logo


Number: 364

Display:

  • ViscoLab PVT+

    High-pressure viscosity analysis. For oil, gas, polymers, and supercritical fluids, ViscoLab PVT+ delivers the highest levels of accuracy, speed, and reliability. In high-pressure processes, correctly analysing precious samples is as challenging as it is critical. With millions of dollars on the line, “close enough” is never good enough, and “soon enough” is never fast enough. Since viscosity is an important factor in the quality and marketability of the fluid, measurements ...

  • ReFRESH™ your Catalyst

    Topsoe´s ReFRESH™ technology offers you the opportunity to use Haldor Topsoe catalysts twice for maximum economic benefit by reactivation of the catalytically active sites. Activity up to 95+ % of fresh catalyst is restored. The technology is commercially proven with more than 65 references and applicable for spent BRIM® and HyBRIM™ catalysts. The ReFRESH™ technology is a specialized method of metal redistribution – available only from Topsoe ...

  • All about excellence in the energy and chemical industry

    KBC exists to help you achieve and sustain excellent operational performance, through the actions of our people, fused with the application of our digitalization technology and best practices, powered by the Cloud.Better decisions - faster, Flawless execution - every time and  Superior results - sustained. Deliver value: Performance assurance Organizations that perform at their best are able to adjust to changing dynamics without compromising competitiveness. KBC ...

  • BLASCH HexWall™

    For sulfur recovery, sulfuric acid plant sulfur burners and spent recovery furnaces. BLASCH HexWall™ is a versatile, mechanically stable system consisting of a series of stackable six-sided blocks incorporating alternating tabs and slots on each side that are designed to ensure the blocks are positively locked together at installation. BLASCH HexWall™ is offered in a highly creep resistant mullite bonded composition designed to resist deformation under load.  

  • DuraTop® Covering layers for catalyst beds for more efficiency.

    DuraTop® special reformed packings are used among other things for covering catalyst beds. DuraTop® special reformed packings can be added onto the top ball layer or even replace the top ball layer. As the top layers on the catalyst beds DuraTop® special reformed packings offer the following advantages: - low pressure drop because of large free-gap volume - good pre-distribution of the liquid and gaseous media, even before they reach the catalyst bed, due to open internal ...

  • Process technology

    Sulzer Chemtech, a member of the Sulzer Corporation, with headquarters in Winterthur, Switzerland, is active in the field of process engineering, employing 3'000 persons worldwide. Sulzer Chemtech is represented in all important industrial countries setting standards in the fields of mass transfer and static mixing with its advanced and economical solutions. Sulzer Chemtech is organized into four business units, one of which is the Process Technology group. This business unit ...

  • KDSOx™

    Cost-effective SOx reduction solution for full-combustion FCC units. Reducing SOx emissions has become increasingly challenging in many parts of the world. Depending on the location, SOx emission limits are defined at the refinery level as bubble limits; at the individual emissions source; or, in some cases, by the concentrations in the atmosphere in the vicinity. In light of these challenges, many refineries have successfully used SOx additives for reducing overall sulfur ...

  • Safeguard packed column efficiency with proper liquid distribution

    Initial liquid distribution directly affects the efficiency of structured and random packing beds. As such, some form of flow test should be conducted to validate distributor performance prior to column startup. Steady state water flow testing is the most common method of testing distributors. It can be conducted in the shop or in the field to verify the design, manufacture and installation. Three Common Types of Liquid Distributor Flow Tests • Liquid Range Test with ...

  • LO-CAT® process as a claus tailgas cleanup unit

    In 1997, Western Gas Resources selected the LO-CAT® process to treat the amine acid gas generated in their Pinnacle Gas Processing plant located in Tennessee Colony, TX. When the facility’s processing demand exceeded the LO-CAT capacity (2 LTPD of sulfur), Western Gas installed another LO-CAT unit having a capacity of 7 LTPD. In the summer of 2000, Western Gas once again forecasted that future processing requirements would dramatically exceed the sulfur removal capacities ...

