logo

Back

InlineSENS - Density Measuring Cell

Density and concentration measurement with low energy gamma radiation. The InlineSENS combines both a radiation source and scintillation detector in one device. Its use of low-energy gamma radiation from an Am-241 or Cm-244 source provides for strong responses to even the slightest change in product composition , with extremely low dose rates.

Features for high demands
The isotope Am-241 or Cm-244 is used as the radiation source. The advantage: Am-241 and Cm-244 have very low radiation energies, which correspond approximately to the energy of X-rays. The density measuring system InlineSENS offers high statistical accuracy and long-term stability by using a highly sensitive scintillation detector with patented drift compensation. The measuring system, which is made entirely of stainless steel, is permanently flanged to the pipeline and continuously measures the product density of liquids, suspensions, slurries, and bulk solids. In the case of the Am-241 version, the product pipe can also be supplied with a liner of Teflon (PTFE) or rubber if required. In the Cm-244 version, on the other hand, a polypropylene liner is installed as standard.

DOWNLOAD LITERATURE

View More

  • Density, concentration and solids content

    Non-contacting measurement technology made by Berthold. Berthold density measurement systems are used for the continuous process control on pipelines and in vessels. Density, concentration and solids content are determined in a non-contacting manner, without affecting the flow properties of the measured ...

  • Level Switch - Mini-Switch LB 471

    Application. The BERTHOLD level switch is used in all branches of industry, including the food industry. This measurement system is applicable where one or more alarm levels of liquids or bulk solids have to be monitored. In fact, the BERTHOLD level switch is suitable for installation on all types of ...

  • Continuous level - Non-contacting measurement

    Non-contacting measurement technology by Berthold. The level measurement technology by Berthold is used in a variety of industrial sectors – ranging from the chemical to the waste water industry. It is suitable for measuring ranges of just a few millimetres up to several metres. Applications are ...

  • Interface and Multiphase Level Measurement

    Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different product layers ...

  • Interface measurement in desalters

    Interface measurements in desalters are often regarded as not being very critical, even though every drop of oil, to be refined, passes through the desalter. As refineries try to maximize their margins, so-called opportunity crudes are often used. These crude oils generally contain increased levels of ...

  • Optimal monitoring of separation processes

    Monitoring interfaces or multiple layers in process vessels poses some challenges for the measurement technologies. Where other measuring methods fail and cannot withstand extreme process conditions, radiometric measuring systems can provide reliable results. Berthold’s radiometric measurement systems ...

  • Level control in coking units

    You want to improve the utilization of the drum capacity? Due to the conditions in the coke drum, a level measurement is a very challenging task. Where other measuring technologies tend to fail or end up being extremely unreliable, Berthold‘s radiometric level technology is ideal for monitoring the ...

  • Measurement solutions for the refining industry

    You want to optimize your production throughput with increased safety and reliability? Berthold’s radiometric instruments for non-contacting level and density measurement are widely used in the global oil refining industry. With our measuring solutions based on gamma absorption we help our customers ...

  • InlineSENS - Density Measuring Cell

    Density and concentration measurement with low energy gamma radiation. The InlineSENS combines both a radiation source and scintillation detector in one device. Its use of low-energy gamma radiation from an Am-241 or Cm-244 source provides for strong responses to even the slightest change in product ...

  • LB 350 - Online Moisture Analyzer

    Radiometric moisture analyser for representative and robust measurements. On Bulk material. The LB 350 is a moisture measurement system for real-time determination of the moisture content of a wide variety of different bulk materials such as: ■ Coke ■ Sinter mixture ■ Ore ■ Sand ■ Building ...

  • Responsive image Distillation Experts Conclave
  • Responsive image Ball valves for pipelines and refineries
  • Responsive image Jet mixers for tank mixing and blending
  • Responsive image FluegasExact 2700 effective combustion analysis
  • Responsive image Processing heavy canadian crude
  • Responsive image Axens on Youtube
  • Responsive image Oil and gas water treatment applications
  • Responsive image FCC catalysts & additives
  • Responsive image SSX™ Technology
  • Responsive image Process burners
  • Responsive image Be future forward