logo


Number: 375

Display:

  • Exchanger leak testing - chemical tracers

    Tracerco has been at the forefront of the development of online leak detection for the last 40 years. The method allows the detection of leaks as small as 0.5%. However, customer demands to measure smaller leaks affecting product quality, has prompted extensive research to develop alternative online methods. Through the development of specialist chemical tracers leaks as small as 0.0001% are readily identified. Project Field Test In the following case study, Exchangers A and ...

  • Improve fouling resistance in your wastewater benzene stripper

    Benzene stripper columns, built so that refineries can meet the National Emissions Standards for Hazardous Air Pollutants (NESHAP), operate with several unique conditions – low vapor rates, high liquid loads, and a high tendency toward fouling make designing well-balanced, effective internals difficult. The Problem: Two Refinery Case Studies Sulzer was contacted by two separate refiners who noted a continued fouling problem and short run lengths on their wastewater strippers. ...

  • Tracerco Diagnostics™ Separator study

    What does a Tracerco Diagnostics™ Separator study reveal? Tru-Scan™ and PhaseFinder™ studies of a separator will reveal the liquid level, the presence and height of any foam, the oil and water interface position and extent of emulsion band, as well as the presence and extent of sand deposits within the vessel. These technologies will also detect internal hardware issues, such as inlet device damage. The scans are carried out whilst the vessel is operating, so real-time information ...

  • Driving Syngas Performance

    Innovation in design: We design our own catalyst carrier utilising our strength of 40 years’ experience in the Ceramics industry. Catalysts are formed using polymer ceramic technology rather than the traditional pressure method, which provides higher intrinsic strength, greater geometric surface area and surface texture. Textured Surface Technology: Texture on the Magcat spherical shape creates a 30% improvement in active surface area, increasing the effective reaction zone ...

  • Mobile Wastewater Treatment and Wastewater Reuse Solutions

    Wastewater Treatment: A challenge and an Opportunity. Plant operators face numerous challenges that require innovative solutions to improve the efficiency and reliability of wastewater treatment at their sites. With a steadfast commitment to address these concerns, NSI Mobile Water Solutions emerges as a leading ally for industrial sites. Our modular plug-and-play wastewater treatment systems not only enable rapid response when urgent action is required, but also empower businesses ...

  • Tracerco™ Level System

    Bulk level measurement. Developed to comply with the latest functional safety standards, the SIL2 certified TracercoTM level system delivers extremely reliable bulk level measurements, regardless of process conditions. Its external modular design, with no moving parts, provides measurement redundancy, as well as the ability to offer consistent, accurate level measurement. This offers operators process optimisation, leading to improved product quality and reduced process issues. Key ...

  • Sustainable Innovation from Lummus Technology

    The race is on for a lower carbon energy future. Is your facility ready? With a portfolio that can lower emissions while optimizing operational costs and maximizing profitability, Lummus Technology is your source for process technologies and value-driven energy solutions. Let us help you reach sustainability targets and gain a competitive advantage in the energy transition. The race is on for a lower carbon energy future. Is your facility ready?

  • Multi-cassette designs provide a new option for mist elimination

    In many industrial processes, the entrainment of liquid in gas streams can lead to damage to compressors or filler materials such as molecular sieves or, at the very least, reduction of throughput. The formation and the size of liquid droplets in the gas stream are determined mainly by the process application. With the wide variation of entrainment and processes, various technologies continue to develop to best meet those needs. New Mist Elimination Technology The Sulzer MKS ...

  • Getting to know our highly innovative solutions

    Analytical testing instrumentation AMETEK Grabner Instruments develops and manufactures innovative, fully automated testing equipment for global laboratory, process, and mobile applications

  • Condensate is crude

    Ultra-light crudes and condensates are here to stay. These streams have flooded the market in recent years, and many of them are deeply discounted against reference crudes. Refiners have been processing increasing percentages of this light material through their Crude Distillation Units (CDUs) up against unit naphtha handling limits. On the surface, processing condensate and other ultra-light crudes with high API gravity and low sulfur should be easy. In reality, many refiners ...