  • HexEval™ Performance Monitoring Program

    Heat exchanger efficiency is critical to the success of any industrial operation, yet many plants rely on inadequate data to assess the health of their heat exchanger networks. Solenis developed its HexEval™ performance monitoring program to address this issue. Using advanced monitoring and predictive modeling capabilities, this innovative technology enables decision-makers to identify, with confidence, which heat exchangers pose the greatest threat to reliable operation due ...

  • Proper design of mass transfer internals in the FCC flue gas scrubber can help reduce PM emissions

    The EPA’s New Source Performance Standards (40 C.F.R. §60.100-1-0, subpart Ja) regulates refinery particulate emissions, including the discharge of catalyst fines from the FCCU flue gas scrubber stack. Because refiners have traditionally correlated particulate matter (PM) emissions with FCCU cokeburn, high flue gas stack PM can result in reducing severity or throughput in the FCCU at a potentially huge economic cost. The proper selection of mass transfer internals in ...

  • Your trusted business partner for catalyst refining

    Our experienced team and state-of-the-art recycling assets ensure you get the best value for your material and peace of mind with transparency, consistency and integrity in our sampling, assaying, and trading and hedging services. We are proud to be part of your success story. Best Total Precious Metal Returns With our advanced recycling equipment and precise analysis process, you can be confident knowing you’re getting the highest total return from your materials. World ...

  • Enabling Power-to-X Transformations

    For efficient efuels and chemicals production. Our strategy is for a world that is cleaner and healthier, today and for future generations. As the chemical industry embarks on its net-zero journey, we will apply our expertise in decarbonisation and circularity to provide enabling solutions.   This fast paced market requires low risk technologies that can be deployed at scale. Feedstock efficiency, low technology risk, and optimised project execution are key for successful ...

  • Optimising the efficiency of shutdowns and turnarounds to improve processes

    Tracerco’s diagnostic techniques provide you with the invaluable insights you need to reduce your turnaround times and costs by identifying operational process problems and mechanical integrity of internals in real-time and whilst online. Tracerco’s level, density, interface and multiphase nucleonic instrumentation provides invaluable insights to help you make informed decisions to increase profits, manage risks and reduce costs. Making data-driven decisions can significantly ...

  • Decarbonizing process heat with industrial heat pumps and steam compressors

    Industrial energy consumption accounts for about 25% of energy demand and CO2 emissions worldwide, with process heat being the most common application. Hydrocarbon and basic chemical processing plants are particularly process heat-intensive. Heat demand for basic operations distillation and heating of fluids in US industry is about as energy intense as all other industrial heat applications combined. At the same time, there is a vast, unused potential for waste heat in many plant ...

  • Proven decarbonisation pathway for sustainable biofuels and chemicals production from waste

    The flexibility to make use of varying waste streams as feedstocks to replace primary fossil resources is a common goal in operations today. You may be looking at sources such as woody and agricultural biomass, MSW, RDF, SRF, sewage sludge, or non-recyclable plastic to produce bio or circular chemicals or sustainable fuels: Bio Syngas, green hydrogen, SAF, sustainable maritime fuels, or BioMethanol. The key question is how to decarbonize these assets to meet sustainability and ...

  • Introduction to Sinopec Steam Cracking Technology

    Sinopec has been committed to the development and application of steam cracking technology for almost 40 years, and has mastered advanced and complete ethylene technology which can process a variety of feedstocks, including CBL cracking furnace technology, 3 major ethylene recovery technologies (LECT, ART and AERP) and WAO. This webinar will introduce the technology and its applications, with an emphasis on how it can be applied in a variety of plants. By attending, you will ...

