Miniflash FP Vision for flashpoint testing

With the MINIFLASH FP Vision, safety comes first. This analyzer determines the flash point of flammable liquid mixtures according to ASTM D6450 and ASTM D7094. These test methods are continuously closed-cup and are the safest for flashpoint testing.

Innovating for a sustainable future

Industrial ideas drive development and improve quality of life for people everywhere. Our compressors, vacuum systems, industrial tools, and power solutions run on less energy, reduce emissions and improve safety and ergonomics. This is our way of making a difference. Meet four of the ...

High Velocity Thermal Spray (HVTS) alloy cladding

IGS’s High Velocity Thermal Spray (HVTS) solutions upgrade existing metallurgy to higher alloys that provide a barrier to mitigate corrosion and / or erosion in mission critical equipment around the world. This alloy modification is essential to success of these material types when applied ...

Valmet valve factory in Vantaa, Finland

Step inside our Valve technology center in Vantaa, Finland and see how valves are manufactured, from machining to assembly, and final testing. In addition, have a look at our flow laboratory, the place for research and testing.

Axens AdvaMEG® solution for MEG regeneration and reclamation

Different types of schemes are available as part of AdvaMEG® solution such as conventional regeneration, integrated and slip stream scheme. Here is a focus on the integrated scheme.

Why Flashpoint is critical for your transportation and regulatory requirements

Valuable fragrance and flavoring chemicals are often flammable liquids because they are based upon, or diluted in, alcohol or other flammable organic solvents. Due to their flammability, the transportation of these chemicals is commonly regulated under government rules for the transportation ...

The Basic Principle of Shielding

Radiometric measurement systems require a radioactive source, which emits gamma radiation in all directions. The radioactive material is safely held in a sealed and durable capsule, which guarantees safe handling - even under extreme measurement conditions. Our Expert covers the basics ...

Watlow SELECT® VISUAL DESIGNER™

Watlow®, an industry leader in the design and manufacture of complete thermal systems, recently introduced the Watlow SELECT™ Visual Designer™, which is a product configuration tool that uses imagery to quickly and effectively communicate the features of the product being designed ...

OptiMVD

The OptiMVD is a new world-class mini viscometer and density meter that brings big performance in a small package. The state-of-the-art instrument offers unsurpassed precision, accuracy, and the ability to measure at two different temperatures and draw a sample from a single vial

Understanding the Source and Effect of Radioactivity

Fact check? Does ionizing radiation used for radiometric measurements actually glow? Have you got misconceptions about radioactivity? Radioactive materials dont glow green like you see in some films. ► Understanding source and effect, ionizing radiation, radioactive material and con ...

Servomex Laser 3 Plus - installation video

Watch the new SERVOTOUGH Laser 3 Plus TDL cross-stack analyzer range be installed in five steps by one person.

Furnace convection section robotic cleaning improves energy efficiency

Excessive fouling in the convection section of fired heaters and furnaces results in higher fuel consumption to achieve the required output. This causes high stack temperatures, reduced heat transfer, and increased emissions, which can lead to government fines and environmental damage. ...

Gas Flow & Heat Transfer in Catalyst

Magcat spheres produce a more uniformed gas flow maintaining good  gas-to-catalyst contact throughout the bed.