  • On budget, on time, offline

    Flawless project execution will not prevent a unit shutdown due to selecting the wrong metallurgy for a challenging crude slate. No matter how well it is fabricated and installed, a shell and tube exchanger with cold, high viscosity vacuum resid on the tube side will have poor heat transfer performance. On-time shipping and installation of a too-small desalter will not prevent crude column overhead corrosion if the centerline velocity is overly optimistic for the design crude. A ...

  • Higher activity, larger volume swell - the answer is HyBRIM™

    Topsoe’s new superior TK-611 HyBRIM™ catalyst for high-pressure ultra-low sulfur diesel and hydrocracker pretreatment services. Now, more than ever, refiners are forced to search for the absolute top tier NiMo catalyst for their ULSD or hydrocracking pretreat reactors. Despite tremendous improvements in the catalyst technology within the past couple of decades, ultralow sulfur fuel legislation and the shift towards maximizing diesel production from VGO hydrocracking ...

  • Herzog OptiFlash® Cleveland Open Cup

    Easy, safe and accurate flash point determination. PAC’s Herzog OptiFlash is the new benchmark in flash point analysis, fully designed to meet today’s expectations on user convenience, quality and safety compliance. The Optiflash accurately detects flashpoint up to 400°C for petroleum products, lube oil, gear oil, food & beverages, chemicals, and fluxed bitumen. The OptiFlash is fully compliant with leading global standards.  

  • Introduction to Sinopec Steam Cracking Technology

    Sinopec has been committed to the development and application of steam cracking technology for almost 40 years, and has mastered advanced and complete ethylene technology which can process a variety of feedstocks, including CBL cracking furnace technology, 3 major ethylene recovery technologies (LECT, ART and AERP) and WAO. This webinar will introduce the technology and its applications, with an emphasis on how it can be applied in a variety of plants. By attending, you will ...

  • Introduction to the Sinopec Closed Coke Handling System

    The Sinopec Closed Coke Handling System (S-CCHS) is a safe and eco-friendly closed petroleum coke removal, conveying, and storage system with remote intelligent operation for pollution-free coke removal. This webinar will introduce the technology and its applications, with an emphasis on how it can be applied in your delayed coking unit operations. By attending, you will gain insights into: - Components and operation of the S-CCHS technology - How S-CCHS can eliminate ...

  • Innovative solutions to shape the hydrogen economy

    View this webinar for an insightful journey into the future of sustainable energy with Honeywell H₂ Solutions. In this exclusive webinar, we'll delve into cutting-edge innovations in hydrogen technology, focusing on Blue Hydrogen solutions and Liquid Organic Hydrogen Carriers (LOHC). Attending will offer these valuable benefits: - Discover how Honeywell is leading the way in transforming the energy industry through Blue Hydrogen, a game-changing process that reduces carbon ...

  • Covering your streams with gas chromatography: Analytical technique and key applications

    Gas Chromatography is a critical part of any analytical lab in the refining process. It is such a standard that operators take for granted all the ways it is used. Join us as we will be touching on the importance of GC in the lab, what goes into selecting a unit, and three key applications seen in many labs: Refinery Gas Analysis, Group type Analysis with Reformulyzer pre-frac, and Simulated Distillation. In this webinar we will: - Give an overview of the importance of GC ...

  • Beyond processbook & PI vision: Exploring today’s industrial analytics tools

    In the Manufacturing 4.0 era, industrial organizations have more data at their fingertips than ever, offering the promise of higher production rates, more consistent quality, and reduced costs through data-driven strategies. Standing between many businesses and this promise of process optimization are questions surrounding the right tools to harness this data effectively – a choice complicated by the shifting status of longtime standard OSIsoft’s ProcessBook and PI Vision ...

  • Overcoming roadblocks to decarbonisation

    Reducing global CO2 emissions and limiting the increase in global average temperature to 1.5°C is probably the greatest challenge humanity has ever faced. The continuous increase in strength and frequency of natural disasters accompanied with record-high temperatures have drastically accelerated the need to take action to reduce our carbon impact. There is a global consensus between governments, companies, and the public that there is a need to decarbonise our societies and, ...