  • Introduction to the Sinopec Closed Coke Handling System

    The Sinopec Closed Coke Handling System (S-CCHS) is a safe and eco-friendly closed petroleum coke removal, conveying, and storage system with remote intelligent operation for pollution-free coke removal. This webinar will introduce the technology and its applications, with an emphasis on how it can be applied in your delayed coking unit operations. By attending, you will gain insights into: - Components and operation of the S-CCHS technology - How S-CCHS can eliminate ...

  • Innovative solutions to shape the hydrogen economy

    View this webinar for an insightful journey into the future of sustainable energy with Honeywell H₂ Solutions. In this exclusive webinar, we'll delve into cutting-edge innovations in hydrogen technology, focusing on Blue Hydrogen solutions and Liquid Organic Hydrogen Carriers (LOHC). Attending will offer these valuable benefits: - Discover how Honeywell is leading the way in transforming the energy industry through Blue Hydrogen, a game-changing process that reduces carbon ...

  • Covering your streams with gas chromatography: Analytical technique and key applications

    Gas Chromatography is a critical part of any analytical lab in the refining process. It is such a standard that operators take for granted all the ways it is used. Join us as we will be touching on the importance of GC in the lab, what goes into selecting a unit, and three key applications seen in many labs: Refinery Gas Analysis, Group type Analysis with Reformulyzer pre-frac, and Simulated Distillation. In this webinar we will: - Give an overview of the importance of GC ...

  • Beyond processbook & PI vision: Exploring today’s industrial analytics tools

    In the Manufacturing 4.0 era, industrial organizations have more data at their fingertips than ever, offering the promise of higher production rates, more consistent quality, and reduced costs through data-driven strategies. Standing between many businesses and this promise of process optimization are questions surrounding the right tools to harness this data effectively – a choice complicated by the shifting status of longtime standard OSIsoft’s ProcessBook and PI Vision ...

  • Overcoming roadblocks to decarbonisation

    Reducing global CO2 emissions and limiting the increase in global average temperature to 1.5°C is probably the greatest challenge humanity has ever faced. The continuous increase in strength and frequency of natural disasters accompanied with record-high temperatures have drastically accelerated the need to take action to reduce our carbon impact. There is a global consensus between governments, companies, and the public that there is a need to decarbonise our societies and, ...

  • Biofilm: A hidden threat to refining and petrochemical operations

    Did you know that a seemingly insignificant amount of biofilm can negatively affect heat exchanger reliability and efficiency and, as a result, significantly limit production? Attend this webinar from Solenis to gain valuable insights into risks and solution methodologies for biofilm issues. • Learn how biofilm can affect your profitability and production efficiency • Explore novel technologies from Solenis that mitigate the risks posed by biofilm • Hear about a leading ...

  • Mission critical electric heat tracing solutions to support the energy transition

    Around the globe, clean fuels are helping reduce carbon emissions. And world leaders have pledged to invest in technologies such as carbon capture and hydrogen to help accelerate the clean energy transition. Biofuels, hydrogen, liquefied natural gas and carbon capture technologies are driving the transition to clean fuels and CO2 reduction. This webinar gives you the opportunity to learn how nVent RAYCHEM solutions for the energy transition markets can enable and optimize your ...

  • New digital tools to improve operational profitability in refineries

    View this webinar to learn how you can leverage new digital tools as part of the Honeywell UOP upgraded PremierPLUS Performance Services offering to avoid unplanned downtime, optimize process performance, manage personnel changes, and reduce energy and emissions. The PremierPLUS Performance Services offering addresses these challenges and can improve operational profitability by an average of $1M to $5M per year. Attending this webinar will give you an overview of Honeywell ...

  • Maximizing renewable diesel and sustainable aviation fuel yields with ISOTERRA Technology

    Investments in renewable diesel (RD) and sustainable aviation fuel (SAF) production are gaining considerable momentum and are expected to play a vital role in reducing carbon emissions for heavy-duty transportation. Currently, the majority of these projects focus on the production of HEFA (Hydroprocessed Esters and Fatty Acids). Chevron Lummus Global combines the renewable processing catalyst experience and technology of ART's ENDEAVOR™ catalyst system, CLG's hydroprocessing ...

