You are currently viewing: Literature


Number: 84 Page:  «  1 [2] 3 »
Display: 

Literature

Isomalk-4 C7 paraffin isomerization technology

Isomalk-4 is a low-temperature isomerization technology for processing C7 paraffins contained in wide-range naphtha streams. In a conventional refinery configuration, C7 paraffins are distributed to the C5-C6 isomerization unit and the reformer. These components have a high X-factor that ...


IsoTherming® hydroprocessing technology

DuPont Sustainable Solutions offers IsoTherming® hydroprocessing technology, a commercially proven breakthrough process which provides refiners a significantly more economical means to produce today’s ultra low sulfur transportation fuels. DuPont acquired the technology in August ...


Make your feeds more valuable with FLEXICOKING™ technology

FLEXICOKING™ technology is a commercially proven, cost-effective, continuous fluidized bed process that thermally converts heavy feeds to lighter products and flexigas. FLEXICOKING technology, as an integrated process, offers great flexibility when upgrading residuum, as it provides ...


Maximize PX production while lowering feed and energy costs

The EMTAM℠ process is a breakthrough technology which maximizes production of valuable paraxylene product while lowering feed and energy costs. The highly paraxylene selective process is built off of commercially proven technologies. Unlike other toluene conversion processes, there is ...


Maximize PX production/reduce losses/debottleneck your facility

The XyMax℠-2 Process is the latest generation of vapor phase isomerization technology and is available for license by ExxonMobil directly, as well as by Axens, as part of the ParamaXSM technology suite for grassroots aromatics complexes. Lower operating costs, ultra-low xylenes losses, ...


Maximize the value of your naphtha feedstocks and downstream processes

New solutions for changing needs Lighten the burden of heavy feedstocks with Topsoe catalysts, process designs and technologies. If your refinery is like most, you’re under pressure to squeeze more value out of heavier feedstocks, and this presents new challenges for catalysts. To ...


Maximize Xylene Loop profitability

The LPI process is the latest generation of liquid phase isomerization technology and is available for license by ExxonMobil directly, as well as by Axens as part of the ParamaX® technology suite for grassroots aromatics complexes. Significant energy savings, ultra-low xylenes losses, ...


MECS® SolvR™ technology for regenerative SO2 recovery.

An energy efficient so absorption process with nearly zero SO2 emmissions. MECS® SolvR™ Technology employs an absorption solvent that is readily available, environmentally friendly and lower in cost than solvents used in other SO2 absorption processes. The technology can be ...


MECS® Sulfox™ process

The SULFOX™ process is based on the thermal and catalytic conversion of sulphur-bearing compounds into sulphuric acid. Depending on the feed gas conditions, customised plant types are offered. For low concentrations, the feed gas is preheated to the required catalyst inlet temperature ...


MECS® sulfuric acid and environmental technologies

Is the leading provider of proprietary process technology, speciality products and technical services to the global sulfuric acid industry. MECS® has provided best-in-class sulfuric acid plant processes, clean technologies, and specialty products to a wide distribution of industries ...


MEG regeneration & reclaiming technology

Benefits of Installing a MEG Recovery Unit - Strong increase in demand for natural gas leads to more development of deep offshore gas deposits with deeper wells, longer subsea pipelines, higher pressures and lower temperatures. Under such conditions, hydrate formation - that blocks flow ...


Methanol to gasoline technology

Simple, scalable gasoline production. Produce transportation fuels with low technical and project risk. ExxonMobil’s methanol to gasoline (MTG) process selectively converts methanol to a single fungible liquid fuel and a small LPG stream. The liquid product is conventional gasoline ...


MIDW™ catalyst technology and services

Better diesel yield. High performance dewaxing with MIDW™ catalyst technology and services. ExxonMobil’s MIDW™ catalyst technology and services provide high yields of low cloud point diesel. The process uses a proprietary catalyst that converts waxy paraffins to higher ...


