The Refinery of the Future

This change toward more integrated complexes already has begun. As recently as five years ago, roughly 15 percent of new CCR PlatformingTM units were designed for petrochemicals production. Today, that number has risen to nearly 70 percent. New integrated complexes in the Middle East, Southeast Asia and China — where GDP growth is highest — are being designed to convert as much as two-thirds of their feedstock into petrochemicals. No two complexes will have the same solution, ...

BLASCH HexWall™

For sulfur recovery, sulfuric acid plant sulfur burners and spent recovery furnaces. BLASCH HexWall™ is a versatile, mechanically stable system consisting of a series of stackable six-sided blocks incorporating alternating tabs and slots on each side that are designed to ensure the blocks are positively locked together at installation. BLASCH HexWall™ is offered in a highly creep resistant mullite bonded composition designed to resist deformation under load.  

Modern crude distillation, modularized

Global interest in modular refinery construction is surging. Small modular refineries are attractive to investors for several important reasons: SPEED: Project time from contract execution to start-up can be as short as 18-24 months. LOGISTICAL ADVANTAGES:Modular refineries can be built in remote locations to realize efficiencies in supply and transportation of raw crude and refined products. LOW INITIAL COST: Small relative size makes initial capital cost more manageable. Modules ...

Improve fouling resistance in your wastewater benzene stripper

Benzene stripper columns, built so that refineries can meet the National Emissions Standards for Hazardous Air Pollutants (NESHAP), operate with several unique conditions – low vapor rates, high liquid loads, and a high tendency toward fouling make designing well-balanced, effective internals difficult. The Problem: Two Refinery Case Studies Sulzer was contacted by two separate refiners who noted a continued fouling problem and short run lengths on their wastewater strippers. ...

Neles Easyflow™

Neles Easyflow high-performance solutions perfectly complement our portfolio with a quality range of pre-engineered products designed for use in many standard applications and process conditions. The portfolio delivers the same high quality and attention to detail that matters most, like  you always expect from Valmet. Neles Easyflow solutions offer a complete suite of products designed to work  together for easy creation of automated valve assemblies, delivering reliable, ...

Trays for any application

Sulzer Chemtech offers the largest tray portfolio on the market. Whatever the requirements, we have the right tray! Continuous innovations and improvements are: • First movable valve • First fixed valve • First customer tray design program • Use of push valves on commercial trays • Alliance with Shell Global Solutions to widen our tray Portfolio • Incorporation of fixed valves on multi downcomer Trays • Development of VGPlus • Highest capacity ...

TRI-SHARK Control Valves

TRI-SHARK control valves are able to achieve a nearly equal percentage inherent characteristic, which greatly extends the control range ability. Furthermore, they offer great advantages in the field of cavitation reduction and noise attenuation, as well as in dynamic torque reduction. They are suitable for a wide range of services, for cryogenic temperatures from -196°C up to +815°C, including liquids, gases and steam.

Neles flow control solutions

We are a global leader in flow control solutions and services. Our valves, pumps and valve automation technologies are known for quality, reliability and highest safety. Our customers operate in pulp, paper and board industry, mining and metals, chemicals, refining, energy and many other process industries. With our market-leading expertise, products and services we are committed to bring your business forward.

PAC solutions for sustainable aviation fuel

The aviation industry is determined to develop sustainable solutions to produce cost-competitive, high-yield jet fuel with minimal environmental impact. Countries throughout North America, Europe, and Asia Pacific are currently at different stages in developing guidelines that will mandate the use of sustainable aviation fuel. Today, the global aviation industry produces about 2% of all human-induced CO2 emissions. Transitioning to sustainable aviation fuel could help reduce ...

PURASPEC CLEAR Chloride guards

Chlorides in a refinery. Where does it come from? Chlorides are introduced into the refinery flowsheet in several ways. Some crude sources can bring both inorganic and organic chloride content. Desalter processes and chemical additives are used to remove chlorides and prevent corrosion and fouling caused by these chlorides. The other major source is from the Catalytic Reforming Unit (CRU). This unit upgrades straight run naphtha value for use in the gasoline pool or as petrochemical ...

OptiDist

The benchmark in atmospheric distillation testing. Thousands of users worldwide trust OptiDist™ for its state-of-the-art solution for performing atmospheric distillation, offering the most precision and ease of use. The versatile design enables multi-methods and non-standard capabilities which can easily be adapted for different applications. The testing and results are in full compliance with all atmospheric distillation methods.

Maximize the value of your naphtha feedstocks and downstream processes

New solutions for changing needs Lighten the burden of heavy feedstocks with Topsoe catalysts, process designs and technologies. If your refinery is like most, you’re under pressure to squeeze more value out of heavier feedstocks, and this presents new challenges for catalysts. To name just one example, increasing use of coker feedstocks has led to higher silica and nitrogen levels in the naphtha streams, requiring catalysts with superior HDN activity and greater surface ...

Separator technology reduces refinery operating costs and downtime

A US refining company contacted us to discuss a separation problem in the feed to an alkylation process. Caustic entrainment from their selective hydrogenation unit was poisoning the hydrofluoric acid catalyst in the alkylation unit. The continuous phase feed to the alkylation unit consisted of ~180m3/hr of mixed C4 hydrocarbons, mainly butanes and butylenes, with varying levels of 10 – 20% caustic solution entrained as a dispersed aqueous phase. Sulzer was commissioned ...