  • Enabling energy transitions with the Callidus® Ultra Blue® Burner System

    Join this webinar to learn how your renewable energy and net zero operations can dramatically lower nitric oxide (NOx) emissions with the Honeywell Callidus Ultra-Blue Burner system. Fuels are changing in order to meet corporate commitments to carbon reduction and net zero goals. As your operations use more hydrogen and renewable fuels, production of nitric oxide is increasingly scrutinized in both external regulations and internal emissions targets. Attending this webinar ...

  • Excel® Technology: The Sustainable Solution for HydroProcessing Catalysts

    Unveil the path to sustainable catalyst processes with Excel® Rejuvenation Technology! Join us as we delve into the art of catalyst rejuvenation, uncovering the means to propel your processes towards enhanced sustainability and waste reduction. Learn how to steer your operations away from wasteful practices and embrace sustainability using Evonik's Excel® Hydroprocessing Catalysts solutions. Our certified Life Cycle Assessment (LCA) lays bare the potential emissions you can ...

  • Developments and solutions for renewable fuels testing

    Regions and nations around the world are swiftly translating their climate targets into investments in renewable energy and fuel production. This necessitates a multifaceted approach and innovative solutions. Join us for this webinar as we report on the latest developments in the renewable fuels industry, with a particular focus on the transportation sector. We will discuss a range of renewable fuels, including SAF, ethanol, biodiesel, hydrogen, and their derivatives, while exploring ...

  • Structured Catalyst for Steam Methane Reforming

    Join this webinar to learn about the benefits of ZoneFlow Structured Catalyst for Steam Methane Reforming. Honeywell UOP and ZoneFlow Reactor Technologies recently conducted pilot plant testing of the ZoneFlow Structured Catalyst in a large-scale pilot plant at Université Catholique de Louvain in Louvain-la-Neuve, Belgium. In this free webinar, you will have the opportunity to learn about the technology and benefits that were seen in the pilot test run at near-commercial levels: •   ...

  • Improved H2 purification and recovery with UOP Polybed™ Pressure Swing Adsorption

    Pressure Swing Adsorption (PSA) is the industry standard for H2 purification and long-term, reliable recovery. Honeywell UOP’s PSA technology is relied on by refineries and hydrogen producers worldwide, with more than 1,100 systems installed in over 70 countries. In this webinar, you will have the opportunity to gain valuable insights: - Understand what makes Honeywell UOP Polybed™ PSA purification technology unique. - Learn about recent changes in Honeywell UOP’s ...

  • Navigating Complexities of Renewables Processing

    Refineries are shifting away from producing traditional fuels to remain relevant, compliant and profitable. Join us to learn more about recent developments in renewable feedstocks processing. In this webinar from Ketjen, you will gain an understanding of the regulations and drivers that shape the renewables market. You will also have a chance to learn about operational challenges you may face while processing feedstocks with various amounts and grades of HVO or waste plastic ...

  • Fundamentals of Safe Liquid Grab Sampling

    Every day, grab (or spot) sampling systems allow oil, gas, and chemical companies around the world to simply and accurately determine the quality and composition of the fluids they process. In many cases, however, opportunities remain to improve the ease-of-use, safety, and maintenance requirements of these system by rethinking aspects of their design. In the case of panels that draw liquid samples into laboratory bottles, changes to valve assembly designs, specifically, can yield ...

  • Economics of Decarbonisation with Honeywell Sustainability Portfolio and IRA

    The Inflation Reduction Act (IRA), passed by the US government on August 16, 2022, provides nearly $370B in clean energy and climate funding over the next decade There has never been a better time to invest in a more sustainable future. Our upcoming webinar will provide valuable insights into key IRA provisions and enabling technologies to accelerate industrial decarbonisation and achieve your long-term financial and sustainability goals. This webinar will offer an incredible ...

