logo

Back

Xceed™ by XRG Technologies

Fired heaters in refineries and petrochemical plants emit millions of tons of CO2 & NOx every year. Lowering those emissions often causes flame quality issues which can reduce the coil life, run lengths, and capacity of your heater.

Built on 30 years of research, XRG developed the Xceed system to mitigate these issues.

Xceed works with new or existing burners by redirecting a portion of the fuel to the new Xceed nozzles and dispersing combustion to remove hot spots, increase capacity, reduce NOx to SCR levels, and enable up to 100% CO2 reduction.

A reduced peak-to-average heat flux ratio alleviates high-temperature limits enabling increased capacity. Xceed’s improved combustion uniformity significantly reduces NOx allowing you to capitalize on increased efficiency or capacity.

The flexible Xceed system can be easily retrofitted to existing heaters and allows for operation with zero-to-100% dispersed combustion for maximum reliability.

Other Videos

  • Xtend™ by XRG Technologies

    The unique design of Xtend™ causes the flow to swirl inside the tube, increasing the amount of heat transferred. This generates more swirl with less pressure drop compared to a conventional twisted tape. The swirling flow: Cools the film on the tube wall Removes coke precursors from the film Increases ...

  • Large crude heater revamp by XRG Technologies

    A large crude heater in The Netherlands suffered from reliability, fouling and capacity problems caused by flame impingement. In addition to eliminating this bottleneck, the client wanted to increase heater throughput by 29% and increase fuel efficiency to at least 90%.  XRG evaluated the system ...

  • Xceed™ by XRG Technologies

    Fired heaters in refineries and petrochemical plants emit millions of tons of CO2 & NOx every year. Lowering those emissions often causes flame quality issues which can reduce the coil life, run lengths, and capacity of your heater.

    Built on 30 years of research, XRG developed the Xceed ...