  • Biofilm: A hidden threat to refining and petrochemical operations

    Did you know that a seemingly insignificant amount of biofilm can negatively affect heat exchanger reliability and efficiency and, as a result, significantly limit production? Attend this webinar from Solenis to gain valuable insights into risks and solution methodologies for biofilm issues. • Learn how biofilm can affect your profitability and production efficiency • Explore novel technologies from Solenis that mitigate the risks posed by biofilm • Hear about a leading ...

  • Mission critical electric heat tracing solutions to support the energy transition

    Around the globe, clean fuels are helping reduce carbon emissions. And world leaders have pledged to invest in technologies such as carbon capture and hydrogen to help accelerate the clean energy transition. Biofuels, hydrogen, liquefied natural gas and carbon capture technologies are driving the transition to clean fuels and CO2 reduction. This webinar gives you the opportunity to learn how nVent RAYCHEM solutions for the energy transition markets can enable and optimize your ...

  • New digital tools to improve operational profitability in refineries

    View this webinar to learn how you can leverage new digital tools as part of the Honeywell UOP upgraded PremierPLUS Performance Services offering to avoid unplanned downtime, optimize process performance, manage personnel changes, and reduce energy and emissions. The PremierPLUS Performance Services offering addresses these challenges and can improve operational profitability by an average of $1M to $5M per year. Attending this webinar will give you an overview of Honeywell ...

  • Maximizing renewable diesel and sustainable aviation fuel yields with ISOTERRA Technology

    Investments in renewable diesel (RD) and sustainable aviation fuel (SAF) production are gaining considerable momentum and are expected to play a vital role in reducing carbon emissions for heavy-duty transportation. Currently, the majority of these projects focus on the production of HEFA (Hydroprocessed Esters and Fatty Acids). Chevron Lummus Global combines the renewable processing catalyst experience and technology of ART's ENDEAVOR™ catalyst system, CLG's hydroprocessing ...

  • Enabling energy transitions with the Callidus® Ultra Blue® Burner System

    Join this webinar to learn how your renewable energy and net zero operations can dramatically lower nitric oxide (NOx) emissions with the Honeywell Callidus Ultra-Blue Burner system. Fuels are changing in order to meet corporate commitments to carbon reduction and net zero goals. As your operations use more hydrogen and renewable fuels, production of nitric oxide is increasingly scrutinized in both external regulations and internal emissions targets. Attending this webinar ...

  • Excel® Technology: The Sustainable Solution for HydroProcessing Catalysts

    Unveil the path to sustainable catalyst processes with Excel® Rejuvenation Technology! Join us as we delve into the art of catalyst rejuvenation, uncovering the means to propel your processes towards enhanced sustainability and waste reduction. Learn how to steer your operations away from wasteful practices and embrace sustainability using Evonik's Excel® Hydroprocessing Catalysts solutions. Our certified Life Cycle Assessment (LCA) lays bare the potential emissions you can ...

  • Developments and solutions for renewable fuels testing

    Regions and nations around the world are swiftly translating their climate targets into investments in renewable energy and fuel production. This necessitates a multifaceted approach and innovative solutions. Join us for this webinar as we report on the latest developments in the renewable fuels industry, with a particular focus on the transportation sector. We will discuss a range of renewable fuels, including SAF, ethanol, biodiesel, hydrogen, and their derivatives, while exploring ...

  • Structured Catalyst for Steam Methane Reforming

    Join this webinar to learn about the benefits of ZoneFlow Structured Catalyst for Steam Methane Reforming. Honeywell UOP and ZoneFlow Reactor Technologies recently conducted pilot plant testing of the ZoneFlow Structured Catalyst in a large-scale pilot plant at Université Catholique de Louvain in Louvain-la-Neuve, Belgium. In this free webinar, you will have the opportunity to learn about the technology and benefits that were seen in the pilot test run at near-commercial levels: •   ...

  • Improved H2 purification and recovery with UOP Polybed™ Pressure Swing Adsorption

    Pressure Swing Adsorption (PSA) is the industry standard for H2 purification and long-term, reliable recovery. Honeywell UOP’s PSA technology is relied on by refineries and hydrogen producers worldwide, with more than 1,100 systems installed in over 70 countries. In this webinar, you will have the opportunity to gain valuable insights: - Understand what makes Honeywell UOP Polybed™ PSA purification technology unique. - Learn about recent changes in Honeywell UOP’s ...