  • Applying Crude to Chemicals technologies for effective petrochemicals production

    With the consumption of petrochemicals increasing globally and the demand for transportation fuels under pressure from energy transition initiatives, refiners are being driven to optimize their facilities and explore revenue streams outside of the traditional transportation fuel value chains. There are several alternatives and methodologies to capture additional value from crude oil through conversion into petrochemicals to consider. This webcast covers: - How to convert a ...

  • A new perspective on improving process and operational efficiencies

    Presented with ageing equipment and ever-increasing environmental restrictions, process engineers are challenged with maximizing efficiency and mitigating problems. Without the necessary information, facing this challenge can be difficult or impossible. Tracerco provides you with the insights you need to help troubleshoot production problems and optimise processes. With the widest range of scanning and tracer diagnostic services on the market, Tracerco helps the refining and ...

  • A complementary and holistic approach using mobile water solutions

    High water quality across petroleum refining and petrochemical industries is an integral part of every process, including cooling tower make-up and blowdown, desalination, filtration. Additionally, these industries unavoidably generate large volumes of wastewater. The growing demand combined with the increasing water stress and stricter regulations is creating a situation where water is becoming not only costlier but also a more valuable resource. This is leading companies ...

  • Preparing for a petrochemical plant revamp or technology upgrade

    Petrochemical producers have recently confronted unprecedented volatility in crude oil prices and limits on advantaged feedstock, while the refining and gas sectors remain vigilant to global supply conditions. However, some industry challenges remain unchanged, such as the need to optimize plant operations and cut carbon footprint by reducing the amount of energy required to drive a plant. Equipment nearing the end of its operational life can not only put plants at risk of ...

  • Elemental Analysis for Refining and Petrochemicals

    Seamless Laboratory and Process Analysis for Total Sulfur and Nitrogen. As expected shifts to petrochemical and crude oil-to-chemicals (COTC) projects expand through 2050, the need for elemental analysis in refining and petrochemical continues to grow. Refiners must meet stringent requirements due to the increase of nitrogen and sulfur in the crude, requiring more focus on processing and control. Join us to learn about laboratory and process analysis for total sulfur and nitrogen. During ...

  • How grab sampling can help improve your plants safety

    While grab sampling can be a dangerous and hazardous process for both operators and their surrounding environment, too often safety takes a back seat to other day-to-day considerations. If this sounds familiar, tune into this sponsored webinar. It's your opportunity to focus on areas in your plant where safety is a concern and learn methods for ensuring sampling that is not only safe and effective, but also representative.   In this webinar, you'll examine hazards associated ...

  • Optimizing the value of your unloaded catalyst

    The metals contained in spent catalysts offer a valuable follow-on revenue source, but how can you be sure to achieve a fair settlement or receive top dollar? You also need to balance demands of sustainability and lowered environmental impact with ease of recovery and settlement. This webinar gives you an introduction to the precious and base metal management cycle in catalysts and specifically provides you with tips for ensuring a high quality and accurate precious metal settlement, ...

  • Unleash the potential of your Naphtha Steam Cracker

    The global ethylene market grows at 3.0-3.5% annually, which amounts to 6-7 MM MTA increase in demand every year.  Greater than 95% of ethylene is produced using steam cracking. The two of the main feedstocks for steam crackers are naphtha and ethane with each supplying >45% of all ethylene production. Ethane cracking tends to have lower Cash Cost of Production, supply is regional and insufficient to meet the global ethylene demand.  Naphtha cracking has several disadvantages: ...

  • CDU desalter processing with interface control

    In this webinar, you will find out how Tracerco’s advanced multi-phase nucleonic instrumentation can analyse desalter performance and improve crude blending capacity. Discover opportunities to: - Improve environmental impact, compliance and energy usage - Reduce unplanned trips and downtime - Optimise chemical dosing (demulsifiers/neutralisers) - Reduce overhead corrosion, as well as catalyst deactivation in FCC - Improve process control enabling data driven insights With ...

