logo


Number: 85

Display:

  • InlineSENS - Density Measuring Cell

    Density and concentration measurement with low energy gamma radiation. The InlineSENS combines both a radiation source and scintillation detector in one device. Its use of low-energy gamma radiation from an Am-241 or Cm-244 source provides for strong responses to even the slightest change in product composition , with extremely low dose rates. Features for high demands The isotope Am-241 or Cm-244 is used as the radiation source. The advantage: Am-241 and Cm-244 have very ...

  • Insight through instrumentation

    Get the measure of your process. Tracerco offers a range of advanced nucleonic instrumentation including products for level, density, phase and interface measurement. Our unique instruments provide nonintrusive, real-time solutions for downstream petrochemical, upstream oil and gas and subsea operations, bringing clarity and understanding to customers’ assets. With enhanced self-diagnostics and low maintenance costs, our instrumentation boasts unrivalled safety, stability, accuracy ...

  • Integrated solutions for CEMS

    Gas analysis plays an essential role in cleaner industrial operations for plants and refineries, helping to ensure more efficient processes, support the safe removal of pollutants, and monitoring the harmful emissions to the atmosphere. A high-performance continuous emissions monitoring system (CEMS) is crucial to the safety and efficiency of a wide range of industrial processes, and an essential part of clean air strategies. CEMS installations must offer the highest sensitivity ...

  • Interface and Multiphase Level Measurement

    Radiometric measurements from Berthold. The radiometric measurement systems from Berthold are used to localize the interface layer between two phases. These systems are even used in more complex processes to measure the density profile and thereby picturing the heights of the different product layers inside the vessel. In this way the characteristic of the emulsion layer can be monitored as well. The measurements are primarily applied in chemical plants and in the oil & ...

  • ITW Online Cleaning

    Will revolutionize turnaround operations and operational excellence by optimizing: productivity, operability, safety health and environment, reliability, product quality, energy efficiency, CO2 SOX NOX VOC emissions, maintenance and repair and operational requirements. An entire Unit can be ITW Online Cleaned in as low as 24 hours on an oil-to-oil basis, including all the equipment and not only the relevant one, without the need of opening it. ITW Online Cleaning a Unit in ...

  • JFTOT® IV

    The worldwide recognized leader of jet fuel thermal oxidation testing. PAC’s Alcor JFTOT® is the globally recognized standard for jet fuel thermal oxidation testing with a worldwide installed base over 1000 instruments. With the Next Generation JFTOT IV PAC brings an industry leading product and adds enhanced safety features and simplified operational capabilities in a smaller, streamlined package that significantly increases operator productivity. The Alcor JFTOT IV ...

  • Lance Scope™ Hot inspection service

    Avoid Furnace Shut Down with Online Fired Heater Inspection. Is there an issue with your high temperature fixed equipment, but you can’t see the cause, or the exact site? We designed and developed Cetek’s Lancescope™ fired heater inspection tool for just this situation. It allows to undertake a high temperature furnace inspection to determine the scope of the problem, often avoiding an expensive shut down of the heater. Cetek’s Lancescope™ system provides real-time, ...

  • LB 350 - Online Moisture Analyzer

    Radiometric moisture analyser for representative and robust measurements on bulk material. The LB 350 is a moisture measurement system for real-time determination of the moisture content of a wide variety of different bulk materials such as: * Coke * Sinter mixture * Ore * Sand * Building material

  • LB 476 Level+ the solution for the most challenging processes

    The LB 476 Level+ system adds that little extra to radiometric level measurements, which makes it the perfect system for challenging processes. By using the outstanding implemented compensation functions, level measurement falsifications, e. g. due to gas density fluctuations or due to product build-ups, belong to the past. Compared to the classic radiometric level measurement, LB 476 Level+ enables the storage of two calibration curves and, beyond, the simultaneous monitoring ...

  • LB 6775 Detector

    Detector with state-of-the-art SiPM technology for integration in Multiphase Flow Measurement systems.

  • Level control in coking units

    You want to improve the utilization of the drum capacity? Due to the conditions in the coke drum, a level measurement is a very challenging task. Where other measuring technologies tend to fail or end up being extremely unreliable, Berthold‘s radiometric level technology is ideal for monitoring the coke level due to its non-intrusive nature. With Berthold’s solution for delayed coker units operators have a high repeatable and long-term stable measurement to increase the throughput ...

  • Magnetic level technologies

    Unparalleled technology with uncompromising standards. In 2001, Orion Instruments set a course to raise the standards by which magnetic level indicators (MLIs) are viewed. As an AMETEK company whose level and flow solutions have been trusted worldwide for more than 80 years — Orion’s products are engineered and manufactured under the same strict and unyielding standards. A Magnetic Level Indicator (MLI) consists of 3 major components - Chamber - Float - Indicator How ...

  • Magnetrol / Orion Instruments product line quick reference

    The legacy of Magnetrol traces back to 1932 with Schaub Engineering, marking the birth of the first magnetic liquid level switch, a breakthrough that transformed level control within boiler and feedwater systems. Through its evolution, Magnetrol has set the industry standard for reliable Level and Flow Measurement Solutions, guided by transformative leaders like Judy G. Stevenson, who became owner of the company in 1975. Launched by Magnetrol in 2001, Orion Instruments has ...

  • Covering your streams with gas chromatography: Analytical technique and key applications

    Gas Chromatography is a critical part of any analytical lab in the refining process. It is such a standard that operators take for granted all the ways it is used. Join us as we will be touching on the importance of GC in the lab, what goes into selecting a unit, and three key applications seen in many labs: Refinery Gas Analysis, Group type Analysis with Reformulyzer pre-frac, and Simulated Distillation. In this webinar we will: - Give an overview of the importance of GC ...

  • Developments and solutions for renewable fuels testing

    Regions and nations around the world are swiftly translating their climate targets into investments in renewable energy and fuel production. This necessitates a multifaceted approach and innovative solutions. Join us for this webinar as we report on the latest developments in the renewable fuels industry, with a particular focus on the transportation sector. We will discuss a range of renewable fuels, including SAF, ethanol, biodiesel, hydrogen, and their derivatives, while exploring ...

  • A new perspective on improving process and operational efficiencies

    Presented with ageing equipment and ever-increasing environmental restrictions, process engineers are challenged with maximizing efficiency and mitigating problems. Without the necessary information, facing this challenge can be difficult or impossible. Tracerco provides you with the insights you need to help troubleshoot production problems and optimise processes. With the widest range of scanning and tracer diagnostic services on the market, Tracerco helps the refining and ...

  • Elemental Analysis for Refining and Petrochemicals

    Seamless Laboratory and Process Analysis for Total Sulfur and Nitrogen. As expected shifts to petrochemical and crude oil-to-chemicals (COTC) projects expand through 2050, the need for elemental analysis in refining and petrochemical continues to grow. Refiners must meet stringent requirements due to the increase of nitrogen and sulfur in the crude, requiring more focus on processing and control. Join us to learn about laboratory and process analysis for total sulfur and nitrogen. During ...