Naphtha hydrotreating catalysts

Dealing with the more challenging streams. Criterion is a world-leading supplier of naphtha hydrotreating catalysts, the key to the effective removal of sulphur and nitrogen compounds from this valuable refinery stream. We supply about one-third by weight of all the naphtha hydrotreating ...


Optimizing CO2 capture, dehydration and compression facilities

The removal of CO2 by liquid absorbents is widely implemented in the field of gas processing, chemical production, and coal gasification. Many power plants are looking at post-combustion CO2 recovery to meet environmental regulations and to produce CO2 for enhanced oil recovery applications. ...


ProMax®

ProMax is built on over 40 years of continual research and development efforts. Our team of development engineers has consistently found innovative ways to model processes so that the end results accurately refl ect the actual operating conditions of gas processing, refi ning and chemical ...


PROSERNAT company profile

Advanced process solutions for oil and gas treatment - PROSERNAT, subsidiary of Heurtey Petrochem and part of IFP Group Technologies, is an engineering company specialized in Process Technologies Licensing and Modular Treatment Units Supply for the Oil & Gas Industry. Because each ...


PROSERNAT offers amine processes developed by TOTAL: AdvAmine™

In the frame of cooperation between TOTAL, IFP Energies nouvelles and PROSERNAT, PROSERNAT is today the licensor of the amine technology portfolio historically developed by SNEA(P), then ELF, now owned by TOTAL. AdvAmine™ processes have been developed for more than 50 years for all ...


Proserpack™ combined exchanger - separator

Proserpack compact integrated heat exchanger – separator, simplifies NGL recovery by implementing 3 process steps (2 heat exchangers and the turbo-expander suction drum) in a single equipment item. The heat exchanger is a PACKINOX multi-fluid plate exchanger.


Reactor Internals

State-of-the-art hardware to help optimize catalyst utilization, maximize cycle length and increase process safety. The performance of hydroprocessing reactors is determined not only by the catalyst loaded but also by the design of their internals. Shell Global Solutions’ internals ...


Reduced solid waste / more stable operations with increased protection

A high-performance, highly-stable catalyst is at the heart of the OlgoneSM process. This technology is designed to extend cycles of existing aromatic stream treaters and to reduce or eliminate the amount of solid waste generated. The outstanding performance of the Olgone process can lead ...


Refining catalysts – market-leading, high performance hydroprocessing solutions

Increasingly stringent fuel and environmental regulations, heavier crudes and feedstocks, and soaring energy demand have created complex, and sometimes conflicting, challenges for refiners operating hydroprocessing units. In response, many refiners are building new licensed units or revamping ...


Residue upgrading using ebullated-bed hydrocracking

Dealing more effectively with the bottom of the barrel is high on the refining industry’s agenda for the following reasons. Crude oil feedstocks are becoming heavier, which is making lighter crudes more expensive. Environmental pressures are undermining the market for heavy fuel ...


Residue upgrading using fixed-bed hydroconversion

Dealing more effectively with the bottom of the barrel is high on the refining industry’s agenda for a several reasons. Crude oil feedstocks are becoming heavier, which is making lighter crudes more expensive. Environmental pressures are undermining the market for heavy fuel oil. ...


SCANfining™ - meet increasingly stringent gasoline sulfur requirements

High octane. Ultra-low sulfur. SCANfining™ technology offers a cost-effective solution for meeting the low sulfur requirements of gasoline. The technology removes sulfur with minimum octane loss by utilizing a jointly developed ExxonMobil/Albemarle catalyst technology coupled with ...


Selecting the best solvent for gas treating

Selecting the best amine/solvent for gas treating is not a trivial task. There are a number of amines available to remove contaminants such as CO2, H2 S and organic sulfur compounds from sour gas streams. The most commonly used amines are monoethanolamine (MEA), diethanolamine (DEA), and ...


Shell sulphur technology platform

Consultancy and technologies to help take control of the sulphur paradox. The reduced availability of light and sweet crudes, and the consequential increase in the cost of such feedstocks, makes it more and more attractive for refiners to take in heavier and sourer feeds. However, there ...