  • An introduction to Sinopec Hydrocracking Technologies

    This webinar gives you an overview and understanding of hydrocracking and its applications, with an emphasis on technologies and catalysts developed by Sinopec and its research arm, Sinopec Fushun Research Institute of Petroleum and Petrochemicals (Sinopec FRIPP). You will first get an introduction to hydrocracking including feed processing and target output products. Commercial considerations include market share and reference installations such as 40 hydrocracking units designed ...

  • How turbomachinery can support decarbonization

    With the hydrocarbon processing industry’s efforts to decarbonize, hydrogen and Carbon Capture Utilization and Storage (CCUS) have further moved into focus as viable alternatives for transforming existing energy markets. Both hydrogen and CO2 provide ample opportunities to be used in hydrocarbon processes either in molecular form or as feedstock. At the same time, the unique physical properties of both hydrogen and CO2 can make them a challenge for process equipment such as ...

  • Technologies to enhance Ethylene production

    In this presentation, three technologies will be introduced. This first is swirling element radiant tube (SERTTM) technology for steam cracking furnaces. In this technology, you will find how heat transfer theory is applied to overcoming the challenges of cracking pyrolysis to meet targets. Successful commercial cases will demonstrate the technical advantages of SERTTM technology. Cracking furnaces with SERTTM technology have longer operating days, lower tube wall temperature ...

  • Steam Cracker recycle processing and product upgrade options

    LPG and light naphtha generated in a refinery complex (from both straight-run and conversion units) are sent to the ethylene cracker as feedstock. There is more i-paraffin than n-paraffin in LPG and light naphtha generated from a hydrocracker and reformer, in particular, i-butane and i-pentane. When cracking i-paraffin and n-paraffin separately in an ethylene cracker, the yield of ethylene and propylene is different; n-paraffin can generate 20wt% of “ethylene + propylene + butadiene” ...

  • Advances in benzene derivatives production

    Xylene and ethylbenzene are important benzene derivatives. In this presentation, you will learn about recent advances in the production process and catalysts of xylene and ethylbenzene. Xylene production is one of the most important aromatic producing processes. You will learn the details of process technology introduction and catalyst features of aromatics transalkylation developed by Sinopec, as well as the process strategies of raw material expansion, Inferior feed tolerance, ...

  • Deep catalytic cracking technology for maximizing the production of chemicals

    Optimization of light olefins (including ethylene, propylene and butene) production has become one of the most competitive options for refiners in the transition. Compared with conventional FCC, FCC technologies which optimized propylene production are helping refiners to restructure their product configuration, from fuel to petrochemical production. You will learn some successful commercial cases, which are aimed to help refiners to select the most suitable and competitive ...

  • Decarbonization with hydrogen solutions

    Demand for hydrogen is expected to increase up to ten-fold by 2050 when multiple industry reports predict 8-24% of the world's final energy demand will be supplied by hydrogen. Hydrogen has a unique ability to address and ˜hard-to-decarbonize' sectors including refining, chemicals, steel, heating, long-haul transport, and long-term power storage and all of which currently produce significant CO2 emissions. To achieve this, hydrogen must be produced with significantly lower carbon ...

  • Enabling circularity via plastics chemical recycling

    Chemical recycling of plastics is an emerging route to supplement mechanical recycling since polymers can be converted into monomer form.  As opposed to mechanical recycling, wherein the polymer properties degrade with each cycle, the monomers can be re-polymerized without any polymer property degradation. Petrochemical and refining operations of the future will include more plastics oil, obtained from chemical recycling, in the feedstock mix to establish circularity in the ...