  • Navigating Complexities of Renewables Processing

    Refineries are shifting away from producing traditional fuels to remain relevant, compliant and profitable. Join us to learn more about recent developments in renewable feedstocks processing. In this webinar from Ketjen, you will gain an understanding of the regulations and drivers that shape the renewables market. You will also have a chance to learn about operational challenges you may face while processing feedstocks with various amounts and grades of HVO or waste plastic ...

  • Fundamentals of Safe Liquid Grab Sampling

    Every day, grab (or spot) sampling systems allow oil, gas, and chemical companies around the world to simply and accurately determine the quality and composition of the fluids they process. In many cases, however, opportunities remain to improve the ease-of-use, safety, and maintenance requirements of these system by rethinking aspects of their design. In the case of panels that draw liquid samples into laboratory bottles, changes to valve assembly designs, specifically, can yield ...

  • Economics of Decarbonisation with Honeywell Sustainability Portfolio and IRA

    The Inflation Reduction Act (IRA), passed by the US government on August 16, 2022, provides nearly $370B in clean energy and climate funding over the next decade There has never been a better time to invest in a more sustainable future. Our upcoming webinar will provide valuable insights into key IRA provisions and enabling technologies to accelerate industrial decarbonisation and achieve your long-term financial and sustainability goals. This webinar will offer an incredible ...

  • Applying Crude to Chemicals technologies for effective petrochemicals production

    With the consumption of petrochemicals increasing globally and the demand for transportation fuels under pressure from energy transition initiatives, refiners are being driven to optimize their facilities and explore revenue streams outside of the traditional transportation fuel value chains. There are several alternatives and methodologies to capture additional value from crude oil through conversion into petrochemicals to consider. This webcast covers: - How to convert a ...

  • A new perspective on improving process and operational efficiencies

    Presented with ageing equipment and ever-increasing environmental restrictions, process engineers are challenged with maximizing efficiency and mitigating problems. Without the necessary information, facing this challenge can be difficult or impossible. Tracerco provides you with the insights you need to help troubleshoot production problems and optimise processes. With the widest range of scanning and tracer diagnostic services on the market, Tracerco helps the refining and ...

  • A complementary and holistic approach using mobile water solutions

    High water quality across petroleum refining and petrochemical industries is an integral part of every process, including cooling tower make-up and blowdown, desalination, filtration. Additionally, these industries unavoidably generate large volumes of wastewater. The growing demand combined with the increasing water stress and stricter regulations is creating a situation where water is becoming not only costlier but also a more valuable resource. This is leading companies ...

  • Preparing for a petrochemical plant revamp or technology upgrade

    Petrochemical producers have recently confronted unprecedented volatility in crude oil prices and limits on advantaged feedstock, while the refining and gas sectors remain vigilant to global supply conditions. However, some industry challenges remain unchanged, such as the need to optimize plant operations and cut carbon footprint by reducing the amount of energy required to drive a plant. Equipment nearing the end of its operational life can not only put plants at risk of ...

  • Elemental Analysis for Refining and Petrochemicals

    Seamless Laboratory and Process Analysis for Total Sulfur and Nitrogen. As expected shifts to petrochemical and crude oil-to-chemicals (COTC) projects expand through 2050, the need for elemental analysis in refining and petrochemical continues to grow. Refiners must meet stringent requirements due to the increase of nitrogen and sulfur in the crude, requiring more focus on processing and control. Join us to learn about laboratory and process analysis for total sulfur and nitrogen. During ...

  • How grab sampling can help improve your plants safety

    While grab sampling can be a dangerous and hazardous process for both operators and their surrounding environment, too often safety takes a back seat to other day-to-day considerations. If this sounds familiar, tune into this sponsored webinar. It's your opportunity to focus on areas in your plant where safety is a concern and learn methods for ensuring sampling that is not only safe and effective, but also representative.   In this webinar, you'll examine hazards associated ...

  • Optimizing the value of your unloaded catalyst

    The metals contained in spent catalysts offer a valuable follow-on revenue source, but how can you be sure to achieve a fair settlement or receive top dollar? You also need to balance demands of sustainability and lowered environmental impact with ease of recovery and settlement. This webinar gives you an introduction to the precious and base metal management cycle in catalysts and specifically provides you with tips for ensuring a high quality and accurate precious metal settlement, ...

