Separators - real time information on bulk level, phase heights and internal hardware

Our solutions help you to optimise your separator operation and maintenance by providing accurate, real time information on bulk level, phase heights, emulsion and internal hardware. Tracerco’s, non-intrusive gamma scan technology provides accurate, real time information on the ...

Becht Reliability

Sustained long term reliability of facilities is a key to safety, profitability and competitiveness. History shows that differences in operating expenses between best-in-class refineries, and poor performers, can be as much as 20-30MM$/YR. The cost of unreliability also impacts on lost ...

Tracerco Nucleonic Instrumentation

At Tracerco, we help you see things you wouldn’t normally see. We do it by measuring the unmeasurable and accessing the inaccessible. Our customisable range of award-winning nucleonic instrumentation provides reliable phase, level and density measurements, allowing you to see inside ...

European project for the capture and storage of CO2 on an industrial scale

The “3D” (DMX Demonstration in Dunkirk) project ambition is to validate replicable technical solutions and to achieve industrial deployment of Capture & Storage technology around the world. It should play a major role in enabling industries with high energy consumption and CO2 ...

Gas Flow & Heat Transfer in Catalyst

Magcat spheres produce a more uniformed gas flow maintaining good  gas-to-catalyst contact throughout the bed.

Reforming Tubes - Catalyst

Due to the drop in level of the catalyst, most tubes require topping up over their 5-20 cycles. With Magcat the level does not drop as extensively and they maintain their uniformity.

Xceed™ by XRG Technologies

Fired heaters in refineries and petrochemical plants emit millions of tons of CO2 & NOx every year. Lowering those emissions often causes flame quality issues which can reduce the coil life, run lengths, and capacity of your heater. Built on 30 years of research, XRG developed the ...

Axens AdvaMEG® solution for MEG regeneration and reclamation

Different types of schemes are available as part of AdvaMEG® solution such as conventional regeneration, integrated and slip stream scheme. Here is a focus on the integrated scheme.

Axens SmartSulf® - Up to 99.7% sulphur recovery without TGTU

A breakthrough sulfur recovery technology based on sub-dewpointing Claus process that can substitute a conventional Claus plus Tail Gas Treatment Unit with a more compact solution.

HELIMAX™ Ultra-Efficient Electric Heat Exchanger

The HELIMAX™ is a next generation heat exchanger with Continuous Helical Flow Technology™ that enables ultra-high heat transfer unlike large, traditional heat exchangers with dead zones. Fluctuations within the heat exchanger to either the sheath temperature or the localized flow rate ...

Neles™ XH ball valve – Forward-thinking design

The needs and desires of our customers are the foundation for this comprehensive product family. It has been designed to deliver ease, reliability and superior sustainability across its entire lifecycle, taking all sides into consideration.

Magma Group / UNICAT corporate video

Uniting Catalysts - UNICAT through its acquisition of Magma Group is revolutionizing catalytic manufacturing.

Ready-now solutions to help decarbonise syngas production

Syngas is a key building block of many essential chemical and fuels. Our low carbon solutions technologies help our customers in syngas production navigate and overcome the challenges they face in meeting emissions reduction targets. We provide tailored solutions that enable significant ...