  • Best Practice: Screening and QC testing of petroleum products and fuels

    Screening and quality control of petroleum products and fuels can be a tedious and expensive process when performed utilizing traditional methods. Near-Infrared spectroscopy (NIRS) as described in ASTM Guidelines E1655, D8340, and D6122 is a much faster method providing results in just 30 seconds without any solvents and reagents needed. In fact, NIRS has  become the preferred method of numerous producers to quickly quantify key parameters in petrofuels and petrochemicals ...

  • Understanding alarm management standards

    Alarms are an essential layer of protection, enabling industrial facilities to avoid abnormal situations that may put people, the environment, and profits at risk. As such, numerous standards and guidelines exist that can assist organizations in designing, implementing and maintaining alarm systems that comply with regulations. ISA 18.2, EEMUA 191, IEC 62682, API 1167 — how should organizations select these standards and guidelines? How can they be put into practice? Join ...

  • How to maintain production without your water treatment plant

    This webinar reaches out to downstream plant managers, facing an increasing challenge from their ageing assets including water treatment plants. Ageing plants may impact continuity of production. When a plant is not reliable or efficient, emergency maintenance is often required to avoid disruption to production which could result in costly downtime for operating sites. This presentation demonstrates how the rental service from Veolia’s Mobile Water Services, can safely provide ...

  • The case for plant modernization and upgrades

    With a system that's outdated or showing signs of it, you are well aware of the risks of running your plant processes with aging hardware and software. Waiting to modernize will impact your cost of ownership due to shortages of critical parts and support, will increase risk of an unplanned production shutdown, and likely will have no incremental benefits. A well-designed modernization approach allows the opportunity to reduce system footprint and costs. Whether by eliminating ...

  • How turbocompressors drive and safeguard downstream plant operations

    This webinar reaches out to end users in the hydrocarbon industry who face the challenge of achieving operational availability, equipment reliability, and efficiency in their plants. These factors are crucial for end users, with many complex and intricate processes operating in parallel. Compression technology drives and safeguards many of these processes. Presenter Ulrich Schmitz will put particular focus on different chemical/petrochemical and refinery, syngas, and LNG applications. ...

  • How to achieve operational excellence with safe and profitable operating windows

    Plant of the Future’ is making headway towards operational excellence using technologies that enable safe and efficient operations to improve your bottom line and reduce OPEX expenses. Operations Management provides the foundation needed to enable operations excellence. In this presentation, we’ll show you the tools we’ve designed to manage and control critical limits, shift handovers, and process deviations. You are going to learn: - How Honeywell Forge Operations ...

  • Learn how to build refinery models quickly and easily to support your LP model

    In this webinar we will present refinery modelling workflows, features and functionalities, which showcase Honeywell Forge Process Simulation’ refinery-wide flow sheeting capabilities. These capabilities span the beginning-to-end design, use, and exporting results of a refinery model.   First, attendees will see how easy is to create a model from scratch utilizing our Process Simulation 'drag & drop' refining reactor templates. Finally, we will showcase the product ...

  • Ensuring business continuity in industrial operations

    Join this webinar to discover the multiple areas in your organization where Honeywell Forge can help ensure the reliability, efficiency, and safety of your refining operations. We will explore cases from asset performance management and process optimization to remote worker performance and competency solutions.   The new normal is here to stay. Uncertainty is the new name of the game; however, resilience should also be a key player. How are you ensuring the reliability, ...

  • A layered approach to achieving plant-wide optimization goals

    Join this webinar to discover the multiple areas in your organization where Honeywell Forge can help ensure the reliability, efficiency, and safety of your refining operations. We will explore cases from asset performance management and process optimization to remote worker performance and competency solutions.   The new normal is here to stay. Uncertainty is the new name of the game; however, resilience should also be a key player. How are you ensuring the reliability, ...

  • Driving machine learning through fundamental machinery diagnostics

    Join Honeywell’s APM specialist, Ben Berwick, as he discusses how Honeywell leverages Asset Performance Management technology to recognize the earliest onset of rotating machinery issues. The rapid pace of predictive analytics, artificial intelligence and digital twins for industrial assets is proving revolutionary in how asset intensive organizations benefit from the actionable information provided by asset performance management (APM) software.  A key element in deriving ...