  • Unleash the potential of your Naphtha Steam Cracker

    The global ethylene market grows at 3.0-3.5% annually, which amounts to 6-7 MM MTA increase in demand every year.  Greater than 95% of ethylene is produced using steam cracking. The two of the main feedstocks for steam crackers are naphtha and ethane with each supplying >45% of all ethylene production. Ethane cracking tends to have lower Cash Cost of Production, supply is regional and insufficient to meet the global ethylene demand.  Naphtha cracking has several disadvantages: ...

  • CDU desalter processing with interface control

    In this webinar, you will find out how Tracerco’s advanced multi-phase nucleonic instrumentation can analyse desalter performance and improve crude blending capacity. Discover opportunities to: - Improve environmental impact, compliance and energy usage - Reduce unplanned trips and downtime - Optimise chemical dosing (demulsifiers/neutralisers) - Reduce overhead corrosion, as well as catalyst deactivation in FCC - Improve process control enabling data driven insights With ...

  • An introduction to Sinopec Hydrocracking Technologies

    This webinar gives you an overview and understanding of hydrocracking and its applications, with an emphasis on technologies and catalysts developed by Sinopec and its research arm, Sinopec Fushun Research Institute of Petroleum and Petrochemicals (Sinopec FRIPP). You will first get an introduction to hydrocracking including feed processing and target output products. Commercial considerations include market share and reference installations such as 40 hydrocracking units designed ...

  • How turbomachinery can support decarbonization

    With the hydrocarbon processing industry’s efforts to decarbonize, hydrogen and Carbon Capture Utilization and Storage (CCUS) have further moved into focus as viable alternatives for transforming existing energy markets. Both hydrogen and CO2 provide ample opportunities to be used in hydrocarbon processes either in molecular form or as feedstock. At the same time, the unique physical properties of both hydrogen and CO2 can make them a challenge for process equipment such as ...

  • Technologies to enhance Ethylene production

    In this presentation, three technologies will be introduced. This first is swirling element radiant tube (SERTTM) technology for steam cracking furnaces. In this technology, you will find how heat transfer theory is applied to overcoming the challenges of cracking pyrolysis to meet targets. Successful commercial cases will demonstrate the technical advantages of SERTTM technology. Cracking furnaces with SERTTM technology have longer operating days, lower tube wall temperature ...

  • Steam Cracker recycle processing and product upgrade options

    LPG and light naphtha generated in a refinery complex (from both straight-run and conversion units) are sent to the ethylene cracker as feedstock. There is more i-paraffin than n-paraffin in LPG and light naphtha generated from a hydrocracker and reformer, in particular, i-butane and i-pentane. When cracking i-paraffin and n-paraffin separately in an ethylene cracker, the yield of ethylene and propylene is different; n-paraffin can generate 20wt% of “ethylene + propylene + butadiene” ...

  • Advances in benzene derivatives production

    Xylene and ethylbenzene are important benzene derivatives. In this presentation, you will learn about recent advances in the production process and catalysts of xylene and ethylbenzene. Xylene production is one of the most important aromatic producing processes. You will learn the details of process technology introduction and catalyst features of aromatics transalkylation developed by Sinopec, as well as the process strategies of raw material expansion, Inferior feed tolerance, ...

  • Deep catalytic cracking technology for maximizing the production of chemicals

    Optimization of light olefins (including ethylene, propylene and butene) production has become one of the most competitive options for refiners in the transition. Compared with conventional FCC, FCC technologies which optimized propylene production are helping refiners to restructure their product configuration, from fuel to petrochemical production. You will learn some successful commercial cases, which are aimed to help refiners to select the most suitable and competitive ...

  • Decarbonization with hydrogen solutions

    Demand for hydrogen is expected to increase up to ten-fold by 2050 when multiple industry reports predict 8-24% of the world's final energy demand will be supplied by hydrogen. Hydrogen has a unique ability to address and ˜hard-to-decarbonize' sectors including refining, chemicals, steel, heating, long-haul transport, and long-term power storage and all of which currently produce significant CO2 emissions. To achieve this, hydrogen must be produced with significantly lower carbon ...

