Trayed Towers - Tru-Scan™ & FrothView™
Tracerco provides actionable information while the system is online and operating in normal, test or upset conditions. A Tru-Scan™ diagnosis will provide you better insight into tray flooding, weeping and internal damage. Our patented FrothView™ technology offers another level of detail, measuring the actual froth height on individual trays, identifying bottlenecks and optimising performance.
The video shows how changes in the signal indicates the froth height on each tray – so you know how much spare capacity there is. The technology can also be used to check for blocked and flooding downcomers.
Using PhaseFinder™ technology provides accurate measurements of liquid levels in downcomers and the base of the tower. The changes in molecular density or makeup detected by the system indicate the liquid levels in the downcomer and base – as well as the amount of coke deposit in the base liquid.
- Corrosion and Fouling Control
- Gas Processing and Treatment
- Process Engineering
- Column, Reactor Internals, Screens and Packings
- Reliability and Asset Management
- Amine Management
- LNG, NGL and GTL
- Emissions Reduction
- Process Chemicals
- Safety, Health, Environment and Quality (SHEQ)
- Measurement and Testing Devices
- Crude and Vacuum Units
- Revamps and Turnarounds
- Mass Transfer
- Air Separation Units
- Power Generation
- Propylene Maximisation
At Tracerco, we help you see things you wouldn’t normally see. We do this by measuring the unmeasurable and accessing the inaccessible. All of which helps companies like yours solve the impossible.
Tracerco provides you with the insights you need to help troubleshoot production problems ...
Tracerco can help you understand catalyst and process flow behaviour inside your Fluid Catalytic Cracking (FCC) unit, so you can improve productivity, identify problems and plan maintenance efficiently.
Using a Tru-Scan™, we can measure the height of the catalyst level in the reactor ...
Tracerco can help you optimise your packed tower performance by analysing liquid flow distribution, liquid retention and checking for damage. You’ll be able to plan maintenance effectively and avoid emergency equipment charges.
Using a Tru-Grid™ scan, Tracerco can verify that ...
Tracerco provides actionable information while the system is online and operating in normal, test or upset conditions. A Tru-Scan™ diagnosis will provide you better insight into tray flooding, weeping and internal damage. Our patented FrothView™ technology offers another level of detail, ...
Tracerco can help you reduce catalyst loss in your reactor, optimise conversion, and identify the source of critical problems.
Using our specialist tracer technology Tracerco can assess vapour and liquid distribution in the reactor. And, we can analyse the reactor’s efficiency by ...
Tracerco routinely provides flowrate, leak testing, pipe scanning and meter calibration services. Fast, accurate, and cost effective, our technology will help you determine the flow of vapour, build-up of sludge and other fouling materials in process piping or flarelines. The technology we use to analyse ...
Scans on tanks and spheres gives you a clear picture of hydrocarbon, water and emulsion levels and determine if there is any sludge or plugged vent lines.
Tracerco can measure the height of each phase in your tank, using a PhaseFinder™ neutron backscatter device. This reliable and ...
Our solutions help you to optimise your separator operation and maintenance by providing accurate, real time information on bulk level, phase heights, emulsion and internal hardware.
Tracerco’s, non-intrusive gamma scan technology provides accurate, real time information on the ...
We offer diagnostic solutions to identify bulk level, damaged internal hardware, and distribution, residence time and flow data for scrubbers. By using specialist tracers, we can measure the performance of scrubbers to establish residence time and distribution, carry over and carry under and identify ...