  • High-Performance Tail-Gas Treating

    Discover the benefits of applying the latest technology in modern, low-temperature Shell Claus offgas treating (SCOT™) units. See how next-generation, low-temperature SCOT catalysts can help extend cycle life, lower energy costs and ensure regulatory compliance, even with the most difficult feeds and conditions. In this webinar you will: - Learn why modern tail-gas treating units are being designed without an inline burner, and the impact this has on inlet temperatures and, ...

  • Simplify crude assay importing in UniSim design by utilizing H/CAMS

    Haverly H/CAMS is the industry leading assay crude management software with over 2000 assays. Honeywell's UniSim Design software links to Haverly H/CAMS via a COM interface and allows you to import proprietary assays with just a few clicks. This functionality increases engineering effectiveness, eliminates the need for manual data entry, and makes it easier to model crude storage facilities and refining processes. Presenters: Jagdish Rachh - Honeywell David Alexander - Haverly Moderator: Ken ...

  • Intelligently predict and manage sour water corrosion in refinery applications

    One of the primary concerns in refinery operations, especially when processing sour crudes, is management and mitigation of NH4HS (Sour Water) corrosion in hydrocrackers, hydrotreaters, FCC and other unit circuits. Honeywell's Predict-SW software, a byproduct of more than 15 years of intense Joint Industry Project (JIP) research, provides an easy to use framework to quantify NH4HS corrosion as a function of key process parameters across the refinery value chain for commonly used ...

  • Understanding the financial impact of a collapsed flue gas tunnel in your SMR

    The overall influence of tunnels on the flue gas flow in a steam methane reformer has been modeled and documented, and the concept that running a reformer without tunnels can decrease overall efficiency is well understood in the industry. The study detailed in this webinar focuses on the effects of operating a reformer after removing just a single tunnel, leaving the rest in place. The resultant flue gas flow field is analyzed by looking at temperature profiles, residence time ...

  • Maximising naphtha through hydrocracking: Refinery of the future

    Globally the demand for petrochemicals is increasing at rates nearly 1.5 times GDP. In regions where there is a heavy investment in large-scale para-xylene capacity there is a significant demand for naphtha. However not all naphtha is suitable to produce aromatics. Heavy naphtha is required, but it is in limited supply. This is where the Honeywell UOP UnicrackingTM process becomes the key enabler to petrochemical production. By installing one, or a combination of Unicracking ...

  • Towards Your Low-Carbon Refinery

    This On-Demand webcast from Shell Catalysts & Technologies, discusses proven technologies for capturing CO2 from both low and high-pressure streams.  Are You…  - Under pressure to reduce your carbon footprint?  - Looking for ways to cost-effectively reduce your CO2 emissions?  - Unsure which carbon-reduction solutions will be most appropriate for your facility? Any serious ambitions to reduce a facility’s carbon intensity are likely to be spearheaded ...

  • Intelligently predict and prevent corrosion across your operations

    Learn how the fight against corrosion never stops - it is a fact of life every day across Oil & Gas, Refining and Pipeline operations, what-if you could have insight into real-time corrosion rates in your process? Honeywell Predict® Corrosion Suite provides the next generation of corrosion management solutions, intelligent software providing real time corrosion quantification. Unlike conventional corrosion management methods, unique prediction models are employed that ...

  • From hydrogen production to sulphur recovery - let ceramics pave the way

    Learn how to boost the reliability and performance of your hydrogen production and sulphur recovery plants through the deployment of Blasch’s proven ceramic systems. Benefits include: - Higher plant reliability and much longer run-lengths - 60 -90% faster installation times - Capacity increase - Annual energy savings of several hundred thousand dollars for SRUs - Lower emissions   Flue gas tunnels in Steam Methane Reformers warp and fail causing non uniform flow ...