  • Enabling circularity via plastics chemical recycling

    Chemical recycling of plastics is an emerging route to supplement mechanical recycling since polymers can be converted into monomer form.  As opposed to mechanical recycling, wherein the polymer properties degrade with each cycle, the monomers can be re-polymerized without any polymer property degradation. Petrochemical and refining operations of the future will include more plastics oil, obtained from chemical recycling, in the feedstock mix to establish circularity in the ...

  • Best Practice: Screening and QC testing of petroleum products and fuels

    Screening and quality control of petroleum products and fuels can be a tedious and expensive process when performed utilizing traditional methods. Near-Infrared spectroscopy (NIRS) as described in ASTM Guidelines E1655, D8340, and D6122 is a much faster method providing results in just 30 seconds without any solvents and reagents needed. In fact, NIRS has  become the preferred method of numerous producers to quickly quantify key parameters in petrofuels and petrochemicals ...

  • Understanding alarm management standards

    Alarms are an essential layer of protection, enabling industrial facilities to avoid abnormal situations that may put people, the environment, and profits at risk. As such, numerous standards and guidelines exist that can assist organizations in designing, implementing and maintaining alarm systems that comply with regulations. ISA 18.2, EEMUA 191, IEC 62682, API 1167 — how should organizations select these standards and guidelines? How can they be put into practice? Join ...

  • How to maintain production without your water treatment plant

    This webinar reaches out to downstream plant managers, facing an increasing challenge from their ageing assets including water treatment plants. Ageing plants may impact continuity of production. When a plant is not reliable or efficient, emergency maintenance is often required to avoid disruption to production which could result in costly downtime for operating sites. This presentation demonstrates how the rental service from Veolia’s Mobile Water Services, can safely provide ...

  • The case for plant modernization and upgrades

    With a system that's outdated or showing signs of it, you are well aware of the risks of running your plant processes with aging hardware and software. Waiting to modernize will impact your cost of ownership due to shortages of critical parts and support, will increase risk of an unplanned production shutdown, and likely will have no incremental benefits. A well-designed modernization approach allows the opportunity to reduce system footprint and costs. Whether by eliminating ...

  • How turbocompressors drive and safeguard downstream plant operations

    This webinar reaches out to end users in the hydrocarbon industry who face the challenge of achieving operational availability, equipment reliability, and efficiency in their plants. These factors are crucial for end users, with many complex and intricate processes operating in parallel. Compression technology drives and safeguards many of these processes. Presenter Ulrich Schmitz will put particular focus on different chemical/petrochemical and refinery, syngas, and LNG applications. ...

  • How to achieve operational excellence with safe and profitable operating windows

    Plant of the Future’ is making headway towards operational excellence using technologies that enable safe and efficient operations to improve your bottom line and reduce OPEX expenses. Operations Management provides the foundation needed to enable operations excellence. In this presentation, we’ll show you the tools we’ve designed to manage and control critical limits, shift handovers, and process deviations. You are going to learn: - How Honeywell Forge Operations ...

  • Learn how to build refinery models quickly and easily to support your LP model

    In this webinar we will present refinery modelling workflows, features and functionalities, which showcase Honeywell Forge Process Simulation’ refinery-wide flow sheeting capabilities. These capabilities span the beginning-to-end design, use, and exporting results of a refinery model.   First, attendees will see how easy is to create a model from scratch utilizing our Process Simulation 'drag & drop' refining reactor templates. Finally, we will showcase the product ...

  • Ensuring business continuity in industrial operations

    Join this webinar to discover the multiple areas in your organization where Honeywell Forge can help ensure the reliability, efficiency, and safety of your refining operations. We will explore cases from asset performance management and process optimization to remote worker performance and competency solutions.   The new normal is here to stay. Uncertainty is the new name of the game; however, resilience should also be a key player. How are you ensuring the reliability, ...

  • A layered approach to achieving plant-wide optimization goals

    Join this webinar to discover the multiple areas in your organization where Honeywell Forge can help ensure the reliability, efficiency, and safety of your refining operations. We will explore cases from asset performance management and process optimization to remote worker performance and competency solutions.   The new normal is here to stay. Uncertainty is the new name of the game; however, resilience should also be a key player. How are you ensuring the reliability, ...

