logo


Density, concentration and solids content

Non-contacting measurement technology made by Berthold. Berthold density measurement systems are used for the continuous process control on pipelines and in vessels. Density, concentration and solids content are determined in a non-contacting manner, without affecting the flow properties of the measured material.

Successful applications can be found in a wide range of industries and in particular when facing extreme measurement conditions:
- Extreme temperatures
- High pressure
- Dust
- Corrosive or abrasive media

The measurement can be performed on liquids and mixtures of any type, including acids, bases, solutions, emulsions and suspensions. The bulk density of solid matters such as granulates or powders can also be determined.

DOWNLOAD LITERATURE

View More

  • Density, concentration and solids content

    Non-contacting measurement technology made by Berthold. Berthold density measurement systems are used for the continuous process control on pipelines and in vessels. Density, concentration and solids content are determined in a non-contacting manner, without affecting the flow properties of the measured ...

  • Continuous level - Non-contacting measurement

    Non-contacting measurement technology by Berthold. The level measurement technology by Berthold is used in a variety of industrial sectors – ranging from the chemical to the waste water industry. It is suitable for measuring ranges of just a few millimetres up to several metres. Applications are ...

  • Interface and Multiphase Level Measurement

    Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different product layers ...

  • Interface measurement in desalters

    Interface measurements in desalters are often regarded as not being very critical, even though every drop of oil, to be refined, passes through the desalter. As refineries try to maximize their margins, so-called opportunity crudes are often used. These crude oils generally contain increased levels of ...

  • Optimal monitoring of separation processes

    Monitoring interfaces or multiple layers in process vessels poses some challenges for the measurement technologies. Where other measuring methods fail and cannot withstand extreme process conditions, radiometric measuring systems can provide reliable results. Berthold’s radiometric measurement systems ...

  • Level control in coking units

    You want to improve the utilization of the drum capacity? Due to the conditions in the coke drum, a level measurement is a very challenging task. Where other measuring technologies tend to fail or end up being extremely unreliable, Berthold‘s radiometric level technology is ideal for monitoring the ...

  • Measurement solutions for the Refining Industry

    Berthold Technologies radiometric instruments for non-contacting level and density measurement are widely used in the global oil refining industry. Among our customers are well-known companies like Exxon Mobil, Sinopec, Shell, BP, Conoco Phillips, Lukoil and Total – just to name a few. Our measurement ...

  • InlineSENS - Density Measuring Cell

    Density and concentration measurement with low energy gamma radiation. The InlineSENS combines both a radiation source and scintillation detector in one device. Its use of low-energy gamma radiation from an Am-241 or Cm-244 source provides for strong responses to even the slightest change in product ...

  • LB 350 - Online Moisture Analyzer

    Radiometric moisture analyser for representative and robust measurements. On Bulk material. The LB 350 is a moisture measurement system for real-time determination of the moisture content of a wide variety of different bulk materials such as: –  Sinter mixture –  Ore –  Sand –  ...

  • FracSENS LB 6770 Density Meter

    The FracSENS LB 6770 nuclear density meter can connect directly to the control system. Without the transmitter unit, the outputted count rate can be used in the control system to calculate PPA, PPG, or SGU in both low and high pressure applications. The new scintillation technology ensures high sensitivity ...