Profiler™ GPS

Level, interface and multiphase measurement. The Profiler™ GPS provides a ‘window’ into the vessel to enable the operator to improve production throughput, reduce the number of unscheduled shutdowns and achieve significant cost savings. The Profiler™ GPS has no moving parts and is installed in some of the most challenging and diverse applications, ranging from subsea oil and gas processing, to downstream refining. Key features - Extremely reliable with zero moving ...

Valmet Flowrox Valve Solutions

Flowrox™ solutions entail more than 45 years of experience in flow and process control and elastomer technology. Flowrox™ valves and pumps are designed for demanding process conditions in a variety of process industries, especially in the mining, minerals processing, metallurgy, construction, energy, environment, and chemical industries. We provide pinch and slurry knife gate valves for flow control. Flowrox™ pinch valves can be either used for shut-off (also known as ...

FracSENS LB 6770 Density Meter

The FracSENS LB 6770 nuclear density meter can connect directly to the control system. Without the transmitter unit, the outputted count rate can be used in the control system to calculate PPA, PPG, or SGU in both low and high pressure applications. The new scintillation technology ensures high sensitivity and allows drastic reduction of source activity compared to conventional ion chamber detectors. A maximum of 20 mCi has proven sufficinet for traditional fracturing applications. With ...

Condensate is crude

Ultra-light crudes and condensates are here to stay. These streams have flooded the market in recent years, and many of them are deeply discounted against reference crudes. Refiners have been processing increasing percentages of this light material through their Crude Distillation Units (CDUs) up against unit naphtha handling limits. On the surface, processing condensate and other ultra-light crudes with high API gravity and low sulfur should be easy. In reality, many refiners ...

Optimisation of a sulphur recovery unit

Prior to Suncor’s purchase of the Spirit River facility, little attention was given to the LO-CAT® unit. In general, over injecting chemicals into a LO-CAT unit will not result in operating problems, just higher than required operating costs. Consequently, in remote gas plants such as Spirit River, it is sometimes difficult to convince operators to change operating conditions if the unit is not presenting any operating problems. However, this is not Suncor’s operating ...

Caustic services

For 65 years, Merichem has provided environmentally responsible handling of spent caustics and other secondary materials that result from refining, natural gas and petrochemical processing. Merichem Caustic Management Services safely transports your secondary materials to Merichem manufacturing facilities – as feedstocks for chemical manufacturing or as process chemicals to other end-users. We handle spent streams as non-waste activity, reducing your reportable wastes. Why ...

Tracerco Diagnostics™ Distribution study - FCC stripper

Uniform distribution of catalyst and steam in a stripper is critical to achieve high stripping efficiency (less carry-down of hydrocarbon products from reactor to regenerator). A failure to effectively remove hydrocarbon from the catalyst will result in a loss of product, lower throughput, and lower catalyst activity due to increased regenerator bed temperature. The Field Test Tracerco was contacted to conduct distribution studies for a leading refiner that was experiencing ...

Nsure

Determine total sulfur and total nitrogen in a single analyzer. With its large installed base, Antek by PAC has proven to be a global leader in lab and on-line elemental analysis instrumentation. Antek pioneered total sulfur and total nitrogen analysis utilizing pyro-fluorescence and pyro-chemiluminescence technology. NSure, uses the same proven technology of its previous model –the 6200– to ensure lab accuracy with process robustness. By utilizing the same technology that ...

Tracerco Diagnostics™ Flow Study

What does a Tracerco flowrate study do? Tracerco Diagnostics™ Flow studies measure flowrates through flare lines or piping systems, monitor process changes over start-up/shutdown cycles, and determine leakages past relief or block valves. Our flow study technology offers a rapid, accurate, and cost-effective method of determining flows of gas, water, and organicbased materials. What type of tracer materials are used to perform thetesting? Tracerco’s team of experts will ...

Are you ready for MARPOL?

As the International Maritime Organization (IMO) has decided to implement the MARPOL Annex VI, all ships must globally reduce their emissions of sulfur by 86% before 2020. This fact is bound to have a huge impact on the shipping as well as the refinery industry. But exactly what will happen? What options are there? What are the opportunities? Who will seize them? And how?   The MARPOL directive presents great opportunities for refineries. Whether you want to produce MARPOL ...

PAC solutions for biodiesel

Biodiesel is a first-generation biofuel generated from vegetable oils, including soybeans, rapeseed (canola) and palm. With the ability to reduce lifecycle greenhouse gas (GHG) emissions by as much as 50% compared to fossilbased fuels, biodiesel fits well into the global ambition for clean fuels. Also known as FAME (fatty acid methyl ester), biodiesel is produced by the process of transesterification using biological feedstock, such as food crops, or latter-generation feedstock ...

Separation technology

Sulzer Chemtech produces a wide array of tower internals. With this broad spectrum of custom-designed fractionation trays, random and structured packing we can meet any process requirement in any size tower throughout the chemical, refining, petrochemical, and gas processing industries. For over 50 years, Sulzer Chemtech has been serving these industries with our innovations, which set a new standard in many applications. For classical column operations such as distillation, ...

DuraTop® und DuraFlow — Inert Covering Material and Pressure Drop-Reducer

DuraTop® and DuraFlow are used for the covering of catalyst and catalyst carriers (Duranit® inert balls) and are applied to the upper ball layers. In addition, it is possible to apply the two Pressure Drop-Reducer at different levels of the catalyst support bed or even to replace the upper spherical layers in an energy-saving manner. DuraTop® and DuraFlow are of course available in different sizes. In addition these products offer the following advantages: - Good pre-distribution ...