  • Driving machine learning through fundamental machinery diagnostics

    Join Honeywell’s APM specialist, Ben Berwick, as he discusses how Honeywell leverages Asset Performance Management technology to recognize the earliest onset of rotating machinery issues. The rapid pace of predictive analytics, artificial intelligence and digital twins for industrial assets is proving revolutionary in how asset intensive organizations benefit from the actionable information provided by asset performance management (APM) software.  A key element in deriving ...

  • High-Performance Tail-Gas Treating

    Discover the benefits of applying the latest technology in modern, low-temperature Shell Claus offgas treating (SCOT™) units. See how next-generation, low-temperature SCOT catalysts can help extend cycle life, lower energy costs and ensure regulatory compliance, even with the most difficult feeds and conditions. In this webinar you will: - Learn why modern tail-gas treating units are being designed without an inline burner, and the impact this has on inlet temperatures and, ...

  • Simplify crude assay importing in UniSim design by utilizing H/CAMS

    Haverly H/CAMS is the industry leading assay crude management software with over 2000 assays. Honeywell's UniSim Design software links to Haverly H/CAMS via a COM interface and allows you to import proprietary assays with just a few clicks. This functionality increases engineering effectiveness, eliminates the need for manual data entry, and makes it easier to model crude storage facilities and refining processes. Presenters: Jagdish Rachh - Honeywell David Alexander - Haverly Moderator: Ken ...

  • Intelligently predict and manage sour water corrosion in refinery applications

    One of the primary concerns in refinery operations, especially when processing sour crudes, is management and mitigation of NH4HS (Sour Water) corrosion in hydrocrackers, hydrotreaters, FCC and other unit circuits. Honeywell's Predict-SW software, a byproduct of more than 15 years of intense Joint Industry Project (JIP) research, provides an easy to use framework to quantify NH4HS corrosion as a function of key process parameters across the refinery value chain for commonly used ...

  • Understanding the financial impact of a collapsed flue gas tunnel in your SMR

    The overall influence of tunnels on the flue gas flow in a steam methane reformer has been modeled and documented, and the concept that running a reformer without tunnels can decrease overall efficiency is well understood in the industry. The study detailed in this webinar focuses on the effects of operating a reformer after removing just a single tunnel, leaving the rest in place. The resultant flue gas flow field is analyzed by looking at temperature profiles, residence time ...

  • Maximising naphtha through hydrocracking: Refinery of the future

    Globally the demand for petrochemicals is increasing at rates nearly 1.5 times GDP. In regions where there is a heavy investment in large-scale para-xylene capacity there is a significant demand for naphtha. However not all naphtha is suitable to produce aromatics. Heavy naphtha is required, but it is in limited supply. This is where the Honeywell UOP UnicrackingTM process becomes the key enabler to petrochemical production. By installing one, or a combination of Unicracking ...

  • Towards Your Low-Carbon Refinery

    This On-Demand webcast from Shell Catalysts & Technologies, discusses proven technologies for capturing CO2 from both low and high-pressure streams.  Are You…  - Under pressure to reduce your carbon footprint?  - Looking for ways to cost-effectively reduce your CO2 emissions?  - Unsure which carbon-reduction solutions will be most appropriate for your facility? Any serious ambitions to reduce a facility’s carbon intensity are likely to be spearheaded ...

  • Intelligently predict and prevent corrosion across your operations

    Learn how the fight against corrosion never stops - it is a fact of life every day across Oil & Gas, Refining and Pipeline operations, what-if you could have insight into real-time corrosion rates in your process? Honeywell Predict® Corrosion Suite provides the next generation of corrosion management solutions, intelligent software providing real time corrosion quantification. Unlike conventional corrosion management methods, unique prediction models are employed that ...

  • From hydrogen production to sulphur recovery - let ceramics pave the way

    Learn how to boost the reliability and performance of your hydrogen production and sulphur recovery plants through the deployment of Blasch’s proven ceramic systems. Benefits include: - Higher plant reliability and much longer run-lengths - 60 -90% faster installation times - Capacity increase - Annual energy savings of several hundred thousand dollars for SRUs - Lower emissions   Flue gas tunnels in Steam Methane Reformers warp and fail causing non uniform flow ...