logo


Number: 193

Display:

  • Cetek high emissivity coating for fired heater refractory

    Is your fired heater limited by bridge wall temperature, or firing duty? Instead of a full scale revamp, we may address these issues may by the application of Cetek’s High Emissivity Ceramic Coatings to the refractory surfaces. Cetek High Emissivity Ceramic Coatings provide improved ...

  • PAC - Petroleum Analyzer Company

    PAC is the leading manufacturer of lab & process analyzers for gas chromatography, elemental analysis & physical properties. The PAC portfolio includes: AC Analytical Controls, Advanced Sensors, Alcor, Antek, Cambridge Viscosity, Herzog, ISL, PetroSpec & Phase Technology.

  • Catalyst Tube Filling & Packing

    Magcat spheres pack evenly and predictably despite the orientation of any individual pellet VS traditional spheres packing in a chaotic manner.

  • Axens Connect'in™ - Connect To Your Trusted Advisor

    Connect’In™, a digital technology engineered by Axens, is the combination of high fidelity reaction models, live analysis of Axens experts and unequal access to expertise coming from technical assistance on a large install base of process units across the globe. That combination will ...

  • KBC Cloud Based Equipment Monitoring

    The KBC Asset Monitoring Application is a low-cost, subscription-based, cloud service for anomaly event detection for class B industrial rotating equipment assets not already under continuous monitoring.

  • Decarbonising a world reliant on chemicals

    JM low carbon solutions help our customers navigate and overcome the challenges they face in meeting emissions reduction targets. Carbon capture is key to decarbonising chemical industries, such as hydrogen, methanol, and ammonia. For refinery hydrogen plants, 95% of those CO2 emissions ...

  • Becht Fired Heaters

    Fired Equipment is integrated into nearly every refining or chemical production process. Heat generated by combustion must be safely and efficiently transferred — typically through costly high alloy coils — to a process stream that may be changing phase or reacting. Fired Heaters usually ...

  • Lasers for safety and process control in fired heaters

    Focusing on the role of the SERVOTOUGH Laser 3 Plus combustion analyzer in fired heaters combustion processes.

  • StaBlox™ Flue Gas Tunnel System

    The Blasch StaBlox Tunnel System is a versatile, mechanically stable system consisting of a series of stackable, interlocking blocks. The StaBlox system allows for an extremely fast, easy installation while at the same time offering a much higher level of reliability with ...

  • Heat Exchangers - we can detect leaks to as low as 1ppm

    Tracerco has been at the forefront of online leak detection for the last 50 years and can detect leaks to as low as 1ppm. If you have a leak, we can identify the specific exchanger where it's happening. We can identify which exchanger within a bank is leaking. The method is non-intrusive, ...

  • Is Radiometry Dangerous?

    Is Radiometry dangerous? Definitely NOT! A common prejudice against radiometric measurements is that spending time near such a measurement is dangerous and causes high radiation exposure. However, the reality is different: By using modern and sensitive detectors, the measurements can operate ...

  • IGS Cetek catalytic reformer heater process tube coating

    Thermal Inefficiencies. In a high temperature environment, steel alloy process tubes will oxidize immediately and scale will develop. This oxidation scale layer acts as an insulator and will lead to a decrease in heat transfer as the scale increases in thickness. To compensate for the ...

  • We can’t get to net zero without hydrogen

    In our Hydrogen Technologies business, the team are ramping up to accelerate the hydrogen economy and meet demand.