logo

Back

DuraTop® und DuraFlow – Inert Covering Material and Pressure Drop-Reducer

DuraTop® and DuraFlow are used for the covering of catalyst and catalyst carriers (Duranit® inert balls) and are applied to the upper ball layers. In addition, it is possible to apply the two Pressure Drop-Reducer at different levels of the catalyst support bed or even to replace the upper spherical layers in an energy-saving manner.

DuraTop® and DuraFlow are of course available in different sizes.

In addition these products offer the following advantages:
• Good pre-distribution of liquid and gaseous media
• Reduction of pressure drop
• Increased reduction of any particle impurities of the media before they reach the catalyst bed

DOWNLOAD LITERATURE

View More

  • VFF Products

    VFF supplies a wealth of column-related products and consultation services for the most diverse applications e.g.: • Absorption • Desorption • Distillation • Extraction • Drying • Cooling • Humidification • Water treatment • Droplet separation (demisters) • Desalination • Heterogeneous ...

  • VFF-Twin-Pak®

    Extremely low pressure drop with best mass transfer. The VFF-Twin-Pak®, a VFF-patent, is an entirely newly developed high-performance metal tower packing with a profile that comes close to the structured packings, while not doing without the numerous advantages of a tower packing. Its form combines ...

  • VFF-Power-Pak®

    The VFF Power-Pak®, a VFF-patent, is a completely newly designed high-performance tower packing in ceramic with a similar profile to structured packings but which retains all the many benefits of random packings. Its innovative shape developed by VFF leads to an extremely low pressure drop with an impressive ...

  • VFF - your expert for maritime exhaust gas treatment

    For decades, Vereinigte Füllkörper-Fabriken (VFF) has successfully supplied tower packings and internals made of a wide variety of materials worldwide for a wide range of applications in the chemical, petrochemical and pharmaceutical industries, in environmental technology, plant construction and ...

  • DuraTop® Covering layers for catalyst beds for more efficiency.

    DuraTop® special reformed packings are used among other things for covering catalyst beds. DuraTop® special reformed packings can be added onto the top ball layer or even replace the top ball layer. As the top layers on the catalyst beds DuraTop® special reformed packings offer the following advantages: - ...

  • DURANIT® Maximum compression strength for maximum operational safety

    When using catalyst supports, a high degree of operational safety through stability and homogeneity of the support material is an important factor for the customer. The specially developed manufacturing process from VFF means that the compression strength of the Duranit® X500 inert balls is significantly ...

  • Droplet Separators (Demister)

    For many decades, VFF droplet separators have been successfully used in a large variety of applications and design forms – up to 18 m in diameter. Wire mesh droplet separators (Demister) are used for the removal of small liquid droplets (aerosols) from exhaust gases, exhaust air and steam. VFF’s ...

  • VSP®-V High performance tower packing with lowest pressure drop

    The VSP-V is the updated version of VFF’s world wide known random packing VSP. The VSP-V offers high performance in plastic with top mass transfer and lowest pressure drop and is easy to handle during column loading and emptying.

  • VFF-NetBall®: High-performance in the shape of a ball

    The VFF-NetBall® a plastic random packing  has been devised by VFF's research and development division and sets new standards in absorption and desorption. Its favourable flow profile, combined with a high specific surface, offers top mass-transfer properties with an extremely high hydraulic load ...

  • DuraTop® und DuraFlow – Inert Covering Material and Pressure Drop-Reducer

    DuraTop® and DuraFlow are used for the covering of catalyst and catalyst carriers (Duranit® inert balls) and are applied to the upper ball layers. In addition, it is possible to apply the two Pressure Drop-Reducer at different levels of the catalyst support bed or even to replace the upper spherical ...

  • Responsive image Reciprocating compressor solutions for refineries
  • Responsive image BASF Refinery Solutions on LinkedIn
  • Responsive image Air grid nozzles for fluid catalytic cracking units
  • Responsive image Becht fired heaters services
  • Responsive image ITW technologies online cleaning
  • Responsive image RVP in process
  • Responsive image Valves and Pumps for the Energy Industry
  • Responsive image Worldwide refinery processing review
  • Responsive image Custom Catalysts
  • Responsive image Data governance consulting services