Increase refinery profitability using Innovative FCC catalysts to process residue feedstock (1)
Oct-2013
Use catalyst fundamentals to select the best catalysts. Globally, around 35% of FCC units’ process predominantly vacuum gasoil (VGO) feedstock and 65% ...
-
Overcoming high conductivity in process condensate
Jan-2014
Analysis of design and operations enabled a refiner to eliminate contaminants from hydrogen plant process condensate by installing a high pressure str ...
-
Enhance processing with capacity control of reciprocating compressors
Apr-2014
Improvements to refinery, petrochemical and gas processing are available from the full-range stepless capacity control of reciprocating compressors
-
Risks of accumulated sulphur in sulphur recovery units
Apr-2014
While recovering sulphur in an SRU depends on condensation of sulphur, its unintended condensation and accumulation can present problems.
-
Jul-2022
Total nitrogen content is an important quality criterium for many types of water, but especially for wastewater, such as process effluents.
-
Why Reformulyser is the preferred analysis technique for gasoline grouptype analysis?
Jul-2022
Gasoline is a fuel mainly used as an engine fuel for vehicles, and as a retail product it should meet certain specifications based on local or global ...
-
Accelerating reactor cool down prior to turnaround
Jul-2022
The post-pandemic demand for transportation fuels and petrochemicals requires higher process complexity.
-
Stahl Columns: An alternative to molecular sieves?
Jun-2022
Case study and independent cost estimations lay out what may someday become the standard way to achieve deep dehydration of produced gas streams.
-
Understanding the value of arc flash management and mitigation for large electric process heaters
Jun-2022
While larger medium voltage process heaters are relatively new in hydrocarbon processing, the safety issues surrounding medium-voltage equipment are well ...
-
Achiving decarbonisation targets with innovative digital capabilities
Jun-2022
For oil and gas companies to achieve mandated decarbonisation targets, they need to increase the use of data and innovative digital capabilities, including ...
-
Achieving 95% direct CO2 reduction for hydrogen plants
Jun-2022
Decarbonisation solutions targeting existing refinery hydrogen plants enable refiners to achieve long-term CO2 capture while minimising site space requirements ...
-
Olefins and octane from FCC operations
Jun-2022
The worldwide olefins market is valued at over $322 billion by 2026 and is anticipated to grow at a compound annual growth rate of 4.0% for the 2022 to ...
-
Revamp of a methanol wash column
Jun-2022
Installation of high performance trays and internals enabled a successful revamp for a syngas purification process.
-
Energy management and sustainability of the downstream industry
Jun-2022
Energy management must feature in any strategy in the downstream industry for both environmental impact and economic competitiveness.
-
Importance of testing for vacuum ejectors in refinery service
Jun-2022
Efforts should be made to identify and avoid errors in the specification, engineering, and manufacturing of vacuum system equipment before they manifest ...
-
Artificial intelligence for sustainable development
Jun-2022
AI and machine learning technologies support the modern hydrocarbon processing industry by adopting business strategies and developing artificial solu ...
-
Meeting future Indian gasoline market demands
Jun-2022
The role Indian oil refiners can take in meeting gasoline demand with production of clean burning components.
-
Digital twin optimises FCC operations for real separator behaviour
Jun-2022
Digital twins based on process simulation models are invaluable for overcoming limitations in the design or operations phases to optimise plant profit ...
-
Rejuvenated catalysts optimise refinery margins in high severity ULSD applications
Jun-2022
Rejuvenated catalysts compare well with fresh catalysts for performance in high pressure ULSD applications with added cost savings.
-
Using future rows capacity to debottleneck fired heaters
Jun-2022
Opportunistic usage of the future row provision can lead to a multitude of benefits, provided the refiner knows what they are looking for during the r ...
-
Sustainability rankings matter
Jun-2022
From the workers on the production floor to corporate management pursuing higher returns, the common bond in the 100+ year old refining business is cultivation ...
-
The optimum installation torque (TIA)
Jun-2022
Determining the required installation torque for a tight flange system is a daily challenge for industrial valve manufacturers and plant operators alike. ...
-
A circular solution to plastic waste (TIA)
Jun-2022
Sulzer Chemtech has finalised an agreement with Encina Development Group, LLC. Sulzer will provide technology to recover high purity circular aromatics ...
-
Producing renewable liquid products from different lipid feedstocks (TIA)
Jun-2022
The refining landscape is shifting dramatically, and refiners are looking to adapt. This process often involves revamps or retrofits of existing asset ...
-
Ceramic coating application in a refinery steam methane reformer furnace
Jun-2022
Increase an SMR’s thermal efficiency by applying a high emissivity ceramic coating on the furnace box walls.
-
Economical structural design of natural gas processing plants
Jun-2022
Case study of a butane treatment unit illustrates effective structural design procedures and highlights construction challenges encountered in new and ...
-
Worldwide gas industry goes full throttle
Jun-2022
As the world transitions to low-carbon energy sources like LNG, gas markets are diversifying further into hydrogen, ammonia, methanol and petrochemica ...
-
Digital twins heat up the capabilities of energy storage plants
Jun-2022
How to support future energy security by enhancing energy storage with automated digital twins.
-
The enduring role of natural gas
Jun-2022
Conflict, energy independence goals, and the onus on diversifying the energy industry value chain rely on natural gas to serve as a stable platform during ...
-
Steam methane reformer tube lifecycle improvement best practices
May-2024
(White Paper) - Reformer tube life assessment can be done via online monitoring, non-destructive testing, and tube harvesting with historical operating, ...