Slash your hydrogen production costs

By utilizing low value, excess fuel gas, you can reduce your consumption of costly traditional hydrogen plant feedstocks, such as natural gas, LPG, butane or naphtha. Upgrading fuel gas produced onsite is a proven way to significantly cut the cost of your hydrogen production. Refinery ...


Solutions for a cleaner, safer tomorrow

Through its science-based Clean Technologies portfolio, DuPont offers focused solutions based on real-world experience. The company has dedicated itself to improvements in the areas of clean air and clean fuel, and this has led the company to seek out like-minded industry partners and ...


SPREX® & SPREX®CO2: bulk acid gas removal from highly sour gas

Process Principle: Bulk H2S or CO2 removal from highly sour gas by high pressure cryogenic distillation - Conventional distillation column with no hydrates or solid products formation - Separated acid gases are recovered liquid at high pressure and easily pumped back into reservoir - Final ...


SRU solutions Dynawave® reverse jet scrubber

Claus Sulfur Recovery Units (SRU) are found in various industries, such as refineries, natural gas processing plants, chemical plants, and coal gasification facilities. The Claus process is widely used to recover sulfur from HS containing gas streams. However, a Claus SRU can typically ...


Stratco® alkylation technical services

As the world leader in sulfuric acid alkylation, DuPont has extensive experience and know-how that can support your alkylation unit, either on an as needed or ongoing basis. Whether it’s troubleshooting, optimizing operations, supporting maintenance, turnaround consulting, training, ...


STRATCO® alkylation technology

In January 2003, DuPont acquired the alkylation division of STRATCO, Inc., a leading alkylation technology licensing company servicing oil refineries throughout the world. Assets acquired include the STRATCO® brand name and technology, intellectual property, a global customer base, ...


Stratco® XP2 technology for the stratco® contactor reactor

The STRATCO® XP2 technology is a Contactor™ reactor enhancement developed to improve the acid/hydrocarbon emulsion flow path near the tube bundle end of the Contactor™. In the current design, emulsion flow leaves the annulus between the Contactor™ shell wall and circulation ...


Sulfur recovery

With increasing environmental concerns, sulfur recovery has become one of the leading issues in emissions reduction. Bryan Research & Engineering’s process simulator, ProMax, contains a complete reactor suite for modeling kinetic (plug flow and stirred tank), equilibrium, conversion, ...


Sulfuric acid alkylation technology and services

Upgrading light olefins and isobutane to alkylate offers refiners an opportunity to increase their crude barrel value. Alkylate is a superior gasoline blendstock due to its high octane and low vapor pressure. ExxonMobil’s proven Sulfuric Acid Alkylation technology reacts propylene, ...


SweetSulf™ The high pressure redox desulfurization process

Reaction: Sour gas is contacted with an aqueous redox solution which extracts the H2S and converts it into solid elemental sulphur. Gas separation: Treated gas, free of H2S, is separated from the redox solution. Solid separation: Solid sulphur is filtered under pressure on a cartridge ...


Technical services agreement for sulphuric acid alkylation

A strategic partnership to maximise alkylation unit performance. Maximizing the performance of your alkylation unit is a high priority, but challenging in today’s world with a changing workforce, increased workloads, and technology advances. DuPont can help you answer your challenges ...


The TransPlus℠ 5 process - higher selectivity and yields

The TransPlusSM 5 process is a low-cost, high-conversion technology to upgrade C9+ aromatics and toluene to higher-value mixed xylenes and high purity benzene products. Benzene can also be coprocessed for additional mixed xylenes production. The TransPlus 5 process, which is based on a ...


Thermal conversion – converting the bottom of the barrel into higher-value products

Faced with falling demand for low-value products such as residue fuel oil, operators are seeking proven, cost-effective technologies to help increase the value of their residue streams by revamping and debottlenecking existing units. Shell Global Solutions’ thermal conversion processes ...